水稻蒸煮品质相关QTL定位及候选基因分析

挖掘与稻米蒸煮品质相关的数量性状基因座(quantitative trait locus, QTL)，分析候选基因，并通过遗传育种手段改良稻米蒸煮品质相关性状，可有效提升稻米的口感。以籼稻华占(Huazhan, HZ)、粳稻热研2号(Nekken2)及由其构建的120个重组自交系(recombinant inbred lines, RILs)群体为实验材料，测定成熟期稻米的糊化温度(gelatinization temperature, GT)、胶稠度(gel consistency, GC)和直链淀粉含量(amylose content, AC)。结合高密度分子遗传图谱进行QTL定位，共检测到26个与稻米蒸煮品质相关的QTLs (糊化温度相关位点1个、胶稠度相关位点13个、直链淀粉含量相关位点12个)，其中最高奇数的可能性(likelihood of odd, LOD)值达30.24。通过实时荧光定量PCR (quantitative real-time polymerase chain reaction, qRT-PCR)分析定位区间内候选基因的表达量，发现6个基因在双亲间的表达量差异显著，推测LOC_Os04g20270和LOC_Os11g40100的高表达可能会极大地提高稻米的胶稠度，而LOC_Os01g04920和LOC_Os02g17500的高表达以及LOC_Os03g02650和LOC_Os05g25840的低表达有助于降低直链淀粉含量。这些结果为培育优质水稻新品种奠定了分子基础，并为揭示稻米蒸煮品质的分子调控机制提供了重要的遗传资源。     

不同生长环境下水稻穗伸出度的QTL分析

以十和田/昆明小白谷225个F14家系为作图群体,在云南省弥勒县(正常生长环境)、嵩明县(自然低温胁迫环境)、丽江市(自然低温胁迫环境)等3个试点不同年份共5种不同生长环境下进行了水稻主穗和分蘖穗穗伸出度的异地鉴定,并利用SSR标记对水稻穗伸出度进行了QTL分析。检测结果表明,在5种不同的生长环境下共检测到12个与水稻穗伸出度相关的QTL,分别分布于第1(2个QTLs)、2、4、6(3个QTLs)、7(3个QTLs)、9(2个QTLs)号染色体,对表型的贡献率为3.72%~22.17%。其中与主穗穗伸出度相关的QTL共11个,与分蘖穗穗伸出度相关的QTL共7个,其中6个在主穗和分蘖穗上均检测到。在与主穗穗伸出度相关的11个QTL中,q PE-7-1在4种环境下均被检测到,解释的表型变异为9.49%~22.17%;q PE-1-1、q PE-1-2、q PE-6-1和q PE-9-2 4个QTL在2种环境下均被检测到。在与分蘖穗穗伸出度相关的7个QTL中,q PE-1-2、q PE-7-1和q PE-6-1 3个QTL在2种环境中均被检测到,解释的表型变异率分别为4.35%~12.64%、13.22%~20.89%和11.49%~15.73%。     

基于DUS测试的上海粳稻地方品种遗传多样性分析

利用水稻DUS测试指南(2012版)中的38个水稻标准品种和52个基本测试性状对上海地区的172个粳稻地方品种进行遗传多样性分析,并与14个上海地区选育的申请品种保护的粳稻品种作比较。结果表明:地方品种表型性状共检测到176个等位变异,平均每个测试性状检测到3.6667个,变幅介于1~8个。Shannon's多样性指数(H')平均值为0.6834,变幅介于0~1.9327,77.08%的性状存在3个及以上的等位变异;地方品种的等位变异数、每个性状的等位变异数及其变异幅度、多样性指数平均值等均大于现代育成品种,在外观形态上,地方品种的遗传多样性比现代育成品种更丰富。利用UPGMA法进行聚类分析发现在相似系数为0.53时,可将186个粳稻品种分为3个类(亚)群,现代育成品种单独组成一个亚群;而主坐标分析将186个粳稻品种明显的分为地方品种和现代育成品种两大区。地方品种具有丰富的多样性,与现代育成品种具有明显的形态差异,可为今后粳稻育成品种的改良提供更多的形态基础。     

Mutation of Oryza sativa CORONATINE INSENSITIVE 1b (OsCOI1b) delays leaf senescence

Jasmonic acid (JA) functions in plant development, including senescence and immunity. Arabidopsis thaliana CORONATINE INSENSITIVE 1 encodes a JA receptor and functions in the JA‐responsive signaling pathway. The Arabidopsis genome harbors a single COI gene, but the rice (Oryza sativa) genome harbors three COI homologs, OsCOI1a, OsCOI1b, and OsCOI2. Thus, it remains unclear whether each OsCOI has distinct, additive, synergistic, or redundant functions in development. Here, we use the oscoi1b‐1 knockout mutants to show that OsCOI1b mainly affects leaf senescence under senescence‐promoting conditions. oscoi1b‐1 mutants stayed green during dark‐induced and natural senescence, with substantial retention of chlorophylls and photosynthetic capacity. Furthermore, several senescence‐associated genes were downregulated in oscoi1b‐1 mutants, including homologs of Arabidopsis thaliana ETHYLENE INSENSITIVE 3 and ORESARA 1, important regulators of leaf senescence. These results suggest that crosstalk between JA signaling and ethylene signaling affects leaf senescence. The Arabidopsis coi1‐1 plants containing 35S:OsCOI1a or 35S:OsCOI1b rescued the delayed leaf senescence during dark incubation, suggesting that both OsCOI1a and OsCOI1b are required for promoting leaf senescence in rice. oscoi1b‐1 mutants showed significant decreases in spikelet fertility and grain weight, leading to severe reduction of grain yield, indicating that OsCOI1‐mediated JA signaling affects spikelet fertility and grain filling.     

Identification and characterization of Mini1, a gene regulating rice shoot development

The aerial parts of higher plants are generated from the shoot apical meristem(SAM). In this study, we isolated a small rice(Oryza sativa L.) mutant that showed premature termination of shoot development and was named mini rice 1(mini1). The mutant was first isolated from a japonica cultivar Zhonghua11(ZH11) subjected to ethyl methanesulfonate(EMS)treatment. With bulked segregant analysis(BSA) and map-based cloning method, Mini1 gene was finally fine-mapped to an interval of 48.6 kb on chromosome 9. Sequence analyses revealed a single base substitution from G to A was found in the region, which resulted in an amino acid change from Gly to Asp.The candidate gene Os09g0363900 was predicted to encode a putative adhesion of calyx edges protein ACE(putative HOTHEAD precursor) and genetic complementation experiment confirmed the identity of Mini1. Os09g0363900 contains glucose-methanol-choline(GMC) oxidoreductase and NAD(P)-binding Rossmann-like domain, and exhibits high similarity to Arabidopsis HOTHEAD(HTH). Expression analysis indicated Mini1 was highly expressed in young shoots but lowly in roots and the expression level of most genes involved in auxin biosynthesis and signal transduction were reduced in mutant.We conclude that Mini1 plays an important role in maintaining SAM activity and promoting shoot development in rice.     

Integrating flood depth and plant resistance with chlorantraniliprole seed treatments for management of rice water weevil,Lissorhoptrus oryzophilus (Coleoptera: Curculionidae)

Chlorantraniliprole seed treatments in rice provide effective suppression of rice water weevil populations in the United States; however, heavy reliance on prophylactic insecticide treatments as a sole strategy could destabilize management programs for this insect. The present research evaluated the compatibility of seed treatments with two other potential management tactics—plant resistance and shallow flooding–by conducting two split‐plot experiments in 2009 and 2011. In both experiments, no substantial antagonism was found among the 3 different tactics. Statistical interactions in these experiments arose from the strong and persistent effects of chlorantraniliprole on larval densities rather than incompatibility of tactics. In 2009, weevil densities differed among varieties and were significantly lower on the cultivar “Jefferson.” In 2011, weevil densities were reduced significantly in shallow‐flooded plots compared to deep‐flooded plots. Significant reductions in weevil numbers by chlorantraniliprole seed treatments, even at application rates 5 fold lower than commercially recommended rates, demonstrated the potential to reduce application rates of this highly potent larvicide. These latter results suggest that future studies on the relationship between chlorantraniliprole seed treatment rate and weevil fitness are warranted.     

某坦克部队外训期间的膳食营养调查

目的:了解坦克部队官兵在野外驻训期间的膳食营养状况,为指导合理膳食提供参考依据。方法:膳食调查采用称重法,能量消耗采用生活观察法,体格检查指标包括体重和皮褶厚度。结果:每日人均禽肉、鱼虾、蔬菜等摄入水平未达到"军人食物定量"标准,而植物油摄入量则超过军标要求;VB1、VC、铁、锌、硒、碘等摄入量未达到"军人营养素供给量"标准要求;三大产能营养素供能比例不合理,脂肪摄入偏高,碳水化合物偏低;多数官兵野外驻训7 d后体重和皮褶厚度降低。结论:该部队在野外驻训期间膳食结构不够合理,部分营养素摄入量未达到军标要求,应调整膳食结构,改善官兵的营养状况。     

Growth and Cadmium Phytoextraction by Swiss Chard,Maize, Rice,Noccaea caerulescens,and Alyssum murale in pH Adjusted Biosolids Amended Soils

Past applications of biosolids to soils at some locations added higher Cd levels than presently permitted. Cadmium phytoextraction would alleviate current land use constraints. Unamended farm soil, and biosolids amended farm and mine soils were obtained from a Fulton Co., IL biosolids management facility. Soils contained 0.16, 22.8, 45.3 mg Cd kg^–1 and 43.1, 482, 812 mg Zn kg^–1 respectively with initial pH 6.0, 6.1, 6.4. In greenhouse studies, Swiss chard (Beta vulgaris var. cicla), a Cd-accumulator maize (inbred B37 Zea mays) and a southern France Cd-hyperaccumulator genotype of Noccaea caerulescens were tested for Cd accumulation and phytoextraction. Soil pH was adjusted from ～5.5–7.0. Additionally 100 rice (Oryza sativa) genotypes and the Ni-hyperaccumulator Alyssum murale were screened for potential phytoextraction use.

Chard suffered phytotoxicity at low pH and accumulated up to 90 mg Cd kg^–1 on the biosolids amended mine soil. The maize inbred accumulated up to 45 mg Cd kg^–1 with only mild phytotoxicity symptoms during early growth at pH > 6.0. N. caerulescens did not exhibit phytotoxicity symptoms at any pH, and accumulated up to 235 mg Cd kg^–1 in 3 months. Reharvested N. caerulescens accumulated up to 900 mg Cd kg^–1 after 10 months. Neither Alyssum nor 90% of rice genotypes survived acceptably.

Both N. caerulescens and B37 maize show promise for Cd phytoextraction in IL and require field evaluation; both plants could be utilized for nearly continuous Cd removal. Other maize inbreds may offer higher Cd phytoextraction at lower pH, and mono-cross hybrids higher shoot biomass yields. Further, maize grown only for biomass Cd maximum removal could be double-cropped.     

A Quantitative Measure of Field Illumination

In this paper, we describe a statistically based algorithm to quantify the uniformity of illumination in an optical light microscopy imaging system that outputs a single quality factor (QF) score. The importance of homogeneous field illumination in quantitative light microscopy is well understood and often checked. However, there is currently no standard automatic quantitative measure of the uniformity of the field illumination. Images from 89 different laser-scanning confocal microscopes (LSCMs), which were collected as part of an international study on microscope quality assessment, were used as a “training” set to build the algorithm. To validate the algorithm and verify its robustness, images from 33 additional microscopes, including LSCM and wide-field (WF) microscopes, were used. The statistical paradigm used for developing the quality scoring scale was a regression approach to supervised learning. Three intensity profiles across each image—2 corner-to-corner diagonals and a center horizontal—were used to generate pixel-intensity data. All of the lines passed through the center of the image. The intensity profile data then were converted into a single-field illumination QF score in the range of 0–100, with 0 having extreme variation, and therefore, essentially unusable, and 100 having no deviation, i.e., straight lines with a constant uniform intensity. Empirically, a QF ≥ 83 was determined to be the minimum acceptable value based on manufacturer acceptance tests and reasonably achievable values. This new QF is an invaluable metric to ascertain objectively and easily the uniformity of illumination quality, provide a traceable reference for monitoring field uniformity over time, and make a direct comparison among different microscopes. The QF can also be used as an indicator of system failure and the need for alignment or service of the instrument.