Crystal structure of pyruvate dehydrogenase phosphatase 1 and its functional implications

Pyruvate dehydrogenase phosphatase 1 (PDP1) catalyzes dephosphorylation of pyruvate dehydrogenase (E1) in the mammalian pyruvate dehydrogenase complex (PDC), whose activity is regulated by the phosphorylation-dephosphorylation cycle by the corresponding protein kinases (PDHKs) and phosphatases. The activity of PDP1 is greatly enhanced through Ca2+ -dependent binding of the catalytic subunit (PDP1c) to the L2 (inner lipoyl) domain of dihydrolipoyl acetyltransferase (E2), which is also integrated in PDC. Here, we report the crystal structure of the rat PDP1c at 1.8 A resolution. The structure reveals that PDP1 belongs to the PPM family of protein serine/threonine phosphatases, which, in spite of a low level of sequence identity, share the structural core consisting of the central beta-sandwich flanked on both sides by loops and alpha-helices. Consistent with the previous studies, two well-fixed magnesium ions are coordinated by five active site residues and five water molecules in the PDP1c catalytic center. Structural analysis indicates that, while the central portion of the PDP1c molecule is highly conserved among the members of the PPM protein family, a number of structural insertions and deletions located at the periphery of PDP1c likely define its functional specificity towards the PDC. One notable feature of PDP1c is a long insertion (residues 98-151) forming a unique hydrophobic pocket on the surface that likely accommodates the lipoyl moiety of the E2 domain in a fashion similar to that of PDHKs. The cavity, however, appears more open than in PDHK, suggesting that its closure may be required to achieve tight, specific binding of the lipoic acid. We propose a mechanism in which the closure of the lipoic acid binding site is triggered by the formation of the intermolecular (PDP1c/L2) Ca2+ binding site in a manner reminiscent of the Ca2+ -induced closure of the regulatory domain of troponin C.     

Crystal structure of tryptophanyl-tRNA synthetase complexed with adenosine-5' tetraphosphate: evidence for distributed use of catalytic binding energy in amino acid activation by class I aminoacyl-tRNA synthetases

Tryptophanyl-tRNA synthetase (TrpRS) is a functionally dimeric ligase, which specifically couples hydrolysis of ATP to AMP and pyrophosphate to the formation of an ester bond between tryptophan and the cognate tRNA. TrpRS from Bacillus stearothermophilus binds the ATP analogue, adenosine-5' tetraphosphate (AQP) competitively with ATP during pyrophosphate exchange. Estimates of binding affinity from this competitive inhibition and from isothermal titration calorimetry show that AQP binds 200 times more tightly than ATP both under conditions of induced-fit, where binding is coupled to an unfavorable conformational change, and under exchange conditions, where there is no conformational change. These binding data provide an indirect experimental measurement of +3.0 kcal/mol for the conformational free energy change associated with induced-fit assembly of the active site. Thermodynamic parameters derived from the calorimetry reveal very modest enthalpic changes, consistent with binding driven largely by a favorable entropy change. The 2.5 A structure of the TrpRS:AQP complex, determined de novo by X-ray crystallography, resembles that of the previously described, pre-transition state TrpRS:ATP complexes. The anticodon-binding domain untwists relative to the Rossmann-fold domain by 20% of the way toward the orientation observed for the Products complex. An unexpected tetraphosphate conformation allows the gamma and deltad phosphate groups to occupy positions equivalent to those occupied by the beta and gamma phosphates of ATP. The beta-phosphate effects a 1.11 A extension that relocates the alpha-phosphate toward the tryptophan carboxylate while the PPi mimic moves deeper into the KMSKS loop. This configuration improves interactions between enzyme and nucleotide significantly and uniformly in the adenosine and PPi binding subsites. A new hydrogen bond forms between S194 from the class I KMSKS signature sequence and the PPi mimic. These complementary thermodynamic and structural data are all consistent with the conclusion that the tetraphosphate mimics a transition-state in which the KMSKS loop develops increasingly tight bonds to the PPi leaving group, weakening linkage to the Palpha as it is relocated by an energetically favorable domain movement. Consistent with extensive mutational data on Tyrosyl-tRNA synthetase, this aspect of the mechanism develops high transition-state affinity for the adenosine and pyrophosphate moieties, which move significantly, relative to one another, during the catalytic step.     

The Role of Climate in Settlement and Landscape Change in the North Atlantic Islands: An Assessment of Cumulative Deviations in High-Resolution Proxy Climate Records

In order to assess possible contributions of climate change to the human ecology of the North Atlantic islands we evaluate the utility of cumulative deviations from the mean, calculated for the Greenland ice core storm frequency proxy (GISP2 Na⁺) and sea ice proxy (GISP2 chloride excess). Our aim is to identify episodes of unpredictable change in the context of long-term trends of cultural and environmental development. Key changes are identified in the proxy climate records in 975 and 980 ad, 1025 and 1040 ad, 1180 ad, 1425 and 1450 ad, and 1520 and 1525 ad. Some of these changes are consistent with those inferred from new studies of the palaeoecological record of the Faroes. This indicates that the cumulative deviation measure could give greatest prominence to the most important climate changes affecting landscapes and settlement (such as the changes of 1425 and 1450 ad and their immediate aftermath), rather than extreme events, such as great single storms.     

An improved method for the analysis of Cryptosporidium parvum oocysts by matrix-assisted laser desorption/ionization time of flight mass spectrometry

Cryptosporidium parvum oocysts were analyzed using matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). Sample preparation proved to be a crucial step in the acquisition of acceptable mass spectra. Oocysts of C. parvum and the matrix were mixed and held for at least 45 min to produce reproducible, representative mass spectra. Sporozoites were also excysted from oocysts, purified, and analyzed using MALDI-TOF MS. The mass spectra of the intact oocysts contained many of the same peaks found in the mass spectra of the sporozoites, suggesting that during analysis, the internal constituents, not just the oocyst wall, are ablated by the laser.     

Characterization of mesophilic bacilli in faeces of feedlot cattle

AIMS: To determine the identity and composition of mesophilic Bacillus spp. in faeces sampled from feedlot cattle. METHODS AND RESULTS: Faecal samples from 10 feedlot cattle were analysed. The total aerobic spore count increased from 4.6 x 10(4) CFU g(-1) (before feedlotting, day 0) to 1.6 x 10(6) CFU g(-1) (feedlot for day 76). A total of 150 randomly selected spore isolates (60 each from days 0 and 76 cattle, 30 from feed) were speciated using a Bacillus group-specific PCR-amplified ribosomal DNA restriction analysis technique (Wu et al. 2006). At day 0, Bacillus subtilis and Bacillus cereus predominated with a prevalence of 58.3% and 26.7%, respectively, whereas three species, B. subtilis (50.0%), Bacillus licheniformis (27.6%) and Bacillus clausii (20.0%) predominated in day 76 faecal samples. Of these, only the first two species were present in feed samples at a frequency of 70% and 30% respectively. All B. cereus isolates on day 0, possessed at least one of three enterotoxin genes (nheA, nheB and nheC) but these were completely eliminated after a period of feedlotting. All isolates of B. licheniformis were genotypically heterogeneous according to pulsed-field gel electrophoresis analysis. CONCLUSIONS: Cattle faeces contain large numbers of Bacillus spores representing different mesophilic species. Stable faecal populations of particular Bacillus spp. mimicking those found in feed, were subsequently established by feedlotting. SIGNIFICANCE AND IMPACT OF THE STUDY: The results obtained and methods used in this study will help to investigate the indigenous Bacillus composition in the gastrointestinal tract of cattle and will further guide the administration of Bacillus probiotics.     

Intralaboratory validation according to the EN ISO 16 140 Standard of the Vidas SET2 detection kit for use in official controls of staphylococcal enterotoxins in milk products

AIM: Immunological tools used to detect staphylococcal enterotoxins (SEs) in foods are numerous. The aim of this study was to evaluate, on naturally contaminated milk product samples, the performance of the Vidas SET2, in comparison to the Transia plate SET. METHODS AND RESULTS: The Vidas SET2 was compared with the Transia plate SET on supernatants of Staphylococcus aureus isolates and on naturally contaminated milk products. It is noteworthy that when using IgG rabbit treatment, both kits can be considered as equivalent to detect enterotoxins in naturally contaminated milk products. CONCLUSIONS: This study demonstrated that the Vidas SET2 performance is similar to that of Transia plate SET kit, when a rabbit IgG treatment step is used before detection step. This additional treatment significantly decreased, from 42% to 8%, the rate of positive deviations observed using the Transia plate SET detection kit. SIGNIFICANCE AND IMPACT OF THE STUDY: The Vidas SET2 was clearly found as more specific, when no preliminary rabbit IgG treatment was used, and which results in a better workflow when a large number of samples have to be analysed within a few days. Considering the results obtained, the Vidas SET2 detection kit can be used to assess the safety of milk products for SEs.     

Evaluation of rayon swab surface sample collection method for Bacillus spores from nonporous surfaces

AIM: To evaluate US Centers for Disease Control and Prevention recommended swab surface sample collection method for recovery efficiency and limit of detection for powdered Bacillus spores from nonporous surfaces. METHODS AND RESULTS: Stainless steel and painted wallboard surface coupons were seeded with dry aerosolized Bacillus atrophaeus spores and surface concentrations determined. The observed mean rayon swab recovery efficiency from stainless steel was 0.41 with a standard deviation (SD) of +/-0.17 and for painted wallboard was 0.41 with an SD of +/-0.23. Evaluation of a sonication extraction method for the rayon swabs produced a mean extraction efficiency of 0.76 with an SD of +/-0.12. Swab recovery quantitative limits of detection were estimated at 25 colony forming units (CFU) per sample area for both stainless steel and painted wallboard. CONCLUSIONS: The swab sample collection method may be appropriate for small area sampling (10 -25 cm2) with a high agent concentration, but has limited value for large surface areas with a low agent concentration. The results of this study provide information necessary for the interpretation of swab environmental sample collection data, that is, positive swab samples are indicative of high surface concentrations and may imply a potential for exposure, whereas negative swab samples do not assure that organisms are absent from the surfaces sampled and may not assure the absence of the potential for exposure. SIGNIFICANCE AND IMPACT OF THE STUDY: It is critical from a public health perspective that the information obtained is accurate and reproducible. The consequence of an inappropriate public health response founded on information gathered using an ineffective or unreliable sample collection method has the potential for undesired social and economic impact.     

A Statistical Approach for Estimation of Process Flow Data from Production of Chemicals of Fossil Origin (6 pp)

Goal, Scope and Background The life cycles of many products including textiles contain chemicals for which process flow data are not known or are too time consuming to collect. Although each chemical may not contribute significantly to the LCA results of the product, which might justify excluding them, but together their contribution could be significant. Similarly, rough estimates of the process flows for the production of a single chemical may be very uncertain and considered meaningless, while the estimates of the cumulative data of process flows for several chemicals may be less uncertain and be a meaningful contribution to the quality of the LCA results. There are methods for estimation of process flows for different types of products, with varying demands regarding input data and time and with varying accuracy of the results. This work contributes to the available methods, focusing on simple estimations for production of chemical substances. The goal was to create a fast method for estimation of emissions, resource and energy flows (process flows) for the production of chemicals, based on easily available data on the properties of the chemicals. The process flows investigated were limited to those normally associated with process industries and contributing most to depletion of resources, to global warming, acidification, eutrophication and photochemical ozone production, i.e. use of energy, crude oil, coal, natural gas, uranium in ore and emissions of CO2, SOx, NOx, NMVOC, methane, BOD, COD and total N. Toxic substances were excluded, since toxic emissions are substance specific and cannot be included in a generalization. Method Available data for the process flows for the production of chemicals of mainly fossil origin were correlated to properties of chemicals such as amount of carbon in the molecule, heat of formation and average number of chemical reaction steps in the production. The production procedures were found in readily available literature. Up to about six reaction steps were evaluated in the correlation study. The variations in the process flows among the chemicals studied were calculated. Results and Discussion There were weak correlations between average number of chemical reaction steps in the production and energy use, COD measured in water emissions, and SOx and NOx emissions to air. For the remaining properties of chemicals and process flows, there were only weak correlations for share of double bonding in the molecule if only molecules containing double bondings were included. Conclusions The precision in estimation of the process flows increases non-significantly when adding information on the number of reaction steps or share of double bonding for chemicals containing double bonding is added. Recommendations and Outlook It seems reasonable to start with a simple grouping method to estimate the process flows for the production of a chemical of fossil origin. Further investigations might investigate whether there is a correlation between process flows and the costs of chemicals, and further study the correlations between process flows and share of double bonding for chemicals containing double bondings.     

Discovering Candidate Chromosomal Regions Linked to Kernel Size-Related Traits via QTL Mapping and Bulked Sample Analysis in Maize

Kernel size-related traits, including kernel length, kernel width, and kernel thickness, are critical components in determining yield and kernel quality in maize (Zea mays L.). Dissecting the phenotypic characteristics of these traits, and discovering the candidate chromosomal regions for these traits, are of potential importance for maize yield and quality improvement. In this study, a total of 139 F2:3 family lines derived from EHel and B73, a distinct line with extremely low ear height (EHel), was used for phenotyping and QTL mapping of three kernel size-related traits, including 10-kernel length (KL), 10-kernel width (KWid), and 10-kernel thickness (KT). The results showed that only one QTL for KWid, i.e., qKWid9 on Chr9, with a phenotypic variation explained (PVE) of 13.4% was detected between SNPs of AX-86298371 and AX-86298372, while no QTLs were detected for KL and KT across all 10 chromosomes. Four bulked groups of family lines, i.e., Groups I to IV, were constructed with F2:3 family lines according to the phenotypic comparisons of KWid between EHel and B73. Among these four groups, Group I possessed a significantly lower KWid than EHel (P = 0.0455), Group II was similar to EHel (P = 0.34), while both Group III and Group IV were statistically higher than EHel (P < 0.05). Besides, except Group IV exhibited a similar KWid to B73 (P = 0.11), KWid of Groups I to III were statistically lower than B73 (P < 0.00). By comparing the bulked genotypes of the four groups to EHel and B73, a stable chromosomal region on Chr9 between SNPs of AX-86298372 to AX-86263154, entirely covered by qKWid9, was identified to link KWid with the positive allele of increasing phenotypic effect to KWid from B73, similar to that of qKWid9. A large amount of enzyme activity and macromolecule binding-related genes were annotated within this chromosomal region, suggesting qKWid9 as a potential QTL for KWid in maize.