Shear stress-induced c-fos activation is mediated by Rho in a calcium-dependent manner

We aimed at elucidating the molecular basis of c-fos promoter activation in vascular endothelial cells (ECs) in response to shear stress, with emphases on Rho family GTPases (Rho, Cdc42, and Rac) and intracellular calcium. Dominant-negative and constitutively activated mutants of these GTPases were used to block the action of upstream signals and to activate the downstream pathways, respectively. The role of intracellular calcium was assessed with intracellular calcium chelators. Only Rho, but not Cdc42 or Rac, is involved in the shear stress induction of c-fos. This Rho-mediated shear-induction of c-fos is dependent on intracellular calcium, but not on the Rho effector p160ROCK or actin filaments. While the inhibition of p160ROCK and its ensuing disruption of actin filaments decreased the basal c-fos activity in static ECs (no flow), it did not affect the shear-inductive effect. The calcium chelator BAPTA-AM inhibits the shear-induction, as well as the static level, of c-fos activity.     

Transport features, reaction kinetics and receptor biomechanics controlling selectin and integrin mediated cell adhesion

The distinct and overlapping roles of adhesion molecules belonging to the selectin and integrin families control the rate of leukocyte adhesion to stimulated vascular endothelial cells under hydrodynamic shear flow. Crystal structures have appeared for some of these interactions which complement molecular biology experiments, and clarify the molecular mechanism of the receptor-ligand binding interactions. Binding affinity data have also appeared using surface plasmon resonance and single-molecule biophysics experiments. These studies confirm and extend the predictions of previous experiments carried out in parallel-plate flow chambers, and cone and plate viscometers. This review discusses the current state of understanding on how molecular bond formation rates coupled with cellular and hydrodynamic features regulate leukocyte binding to endothelial cells.     

Heparan sulfate proteoglycan mediates shear stress-induced endothelial gene expression in mouse embryonic stem cell-derived endothelial cells

It has been shown that shear stress plays a critical role in promoting endothelial cell (EC) differentiation from embryonic stem cell (ESC)-derived ECs. However, the underlying mechanisms mediating shear stress effects in this process have yet to be investigated. It has been reported that the glycocalyx component heparan sulfate proteoglycan (HSPG) mediates shear stress mechanotransduction in mature EC. In this study, we investigated whether cell surface HSPG plays a role in shear stress modulation of EC phenotype. ESC-derived EC were subjected to shear stress (5 dyn/cm(2)) for 8 h with or without heparinase III (Hep III) that digests heparan sulfate. Immunostaining showed that ESC-derived EC surfaces contain abundant HSPG, which could be cleaved by Hep III. We observed that shear stress significantly increased the expression of vascular EC-specific marker genes (vWF, VE-cadherin, PECAM-1). The effect of shear stress on expression of tight junction protein genes (ZO-1, OCLD, CLD5) was also evaluated. Shear stress increased the expression of ZO-1 and CLD5, while it did not alter the expression of OCLD. Shear stress increased expression of vasodilatory genes (eNOS, COX-2), while it decreased the expression of the vasoconstrictive gene ET1. After reduction of HSPG with Hep III, the shear stress-induced expression of vWF, VE-cadherin, ZO-1, eNOS, and COX-2, were abolished, suggesting that shear stress-induced expression of these genes depends on HSPG. These findings indicate for the first time that HSPG is a mechanosensor mediating shear stress-induced EC differentiation from ESC-derived EC cells.     

Correlation of thrombosis growth rate to pathological wall shear rate during platelet accumulation

Local hemodynamics may strongly influence atherothrombosis, which can lead to acute myocardial infarction and stroke. The relationship between hemodynamics and thrombosis during platelet accumulation was studied through an in vitro flow system consisting of a stenosis. Specifically, wall shear rates (WSR) ranging from 0 to 100,000 s^?1 were ascertained through computations and compared with thrombus growth rates found by image analysis for over 5,000 individual observation points per experiment. A positive correlation (P < 0.0001) was found between thrombus accumulation rates and WSR up to 6,000 s^?1, with a decrease in growth rates at WSR >6,000 s^?1 (P < 0.0001). Furthermore, growth rates at pathological shear rates were found to be two to four times greater than for physiological arterial shear rates below 400 s^?1. Platelets did not accumulate for the first minute of perfusion. The initial lag time, before discernible thrombus growth could be found, diminished with shear (P < 0.0001). These studies show the quantitative increase in thrombus growth rates with very high shear rates in stenoses onto a collagen substrate. Biotechnol. Bioeng. 2012; 109: 2642–2650. © 2012 Wiley Periodicals, Inc.     

Shear bond strength between different materials bonded with two resin cements

doi: 10.1111/j.1741‐2358.2011.00565.x
Shear bond strength between different materials bonded with two resin cements Background: The aim of this study was to compare the shear bond strength between Ni–Cr alloy specimens bonded to air‐abraded Ni–Cr, bur‐abraded Ni–Cr, etched ceramic and etched enamel substrates using the resin cements RelyX ARC or Enforce. Materials and methods: Ni–Cr specimens were made and sandblasted with Al₂O₃ airborne‐particles. Disc‐shaped patterns were made for each of the four experimental substrates: Ni–Cr treated with Al₂O₃ airborne‐particles, Ni–Cr treated with diamond bur abrasion, etched enamel and etched ceramic. Results: Significant differences in shear bond strength were found between the different materials and luting agents evaluated. The Ni–Cr alloy cylinders bonded to Ni–Cr surfaces sandblasted with 50 μm Al₂O₃ particles and bonded with Enforce achieved the highest bond strength when compared with other substrates (28.9 MPa, p < 0.05). Bur‐abraded metal discs had lowest values, regardless the cement used (2.9 and 6.9 MPa for RelyX and Enforce, respectively). Etched enamel and etched ceramic had similar shear bond strengths within cement groups and performed better when RelyX was used. Conclusions: Bonding Ni–Cr to Ni–Cr and ceramic may result in similar and higher bond strength when compared to Ni–Cr/enamel bonding. For metal/metal bonding, higher shear bond strength was achieved with resin cement Enforce, and for metal/ceramic and metal/enamel bonding, RelyX had higher results.     

Genome‐wide association analysis for quantitative trait loci influencing Warner–Bratzler shear force in five taurine cattle breeds

We performed a genome‐wide association study for Warner–Bratzler shear force (WBSF), a measure of meat tenderness, by genotyping 3360 animals from five breeds with 54 790 BovineSNP50 and 96 putative single‐nucleotide polymorphisms (SNPs) within μ‐calpain [HUGO nomenclature calpain 1, (mu/I) large subunit; CAPN1] and calpastatin (CAST). Within‐ and across‐breed analyses estimated SNP allele substitution effects (ASEs) by genomic best linear unbiased prediction (GBLUP) and variance components by restricted maximum likelihood under an animal model incorporating a genomic relationship matrix. GBLUP estimates of ASEs from the across‐breed analysis were moderately correlated (0.31–0.66) with those from the individual within‐breed analyses, indicating that prediction equations for molecular estimates of breeding value developed from across‐breed analyses should be effective for genomic selection within breeds. We identified 79 genomic regions associated with WBSF in at least three breeds, but only eight were detected in all five breeds, suggesting that the within‐breed analyses were underpowered, that different quantitative trait loci (QTL) underlie variation between breeds or that the BovineSNP50 SNP density is insufficient to detect common QTL among breeds. In the across‐breed analysis, CAPN1 was followed by CAST as the most strongly associated WBSF QTL genome‐wide, and associations with both were detected in all five breeds. We show that none of the four commercialized CAST and CAPN1 SNP diagnostics are causal for associations with WBSF, and we putatively fine‐map the CAPN1 causal mutation to a 4581‐bp region. We estimate that variation in CAST and CAPN1 explains 1.02 and 1.85% of the phenotypic variation in WBSF respectively.     

Effects of near‐bed turbulence on the suspension and settlement of freshwater dreissenid mussel larvae

相似文献   

木质素含量对四倍体刺槐嫩枝插穗扦插生根的影响

以四倍体刺槐1年生嫩枝插条为试验材料,分析插穗木质素含量与其横截面剪切强度、相关酶活性和激素关系,并探究不同木质素含量的插穗扦插生根性状的效应,为四倍体刺槐扦插选择合适插穗提供理论参考。结果表明:(1)插穗的木质素含量与其横截面剪切强度呈极显著正相关关系(相关系数为0.99),根据剪切强度可以间接地估算其木质素含量。(2)插穗的木质素含量与其POD和PPO活性呈极显著正相关关系(POD相关系数为0.98,PPO相关系数为0.92),也与激素ABA含量呈极显著的正相关关系(相关系数为0.97),而同IAA、IBA呈不显著的相关性,根据POD和PPO活性以及激素ABA含量对生根的影响可以推测木质素含量对生根有一定的影响。(3)不同木质素含量的插穗生根性状差异显著,木质素含量为19.47%时插穗生根能力最强,其插穗生根率为60.39%,平均每株生根量为9.70个,根长为4.85cm;木质素含量为10.60%时插穗生根能力最差。(4)生根性状最佳时的木质素含量为19.47%,其对应的剪切强度范围为40～50kg。     

Impedance-based outflow boundary conditions for human carotid haemodynamics

In this study, we develop structured tree outflow boundary conditions for modelling the human carotid haemodynamics. The model geometry was reconstructed through computerised tomography scan. Unsteady-state computational fluid dynamic analyses were performed under different conditions using a commercial software package ADINA R&D, Inc., (Watertown, MA, USA) in order to assess the impact of the boundary conditions on the flow variables. In particular, the results showed that the peripheral vessels massively impact the pressure while the flow is relatively unaffected. As an example of application of these outflow conditions, an unsteady fluid-structure interaction (FSI) simulation was carried out and the dependence of the wall shear stress (WSS) on the arterial wall compliance in the carotid bifurcation was studied. In particular, a comparison between FSI and rigid-wall models was conducted. Results showed that the WSS distributions were substantially affected by the diameter variation of the arterial wall. In particular, even similar WSS distributions were found for both cases, and differences in the computed WSS values were also found.     

Prostaglandin E2 modulates F-actin stress fiber in FSS-stimulated MC3T3-E1 cells in a PKA-dependent manner

The effect of prostaglandin E2（PGE2） on bone mass has been well-established in vivo. Previous studies have showed that PGE2 increases differentiation, proliferation, and regu- lates cell morphology through F-actin stress fiber in statically cultured osteoblasts. However, the effect of PGE2 on osteo- blasts in the presence of fluid shear stress （FSS）, which could better uncover the anabolic effect of PGEz in vivo, has yet to be examined. Here, we hypothesized that PGE2 modulates F-actin stress fiber in FSS-stimulated MC3T3-E1 osteoblastic cells through protein kinase A （PKA） pathway. Furthermore, this PGE2-induced F-actin remodeling was associated with the recovery of cellular mechanosensitivity. Our data showed that treatment with 10 nM dmPGE2 for 15 rain significantly suppressed the F-actin stress fiber intensity in FSS-stimulated cells in a PKA-dependent manner. In addition, dmPGE2 treatment enhanced the cells＇ calcium peak magnitude and the percentage of responding cells in the second FSS stimulation, though these effects were abolished and attenuated by co-treatment with phalloidin. Our results demonstrated that 10 nM dmPGE2 was able to accelerate the ＇reset＇ process of F-actin stress fiber to its pre-stimulated level partially through PKA pathway, and thus promoted the recovery of cellular mechanosensitivity. Our finding provided a novel cellular mechanism by which PGE2 increased bone forma- tion as shown in vivo, suggesting that PGE2 could be a potential target for treatments of bone formation-related diseases.