Selection and proliferation of rapid growing cell lines from embryo derived cell cultures of yew tree (Taxus cuspidata Sieb. et Zucc)

Calli were induced from 300,000 embryos isolated from immature to mature stage of seeds collected on late September from 14 elite trees. When the embryos were cultured onto plastic Petri-dish containing 20 mL of modified B5 basal medium supplemented with 3% (w/v) sucrose, 500 mg/L casein hydrolysate, 250 mg/L myo-inositol, 0.5% (w/v) polyvinyl polypyrrolidon (PVPP), 2×MS vitamins, 0.5 mg/L gibberellic acid, and 10 mg/L 2,4-D after 2 weeks of culture, yellowish-white calli were immediately formed on the surfaces of embryos, and subcultured for 4 weeks in same culture medium. Because most of calli maintained for more than 3 months were revealed differences in their colors, surface texture, and growth rate, visual selection was made for first round screening. When the size of visually selected calli larger than 19 mm in their diameter were inoculated, persistent proliferation was observed. Among the plating methods tested for the selection of rapid growing cell lines at single cell and/or small cell aggregate level, 2-layer spread plating revealed as the best for single cell cloning. To enhance cell growth and maintain high rate of viability for long-term culture of yew cells in bioreactor, final cell volume less than 50% in SCV seemed to be the best. Time course study revealed that 30% of inoculum density was suitable for fed batch culture. Among the tested conditional media, the rate of 1∶2 (old medium: fresh medium) was recorded at the best for cell growth.     

Cultivation of Aspergillus niger in a pilot plant external-loop air-lift bioreactor

Abstract: Changes of the main hydrodynamic and oxygen transfer parameters during Aspergillus niger cultivation in an external-loop air-lift bioreactor of 200 dm³ operating capacity were investigated. The final average concentrations of biomass and citric acid obtained in batch fermentations were about 17 g 1^-1 and 90 g 1^-1, respectively. Significant influence of the increasing biomass concentration on the rheological properties of the broth and operating parameters was found. Volumetric oxygen transfer coefficient. k ^L a , was found to be dependent on the apparent viscosity of the broth with an exponent of -0.984.     

Design of a bubble-swawm bioreactor for animal cell culture

A stationary bubble-swarm has been used to aerate a mammalian cell culture bioreactor with an extremely low gas flow rate. Prolonging the residence time of the gas bubbles within the medium improved the efficiency of the gas transfer into the liquid phase and suppressed foam formation. An appropriate field of speed gradients prevented the bubbles from rising to the surface. This aeration method achieves an almost 90% transfer of oxygen supplied by the bubbles. Consequently, it is able to supply cells with oxygen even at high cell densities, while sparging with a gas flow of only 0.22·10^–3–1.45·10^–3 vvm (30–200 ml/h).The reactor design, the oxygen transfer rates and the high efficiency of the system are presented. Two repeated batch cultures of a rat-mouse hybridoma cell line are compared with a surface-aerated spinner culture. The used cell culture medium was serum-free, either with or without BSA and did not contain surfactants or other cell protecting agents. One batch is discussed in detail for oxygen supply, amino acid consumption and specific antibody production.     

Cultivation of mammalian cells as aggregates in bioreactors: effect of calcium concentration of spatial distribution of viability

Recombinant human kidney epithelial 293 cells were cultivated as aggregates in suspension. The concentration calcium ion, in the range of 100 muM to 1mM, affected the rate of aggregate formation. During the course of cultivation the size distribution of aggregates shifted and the fraction of larger aggregates increased. This effect was more profound in cultures with a high calcium concentration. Scanning and transmission microscopic examination of the aggregates revealed that cell packing was greater in the high calcium cultures and that ultrastructural integrity was retained in aggregates from both low and high calcium cultures. Confocal microscopy was applied to examine the viability of cells in the interior of the aggregates. High viability was observed in the aggregates obtained from exponentially growing cultures. Aggregates from the high calcium culture in the stationary phase exhibited lower viability in the interior. With its ease of retention in a perfusion bioreactor, aggregate cultures offer an alternative choice for large-scale operation. (c) 1993 John Wiley & Sons, Inc.     

Bioreactors for surface-immobilized cells

Surface immobilization of plant cells avoids the problem of hydrodynamic or shear stress, which tends to be characteristic of suspended cells cultured in typical, mechanically agitated bioreactor systems. Surface immobilization also promotes the natural tendency for plant cells to aggregate, which may improve the synthesis and accumulation of secondary metabolites. In addition, exchange of medium is made simple in surface-immobilized systems, and extracellular secondary products are easily recovered on a continuous basis. However, problems related to regulation of the thickness of the immobilized cell layer, maintenance of the biomass in a productive condition, and vacuolar retention of secondary products have yet to be resolved satisfactorily. This review focusses on two surface-immobilization technologies, differing primarily in the nature and the configuration of the inert support. Prototypes of these designs have been applied to a variety of plant cell systems at bioreactor volumes up to 20 litres. Results obtained with several alternative technologies are also summarized.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - SIPCB surface-immobilized plant cell bioreactor National Research Council of Canada publication no. 38460     

Recent advances in plant cell cultures in bioreactors

Two key issues in the application of plant-cell-culture technology to the production of valuable secondary metabolites are reviewed: the selection of cell lines with suitable genetic, biochemical and physiological characteristics; and the optimization of bioreactor environments. Although great progress has been made in recent years in the design, selection and optimization of bioreactor hardware, optimization of environmental factors such as medium components, light irradiation and O₂ supply needs detailed investigations for each case. With a better understanding of plant cell metabolism and physiology, further developments in cultivation processes, such as process integration and on-line monitoring and control, can be expected in the near future.J.-J. Zhong and J.-T. Yu are with the Research Institute of Biochemical Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China T. Yoshida is with the International Center of Cooperative Research in Biotechnology (ICBiotech), Faculty of Engineering, Osaka University, Suita, Osaka 565, Japan.     

抗FLAG标签抗体在植物中的高效表达

植物生物反应器是一种新兴的重组蛋白表达系统,是分子农业的核心内容之一。本研究在本氏烟草(Nicotiana benthamiana)中表达了抗八肽(DYKDDDDK, FLAG)标签抗体,并对其进行纯化与鉴定。通过多次免疫小鼠获得高效价抗FLAG抗体并测出其编码序列,然后亚克隆至植物DNA病毒表达载体,最后通过农杆菌介导转染烟草叶片。经Western blotting检测了转染后2−9 d抗体的表达情况：3 d后FLAG抗体开始在烟草叶片中表达,5 d后表达量达到峰值,每千克鲜叶估计可表达66 mg FLAG抗体。抗体经过分离纯化后浓缩为1 mg/mL,按1:10 000稀释仍可识别1 ng/mL的抗原,表明植物生产的FLAG抗体具有高亲和力。植物生物反应器可用于生产高亲和力抗体,并具有简易、成本低和生产周期短等特点,具有很高的应用价值。     

Scale-up of naringinase production process based on the constant oxygen transfer rate for a novel strain of Bacillus methylotrophicus

Naringinase bioprocess based on Bacillus methylotrophicus was successfully scaled up based on constant oxygen transfer rate (OTR) as the scale-up criterion from 5-L bioreactor to 20-L bioreactor. OTR was measured in 5 and 20-L bioreactor under various operating conditions using dynamic method. The operating conditions, where complete dispersion was observed were identified. The highest OTR of 0.035 and 0.04?mMol/L/s was observed in 5 and 20-L bioreactor, respectively. Critical dissolved oxygen concentration of novel isolated strain B. methylotrophicus was found to be 20% of oxygen saturation in optimized medium. The B. methylotrophicus cells grown on sucrose had maximum oxygen uptake rate of 0.14?mMol/L/s in optimized growth medium. The cells produced the maximum naringinase activity of 751 and 778?U/L at 34?hr in 5 and 20-L bioreactors, respectively. The maximum specific growth rate of about 0.178/hr was observed at both the scales of operations. The maximum naringinase yield of 160 and 164?U/g biomass was observed in 5 and 20-L bioreactors, respectively. The growth and production profiles at both scales were similar indicating successful scale-up strategy for B. methylotrophicus culture.     

Development and ossification of the feeding apparatus in the larvae of two co‐occurring species of kob (Sciaenidae), Argyrosomus japonicus and Argyrosomus inodorus,in South Africa

The teeth of the oral jaws of two sympatric species of Argyrosomus, Argyrosomus japonicus and Argyrosomus inodorus, found along the South African coast developed first on the premaxilla and then on the dentary of the lower jaw. Teeth were observed on the premaxilla of A. inodorus [head length (L_H) = 1·0 mm; notochord length (L_N) = 2·7 mm] at a smaller size than in A. japonicus (L_H = 1·2 mm; L_N = 4·7 mm). The ventral elements of the gill arches (hypo‐ and basibranchials) were not ossified by the end of preflexion. The fifth ceratobranchial began ossifying and possessed pharyngeal teeth by 1·2 mm L_H (L_N = 4·7 mm) in A. japonicus and 1·1 mm L_H (L_N = 3·2 mm) in A. inodorus. To complement the osteological data, stomach contents were also analysed as a proxy for feeding apparatus functionality. Prey were first present in the stomach of A. japonicus at 1·2 mm L_H (L_N = 4·7 mm) and only 22% of the stomachs contained no prey suggesting that A. japonicus is already actively foraging by preflexion. In comparison, 83% of the stomachs of A. inodorus contained no prey and a single prey item was present in the largest examined specimen (L_H = 1·6 mm; L_N = 5·4 mm). Elements of the feeding apparatus begin to ossify early during ontogeny. While the overall pattern of ossification is similar between the two species, A. japonicus may be able to begin feeding at smaller head lengths relative to A. inodorus in their nursery habitats.     

Programmable mechanical stimulation influences tendon homeostasis in a bioreactor system

Identification of functional programmable mechanical stimulation (PMS) on tendon not only provides the insight of the tendon homeostasis under physical/pathological condition, but also guides a better engineering strategy for tendon regeneration. The aims of the study are to design a bioreactor system with PMS to mimic the in vivo loading conditions, and to define the impact of different cyclic tensile strain on tendon. Rabbit Achilles tendons were loaded in the bioreactor with/without cyclic tensile loading (0.25 Hz for 8 h/day, 0–9% for 6 days). Tendons without loading lost its structure integrity as evidenced by disorientated collagen fiber, increased type III collagen expression, and increased cell apoptosis. Tendons with 3% of cyclic tensile loading had moderate matrix deterioration and elevated expression levels of MMP‐1, 3, and 12, whilst exceeded loading regime of 9% caused massive rupture of collagen bundle. However, 6% of cyclic tensile strain was able to maintain the structural integrity and cellular function. Our data indicated that an optimal PMS is required to maintain the tendon homeostasis and there is only a narrow range of tensile strain that can induce the anabolic action. The clinical impact of this study is that optimized eccentric training program is needed to achieve maximum beneficial effects on chronic tendinopathy management. Biotechnol. Bioeng. 2013; 110: 1495–1507. © 2012 Wiley Periodicals, Inc.