Effects of lignin content on the properties of lignocellulose-based biocomposites

The paper is focused on the analysis of the behaviour of biocomposites (biodegradable composites) which are reinforced with different fillers fractions, with varying lignin contents. These materials have been carried-out by extrusion and injection moulding. The matrix, an aromatic copolyester (polybutylene adipate-co-terephthalate), is biodegradable. The lignocellulose fillers are a by-product of an industrial fractionation process of wheat straw. From the raw agro-material and by lignin extractions, various fillers fractions have been obtained by varying the fractionation conditions, both on the liquid media (aqueous or organic) and on the temperature. The fillers lignin contents vary from 30 to 14 wt% with a resultant increase of the cellulose content. We have analysed the impact of the different extraction conditions on the fillers surface and size distribution, and also on the final thermal and mechanical properties of the biocomposites. These materials present significant differences of behaviour which can fulfil some requirements for applications, such as non-food packaging or other short-lived applications (agriculture, sport …) where long-lasting polymers are not entirely adequate.     

Pitfalls in the sample preparation and analysis of N-acylethanolamines

N-acylethanolamines (NAEs) are a group of lipid mediators synthesized in response to a number of physiological and pathological stimuli. Because of the low tissue concentrations of NAEs, analyses often include liquid extraction followed by solid-phase extraction and subsequent quantitation by LC/MS or GC/MS. Reported levels of NAEs vary considerably, however, and often no explanation is given for these discrepancies. Brought on by difficulties encountered during method development, the effects of using four different brands of silica-containing solid phase extraction (SPE) columns and five different brands of chloroform for sample preparation were investigated. Considerable variation in the retention and recoveries of seven NAEs and 2-arachidonoylglycerol existed between the SPE columns. Furthermore, it was found that some chloroforms contained quantifiable amounts of N-palmitoylethanolamine and N-stearoylethanolamine. Finally, it was found that use of one of the chloroforms resulted in a loss of N-oleoylethanolamine from solution due to addition of chlorine to the ω-9 bond. The identity of this reaction product was confirmed by LC-MS/MS and NMR. It is recommended that these aspects of sample preparation and analysis should be thoroughly validated during method development and the relevant information on specific brands used be reported in future communications in order to better estimate the validity of reported quantitative data.     

Human Health Risk Assessment of Soils Contaminated with Metal(loid)s by Using DGT Uptake: A Case Study of a Former Korean Metal Refinery Site

The human health risk of soils contaminated with As, Pb, Cu, and Zn was evaluated based on pseudo-total concentrations of metal(loid)s, the physiologically based extraction test (PBET), and diffusive gradients in thin films (DGT). Non-carcinogenic (NCR) and carcinogenic (CR) risks exceeded the U.S. Environmental Protection Agency criteria under both the residential and non-residential scenarios. Human bioavailable concentrations (PBET) were much lower than pseudo-total concentrations. The Hazardous Index of NCR (HI (NCR)) for the PBET in the studied soils was 67% and 94% less than that for pseudo-total concentration, respectively, under the non-residential and residential scenarios. Similarly, CR for the PBET was also 65% and 93% less for the two soils. The concentration of metal(loid)s accumulated in the DGT resin was highly correlated with the PBET-extractable concentration (R² > 0.649). Therefore, for both the CR and HI (NCR), the DGT-calculated risk was linearly related to the PBET-calculated risk for the studied soils under both scenarios. The results suggest that DGT uptake and PBET-extracted concentrations are good surrogates for risk estimation and that both J1 and J2 soils require remediation before their use for residential or non-residential purposes.     

Testing parameter sensitivities and uncertainty analysis of Biome-BGC model in simulating carbon and water fluxes in broadleaved-Korean pine forests

生态过程模型的发展为研究者在长时间序列和区域尺度的研究提供了便利, 但模型模拟的准确性受到模型自身结构、模型参数估计合理性的影响。敏感性分析能够定量或定性筛选出对模型模拟结果影响较大的敏感参数, 是模型参数校准过程中的重要工具, 也是建模和应用的先决条件。该文以阔叶红松林为研究对象, 采用全局敏感性分析方法——傅里叶幅度灵敏度检验扩展法(EFAST)对Biome-BGC模型的生理生态参数进行了敏感性分析, 分别分析了红松(Pinus koraiensis)和阔叶树的净初级生产力(NPP)、蒸散(ET)对参数变化的敏感性。结果表明: (1)模拟红松NPP的不确定性高于阔叶树, 但二者的模拟ET的不确定性均较小。阔叶树的NPP和ET对生理生态参数的敏感性总体上都小于红松。(2)无论是红松、阔叶或其他植被类型, 模拟NPP均表现出对叶片碳氮比、细根碳氮比、比叶面积(SLA)和冠层截留系数的敏感性, 这4个参数的高敏感性主要是由模型自身结构所决定的, 与植被类型和研究地区的关系较小。对模拟ET而言, 细根与叶片碳分配比、新茎与新叶碳分配比和SLA均是影响红松和阔叶树ET的敏感参数, 但红松ET主要受参数与参数间的二阶或多阶交互作用的间接影响, 而阔叶树ET则主要是受到敏感参数直接效应的影响。(3)除了上述影响红松和阔叶树碳水通量的共性参数外, 诸如核酮糖-1,5-二磷酸羧化酶中叶氮含量、叶片与细根周转率、所有叶面积与投影叶面积之比等也是对模拟结果有影响的重要参数, 但是其敏感程度随物种不同和研究区不同而不同, 所以这类参数可以根据具体情况进行参数本地化, 对于其他不敏感参数则可以采用模型缺省值。     

Scarcity-weighted global land and metal footprints

Resource scarcity poses an increasing threat to the supply security of modern economies. Some grand challenges ahead are the limits to agricultural expansion and the geologic scarcity of metals. To better understand the drivers behind land and metal depletion, footprint-type indicators are gaining importance. Such indicators, however, fail to differentiate between vastly different degrees of resource availability across regions. Using crop suitability areas and metal reserve base data, we calculate scarcity-weighted land and metal footprints for the major economies with the EXIOBASE global multi-regional input-output model. Scarcity-weighting causes a significant reordering of the global rankings of countries for both land and metal footprints. Land scarcity focuses mostly on cereals (∼54% from the total agricultural land used) and oil crops (∼15%), the former being notably affected by water scarcity issues in Asia and the Middle East. Metal scarcity focuses on copper ores (∼69%) and iron (∼11%), the former being a globally scarce metal impacting multiple economies. The large impact of scarcity-weighting suggests that, while non-weighted resource footprints are a valid proxy of resource use, these are not always aligned with further implications of resource depletion and supply security. In this sense, scarcity-weighting can offer an initial overview of those countries where analyses at finer scales may be more valuable. Our results also show that international trade is a major driver of land and metal depletion in some developing regions. This highlights the intersection of environmental justice and globalization, as the burden of resource depletion often falls into poorer regions which critically rely on exports.     

Preparing nuclei from cells in monolayer cultures suitable for counting and for following synchronized cells through the cell cycle

A procedure is described for preparing nuclei from cells in monolayer culture so that they may be counted using an electronic particle counter. It takes only 10 to 15 min, and consists of swelling the cells in hypotonic buffer and then lysing them with the quaternary ammonium salt, ethylhexadecyldimethylammonium bromide. The cells are completely lysed, yielding a suspension of clean single nuclei which is stable, free of debris, and easily counted. The method was developed for a cell line of epithelial origin (MCF-7), which is often difficult to trypsinize to single cells. It works equally well at all cell densities up to and beyond confluence, and has been used with a variety of cells in culture, including 3T3 cells, bovine macrophages, rat mammary epithelial cells, mouse mammary tumor cell lines, and human fibroblasts. The size of the nuclei produced by this procedure is related to their DNA content, and the method is thus suitable for following cultures of synchronized cells through the cell cycle, and for performing differential counts of cells with substantial differences in DNA content.     

Succession of mycorrhizal fungi in stands of Pinus sylvestris in the Netherlands

The mycorrhizal mycoflora was investigated in 35 stands of Pinus sylvestris in three types of young (4-13 yr) and three of old (50-80 yr) stands in the Netherlands, differing in number of rotations and soil type. A plot of 1050 m² (30 m x 35 m) within each stand was searched for carpophores during the autumns of 1986 and 1987. 10 soil samples per plot were taken in October 1987 in order to assess the mycorrhizal status of the tree roots. The composition of mycorrhizal mycoflora in the different plots was subjected to TWINSPAN cluster analysis and Detrended Correspondence Analysis. Plot groupings generated by these analyses largely parallelled the stand types, indicating that each stand type has its own mycoflora. Differences in myco-floristic composition between stand types were parallelled by differences in the composition of green vegetation. The young stand types had 3.5–27 x more carpophores and 1.4–6.8 x more species than two of the old stand types One old stand type was intermediate. Considerable differences in species composition between the young stand types were observed. It is concluded that the succession of mycorrhizal fungi is not primarily influenced by ageing of the trees, but rather by changes in the soil. The results were compared with data on changes in the occurrence of fruiting species of mycorrhizal fungi in the Netherlands during this century. It appeared that species which have declined according to these data were more frequent in the young plots than in the old plots. However, these species are reported to be frequent in old stands of P. sylvestris in Estonia and Finland. It is argued that this difference is related to the high nitrogen deposition in the Netherlands.     

Finite element analysis of different loading conditions for implant-supported overdentures supported by conventional or mini implants

The effect of implants’ number on overdenture stability and stress distribution in edentulous mandible, implants and overdenture was numerically investigated for implant-supported overdentures. Three models were constructed. Overdentures were connected to implants by means of ball head abutments and rubber ring. In model 1, the overdenture was retained by two conventional implants; in model 2, by four conventional implants; and in model 3, by five mini implants. The overdenture was subjected to a symmetrical load at an angle of 20 degrees to the overdenture at the canine regions and vertically at the first molars. Four different loading conditions with two total forces (120, 300 N) were considered for the numerical analysis. The overdenture displacement was about 2.2 times higher when five mini implants were used rather than four conventional implants. The lowest stress in bone bed was observed with four conventional implants. Stresses in bone were reduced by 61% in model 2 and by 6% in model 3 in comparison to model 1. The highest stress was observed with five mini implants. Stresses in implants were reduced by 76% in model 2 and 89% increased in model 3 compared to model 1. The highest implant displacement was observed with five mini implants. Implant displacements were reduced by 29% in model 2, and increased by 273% in model 3 compared to model 1. Conventional implants proved better stability for overdenture than mini implants. Regardless the type and number of implants, the stress within the bone and implants are below the critical limits.