The formation of titan cells in Cryptococcus neoformans depends on the mouse strain and correlates with induction of Th2‐type responses

Cryptococcus neoformans is a pathogenic yeast that can form titan cells in the lungs, which are fungal cells of abnormal enlarged size. Little is known about the factors that trigger titan cells. In particular, it is not known how the host environment influences this transition. In this work, we describe the formation of titan cells in two mouse strains, CD1 and C57BL/6J. We found that the proportion of C. neoformans titan cells was significantly higher in C57BL/6J mice than in CD1. This higher proportion of titan cells was associated with a higher dissemination of the yeasts to the brain. Histology sections demonstrated eosinophilia in infected animals, although it was significantly lower in the CD1 mice which presented infiltration of lymphocytes. Both mouse strains presented infiltration of granulocytes, but the amount of eosinophils was higher in C57BL/6J. CD1 mice showed a significant accumulation of IFN‐γ, TNF‐α and IL17, while C57BL/BL mice had an increase in the anti‐inflammatory cytokine IL‐4. IgM antibodies to the polysaccharide capsule and total IgE were more abundant in the sera from C57BL/6J, confirming that these animals present a Th2‐type response. We conclude that titan cell formation in C. neoformans depends, not only on microbe factors, but also on the host environment.     

Validating and improving elastic network models with molecular dynamics simulations

Elastic network models (ENMs) are a class of simple models intended to represent the collective motions of proteins. In contrast to all‐atom molecular dynamics simulations, the low computational investment required to use an ENM makes them ideal for speculative hypothesis‐testing situations. Historically, ENMs have been validated via comparison to crystallographic B‐factors, but this comparison is relatively low‐resolution and only tests the predictions of relative flexibility. In this work, we systematically validate and optimize a number of ENM‐type models by quantitatively comparing their predictions to microsecond‐scale all‐atom simulations of three different G protein coupled receptors. We show that, despite their apparent simplicity, well‐optimized ENMs perform remarkably well, reproducing the protein fluctuations with an accuracy comparable to what one would expect from all‐atom simulations run for several hundred nanoseconds. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

Prenatal data impacts common bottlenose dolphin (Tursiops truncatus) growth parameters estimated by length‐at‐age curves

Compilation of marine mammal demographic data is central to management efforts. However, marine mammal length‐at‐age growth curves demonstrate limitations. Physiological growth parameters of terrestrial mammals are typically estimated using curvilinear models fit to size‐at‐age data along a time series from conception to senescence. The difficulty of collecting and aging prenatal cetaceans is addressed here, and growth parameters of common bottlenose dolphins (Tursiops truncatus) along coastal Texas were estimated using length‐at‐age information from a broader scope of age classes, including late‐term fetuses. A Gompertz growth curve fit to pre‐ and postnatal data underestimated size parameters, but demonstrated similar growth rate constants (k) to an exclusively postnatal model. However, when growth parameters were broken out, the absolute growth rate (G) and rate of growth decay (g) decreased (0.44 from 0.27 and 0.55 from 0.39, respectively), which underscores the importance of reporting k in its expanded form (G/g). Although the Gompertz fits most age classes well, it cannot explain growth in all age classes. We argue that a novel sigmoidal model would be more useful for inference.     

Craniometric variation of some Mediterranean and Atlantic populations of Stenella coeruleoalba (Mammalia,Delphinidae): A three‐dimensional geometric morphometric analysis

The variability of cranial features of Atlantic and Mediterranean samples of Stenella coeruleoalba was examined using a three‐dimensional geometric morphometric approach. Data were collected on 79 skulls from the upper and middle Mediterranean Sea, the Atlantic French coasts, and Scotland. Three‐dimensional x, y, and z coordinates of 27 landmarks were recorded on each left half skull using a Microscribe 3‐D digitizer. All configurations were rotated, centered, and scaled, and residuals from the mean configuration were analyzed through multivariate analyses of variance. Mahalanobis distances among populations were used to evaluate phenetic relationships. Consensus configurations were compared to visualize shape differences among samples. Analyses revealed significant differences among populations, a clear distinction of the Scottish coasts dolphins from the other samples, and a closer relationship of the dolphins from the French coasts to the Mediterranean populations than to the Scottish one. Shape differences are mainly concentrated in the rostral and in the occipital regions of the skull. Phylogenetic and adaptive factors were invoked as possible causes of the variation patterns.     

Extended Producer Responsibility in Thailand

Waste electrical and electronic equipment (WEEE) sheds light on the dimmer side of production and consumption patterns in modern societies. The rapid increase in its quantity and complexity contribute to the challenges it poses to solid waste management systems. Several members of the Organisation for Economic Co‐operation and Development (OECD) have relied on the principle of extended producer responsibility (EPR) to tackle the issue, with varying degrees of success. Several non‐OECD countries, including Thailand, are now developing WEEE programs and are looking for lessons from these first movers. This case study aims to provide an understanding both of this context and of the EPR program for WEEE proposed for Thailand. It finds that EPR mechanisms in general, and the proposed buy‐back system financed by product fees in Thailand in particular, have a strong potential to consolidate WEEE collection for the formal recycling sector by offering end users monetary incentives. On the negative side, this is an expensive combination of policy instruments, and the institutional design of the governmental fund is rigid. The policy proposal also contains no mechanism for product redesign—one of the objectives in the national WEEE strategy. This article suggests that the effectiveness of the policy might benefit from more flexibility at the compliance scheme level, in order to lessen the monopoly of the governmental fund, as well as the introduction of differentiated fees to promote environmentally friendly products.     

Patterns of early succession on bare peat in a Swiss mire after a bog burst

Questions: How does plant diversity (species richness, species abundance and rate of change) evolve in early succession on bare peat? Does succession converge towards one equilibrium stage or end up in several stages? Is there a regular pattern in succession velocity? Location: A mire in the calcareous Jura Mountains of northwest Switzerland. Method: Twenty‐one 1‐m² permanent plots on bare peat were used to monitor temporal stages over a 21‐year period (1988 to 2008) in a Swiss mire where a slide occurred in 1987. Species diversity and life forms were analysed based on Shannon's equitability index and cover. We used classification and metric ordination techniques to investigate patterns of successional rates and trends. The high temporal resolution of the survey allowed the pattern of succession velocity to be analysed. Results: Species richness increased continuously over the 21 years of succession. The highest cover throughout the study period was the life form sedge. Time trajectories of the 21 plots revealed three alternative pathways towards intermediate equilibrium stages in the first years, still not converging in the later stages. Changes in succession velocity reached a first maximum about 6 years after the slide had occurred and a second maximum 12 years later.     

Colours of domestication

During the last decade, coat colouration in mammals has been investigated in numerous studies. Most of these studies addressing the genetics of coat colouration were on domesticated animals. In contrast to their wild ancestors, domesticated species are often characterized by a huge allelic variability of coat‐colour‐associated genes. This variability results from artificial selection accepting negative pleiotropic effects linked with certain coat‐colour variants. Recent studies demonstrate that this selection for coat‐colour phenotypes started at the beginning of domestication. Although to date more than 300 genetic loci and more than 150 identified coat‐colour‐associated genes have been discovered, which influence pigmentation in various ways, the genetic pathways influencing coat colouration are still only poorly described. On the one hand, similar coat colourations observed in different species can be the product of a few conserved genes. On the other hand, different genes can be responsible for highly similar coat colourations in different individuals of a species or in different species. Therefore, any phenotypic classification of coat colouration blurs underlying differences in the genetic basis of colour variants. In this review we focus on (i) the underlying causes that have resulted in the observed increase of colour variation in domesticated animals compared to their wild ancestors, and (ii) the current state of knowledge with regard to the molecular mechanisms of colouration, with a special emphasis on when and where the different coat‐colour‐associated genes act.     

A Durable Alternative for Proton‐Exchange Membranes: Sulfonated Poly(Benzoxazole Thioether Sulfone)s

To develop a durable proton‐exchange membrane (PEM) for fuel‐cell applications, a series of sulfonated poly(benzoxazole thioether sulfone)s ( SPTESBOs) are designed and synthesized, with anticipated good dimensional stability (via acid–base cross linking), improved oxidative stability against free radicals (via incorporation of thioether groups), and enhanced inherent stability (via elimination of unstable end groups) of the backbone. The structures and the degree of sulfonation of the copolymers are characterized using Fourier‐transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy (¹H NMR and ¹⁹F NMR). The electrochemical stabilities of the monomers are examined using cyclic voltammetry in a typical three‐electrode cell configuration. The physicochemical properties of the membranes vital to fuel‐cell performance are also carefully evaluated under conditions relevant to fuel‐cell operation, including chemical and thermal stability, proton conductivity, solubility in different solvents, water uptake, and swelling ratio. The new membranes exhibit low dimensional change at 25°C to 90°C and excellent thermal stability up to 250°C. Upon elimination of unstable end groups, the co‐polymers display enhanced chemical resistance and oxidative stability in Fenton's test. Further, the SPTESBO‐HFB‐60 (HFB‐60=hexafluorobenzene, 60 mol% sulfone) membrane displays comparable fuel‐cell performance to that of an NRE 212 membrane at 80°C under fully humidified condition, suggesting that the new membranes have the potential to be more durable but less expensive for fuel‐cell applications.