Control of Meloidogyne chitwoodi in Potato with Shank-injected Metam Sodium and other Nematicides

Metam sodium (MS) is often applied to potato fields via sprinkler irrigation systems (water-run, WR) to reduce propagules of soil-borne pathogenic fungi, particularly Verticillium dahliae, to prevent yield loss from potato early dying disease. However, this procedure has not been effective for controlling quality defects in tubers caused by Columbia root-knot nematode (Meloidogyne chitwoodi). In five trials from 1996 to 2001, application of MS by soil shank injection (SH) provided better control and tuber quality than that generally obtained by WR MS, in three of five trials. Results were similar when SH MS was injected at one (41–45 cm), two (15 and 30 cm) or three (15, 30 and 45 cm) depths. In the two trials where SH metam potassium was tested, culls were reduced to 3% and 0% and were equivalent to those resulting from a similar rate in kg a.i./ha of SH MS. A shank-injected tank mix of MS plus ethoprop EC and SH MS plus in-season chemigation applications of oxamyl provided acceptable control in trials where SH MS alone was inadequate. In-furrow application of aldicarb at planting following SH MS did not appear to increase performance. Most consistent control (0–2% culled tubers in five trials) occurred when SH MS at 280 liters/ha was used together with 1,3- dichloropropene (140 liters/ha), applied simultaneously or sequentially. This was similar to combinations of 1,3-D and WR MS, but SH MS may be preferred under certain conditions.     

Dynamic 3D scanning as a markerless method to calculate multi-segment foot kinematics during stance phase: Methodology and first application

Multi-segmental foot kinematics have been analyzed by means of optical marker-sets or by means of inertial sensors, but never by markerless dynamic 3D scanning (D3DScanning). The use of D3DScans implies a radically different approach for the construction of the multi-segment foot model: the foot anatomy is identified via the surface shape instead of distinct landmark points. We propose a 4-segment foot model consisting of the shank (Sha), calcaneus (Cal), metatarsus (Met) and hallux (Hal). These segments are manually selected on a static scan. To track the segments in the dynamic scan, the segments of the static scan are matched on each frame of the dynamic scan using the iterative closest point (ICP) fitting algorithm. Joint rotations are calculated between Sha–Cal, Cal–Met, and Met–Hal. Due to the lower quality scans at heel strike and toe off, the first and last 10% of the stance phase is excluded. The application of the method to 5 healthy subjects, 6 trials each, shows a good repeatability (intra-subject standard deviations between 1° and 2.5°) for Sha–Cal and Cal–Met joints, and inferior results for the Met–Hal joint (>3°). The repeatability seems to be subject-dependent. For the validation, a qualitative comparison with joint kinematics from a corresponding established marker-based multi-segment foot model is made. This shows very consistent patterns of rotation. The ease of subject preparation and also the effective and easy to interpret visual output, make the present technique very attractive for functional analysis of the foot, enhancing usability in clinical practice.     

Phenotypic analysis of Phytophthora parasitica by using high throughput phenotypic microarray北大核心CSCD

［Objective］We studied the phenotypic characterization of Phytophthora parasitica Dastur var.nicotianae．［Methods］Phenotypic characterization of the pathogen was studied to provide information for disease management program by using BIOLOG phenotype MicroArray(PM).Using PM plates 1 to 10,950 different phenotypic characterizations were tested.［Results］P．parasitica was able to metabolize 74% of tested carbon sources,96% of nitrogen sources,100%of sulfur sources,and 98%of phosphorus sources.Most informative utilization patterns for carbon sources of P．parasitica were organic acids and carbohydrates,and for nitrogen were various amino acids.The pathogen presented 285 different nitrogen pathways.It had wide range adaptabilities in osmolytes with up to 1%sodium chloride,up to 3%potassium chloride,up to 5%sodium sulfate,up to 20%ethylene glycol,up to 2%sodium formate,up to 5% urea,and up to 2% sodium lactate.It also exhibited active metabolism under pH values between 3.5 and 10,with optimal pH of around 7.0.The pathogen showed both decarboxylase and deaminase activities in the presence of various amino acids.［Conclusion］These phenotypic characterizations of P．parasitica provided the theoretical basis for the next study of the pathogen in physiology and metabolism,and provided potential new way for tobacco black shank management.     

烟草疫霉拮抗菌枯草芽孢杆菌21b菌株的分离鉴定及其生物学特性研究

【目的】为了控制烟草疫霉(Phytophthora nicotianae)引起的烟草黑胫病对烟草生产造成的危害。【方法】采用稀释平板法从贵州省毕节地区烟草根际土壤中分离筛选拮抗烟草疫霉的细菌菌株,然后经形态观察、Biolog鉴定及16S rRNA基因序列分析,对分离菌株进行鉴定,同时测定抗菌谱,单因子变量分析、优化生长条件。【结果】共分离得到44株拮抗烟草疫霉的细菌菌株,其中菌株21b对烟草黑胫病菌菌丝生长的抑制率达78.33%,鉴定为枯草芽孢杆菌(Bacillus subtilis)。该菌株对烟草青枯病菌(Ralstonia solanacearum)、烟草灰霉病菌(Botrytis cinerea)、烟草赤星病菌(Alternaria alternate)和烟草炭疽病菌(Colletotrichum destructivum)均具有拮抗作用,抑菌圈大小分别为19.5、18.2、14.6和13.4 mm,最佳的发酵条件为:温度30°C、p H 7.0–8.0、装液量12%、盐浓度0.5%。【结论】分离筛选到一株对烟草寄生疫霉有较强拮抗活性的细菌菌株,为进一步开发烟草黑胫病的生防菌剂提供了菌种资源。     

Black shank resistant tobacco by silencing of glutathione S-transferase

A glutathione S-transferase gene was amplified from cDNA of Nicotiana tabacum roots infected with Phytophthora parasitica var. nicotianae. The gene was cloned in sense and anti-sense orientation to an RNAi vector for induced gene silencing, and reduced expression of the gene was detected by RT-PCR. A statistically significant increase in resistance of N. tabacum to infection following gene silencing was found for glutathione S-transferase-silenced plants compared with control plants. Some defense genes were up-regulated in glutathione S-transferase-silenced plants during the interaction with the pathogen. This is the first evidence of the role of glutathione S-transferase as negative regulator of defense response.     

Mapping QTL for growth and shank traits in chickens divergently selected for high or low body weight

An F₂ population (695 individuals) was established from broiler chickens divergently selected for either high (HG) or low (LG) growth, and used to localize QTL for developmental changes in body weight (BW), shank length (SL9) and shank diameter (SD9) at 9 weeks. QTL mapping revealed three genome‐wide QTL on chromosomes (GGA) 2, 4 and 26 and three suggestive QTL on GGA 1, 3 and 5. Most of the BW QTL individually explained 2–5% of the phenotypic variance. The BW QTL on GGA2 explained about 7% of BW from 3 to 7 weeks of age, while that on GGA4 explained 15% of BW from 5 to 9 weeks. The BW QTL on GGA2 and GGA4 could be associated with early and late growth respectively. The GGA4 QTL also had the largest effect on SL9 and SD9 and explained 7% and 10% of their phenotypic variances respectively. However, when SL9 and SD9 were corrected with BW9, a shank length percent QTL was identified on GGA2. We identified novel QTL and also confirmed previously identified loci in other chicken populations. As the foundation population was established from commercial broiler strains, it is possible that QTL identified in this study could still be segregating in commercial strains.     

青枯病与黑胫病混发烟株发病茎秆组织微生物群落结构与多样性

为了解青枯病与黑胫病混发烟株茎秆组织的微生物菌群组成,该文采用Illumina Miseq高通量测序技术研究了青枯病与黑胫病混发烟株发病茎秆和健康烟株未发病茎秆组织的真菌、细菌群落结构与多样性.结果表明:(1)发病茎秆组织中真菌群落丰富度与多样性较健康茎秆组织低,细菌群落丰富度与多样性较健康茎秆组织高.(2)健康茎秆组...     

烟草黑胫病生物防治研究进展(综述)

随着烟草生产向无公害发展,黑胫病作为烟草生产上的主要病害之一,其生物防治取得较大的进展。本文就其诱抗剂、生防菌等生物防治方面的研究作简要综述。