Identification of N- and C-terminal corticotropin peptides in the Mr 80000 form of neurophysin

The 125I-labeled Mr 80000 form of neurophysin has been purified from bovine neurohypophysi. Tryptic digests of this species were analyzed, prior to or after treatment with carboxypeptidase B, by high-pressure liquid chromatography followed by isoelectric focusing and the fragments compared with those generated by a similar treatment of reference bovine 1-39 adrenocorticotropin. The ACTH peptides 22-39 and 1-8, as well as the 1-7 derivative of the latter were identified by those two independent criteria. This provides chemical evidence supporting the hypothesis [8] that high Mr neurophysin may contain the sequence of ACTH.     

Purification of gangliosides by liquid-liquid partition chromatography

A liquid-liquid partition chromatographic technique was applied to separate amphiphilic glycolipids. A two-phase solvent system composed of n-butanol-t-butyl methyl ether-acetonitrile-water at a volume ratio of 3:1:1:5 was found to be suitable for separating the gangliosides from total lipids extracted from rat brain by liquid-liquid partition chromatographic systems, namely centrifugal partition chromatography (CPC) and high-speed counter-current chromatography. GM1 could be separated rapidly by using the upper phase as stationary phase for both systems. Moreover, various kinds of gangliosides (GM1, GD1a, GD1b, GT1b) could be separated individually by using the lower phase as stationary phase by CPC. The sample can be recovered without loss by these systems.     

Large scale depletion of the high-abundance proteins and analysis of middle- and low-abundance proteins in human liver proteome by multidimensional liquid chromatography

An unbiased method for large-scale depletion of high-abundance proteins and identification of middle- or low-abundance proteins by multidimensional LC (MDLC) was demonstrated in this paper. At the protein level, the MDLC system, coupling the first dimensional strong cation exchange (SCX) chromatography with the second dimensional RP-HPLC, instead of immunoaffinity technology, was used to deplete high-abundance proteins. Sixty-two fractions from SCX were separated further by RPLC. UV absorption spectra were observed to differentiate high-abundance proteins from middle- or low-abundance proteins. After the depletion of high-abundance proteins, middle- or low-abundance proteins were enriched, digested, and separated by online 2D-micro-SCX/cRPLC. The eluted peptides were deposited on the MALDI target and detected by MALDI-TOF/TOF MS. This depletion strategy was applied to the proteome of the normal human liver (NHL) provided by the China Human Liver Proteome Project (CHLPP). In total, 58 high-abundance proteins were depleted in one experiment. The strategy increases greatly the number of identified proteins and around 1213 proteins were identified, which was about 2.7 times as that of the nondepletion method.     

Case study and application of process analytical technology (PAT) towards bioprocessing: II. Use of ultra-performance liquid chromatography (UPLC) for making real-time pooling decisions for process chromatography

Process analytical technology (PAT) has been gaining a lot of momentum in the biopharmaceutical community due to the potential for continuous real-time quality assurance resulting in improved operational control and compliance. Two of the key goals that have been outlined for PAT are "variability is managed by the process" and "product quality attributes can be accurately and reliably predicted over the design space established for materials used, process parameters, manufacturing, environmental, and other conditions". Recently, we have been examining the feasibility of applying different analytical tools for designing PAT applications for bioprocessing. We have previously shown that a commercially available online high performance liquid chromatography (HPLC) system can be used for analysis that can facilitate real-time decisions for column pooling based on product quality attributes (Rathore et al., 2008). In this article we test the feasibility of using a commercially available ultra- performance liquid chromatography (UPLC) system for real-time pooling of process chromatography columns. It is demonstrated that the UPLC system offers a feasible approach and meets the requirements of a PAT application. While the application presented here is of a reversed phase assay, the approach and the hardware can be easily applied to other modes of liquid chromatography.     

Quantitation of wall teichoic acid in Staphylococcus aureus by direct measurement of monomeric units using LC-MS/MS

The emergence of methicillin-resistant Staphylococcus aureus (MRSA) has created an urgent need for new therapeutic agents capable of combating this threat. We have previously reported on the discovery of novel inhibitors targeting enzymes involved in the biosynthesis of wall teichoic acid (WTA) and demonstrated that these agents can restore β-lactam efficacy against MRSA. In those previous reports pathway engagement of inhibitors was demonstrated by reduction in WTA levels measured by polyacrylamide gel electrophoresis. To enable a more rigorous analysis of these inhibitors we sought to develop a quantitative method for measuring whole-cell reductions in WTA. Herein we describe a robust methodology for hydrolyzing polymeric WTA to the monomeric component ribitol-N-acetylglucosamine coupled with measurement by LC-MS/MS. Critical elements of the protocol were found to include the time and temperature of hydrofluoric acid-mediated hydrolysis of polymeric WTA and optimization of these parameters is fully described. Most significantly, the assay enabled accurate and reproducible measurement of depletion EC_50s for tunicamycin and representatives from the novel class of TarO inhibitors, the tarocins. The method described can readily be adapted to quantifying levels of WTA in tissue homogenates from a murine model of infection, highlighting the applicability for both in vitro and in vivo characterizations.     

Trace-Level Determination of Oxolinic Acid and Flumequine in Soil,River Bed Sediment,and River Water Using Microwave-Assisted Extraction and High-Performance Liquid Chromatography with Fluorimetric Detection

This work presents the optimization of analytical procedures for the determination of two antibiotics, oxolinic acid (OA) and flumequine (FL), in bed sediment, river water, and soil samples. Three extraction methods (microwave-assisted extraction (MAE), ultrasonication, and reflux) were tested, and the highest recoveries were obtained with MAE (94 ± 3% and 95 ± 3% for OA and FL, respectively). A solid-phase extraction (SPE) clean-up step was optimized by comparing two polymeric sorbents: Oasis HLB and Oasis MAX. The final extracts were analyzed by liquid chromatography with fluorimetric detection. Limits of detection (LOD) obtained for OA and FL in soil and sediment ranged from 0.3 to 0.5 µg kg^?1. Meanwhile, a novel SPE procedure was also implemented for OA and FL determination in river water samples. It also relied on the use of Oasis MAX, and recovery rates were in the range 90–94%; LODs were 2 ng L^?1 for both OA and FL. These methods were applied for the analysis of samples taken in the Seine River basin (France). The obtained results demonstrated the widespread occurrence of OA and FL, at ng L^?1 and µg kg^?1 levels in water and sediment/soil, respectively, and their persistence in the environment.     

Tunable luminescence and energy transfer in Ca3SiO4Cl2:Ce3+,Li+,Mn2+,Eu2+ phosphors

A series of color‐tunable Ca_{3–2x‐y‐z}SiO₄Cl₂ (CSC):xCe³⁺,xLi⁺,yMn²⁺,zEu²⁺ phosphors with low temperature phase structure was synthesized via the sol–gel method. An energy transfer process from Ce³⁺ to Mn²⁺ in CSC:0.01Ce³⁺,0.01Li⁺,yMn²⁺ (y = 0.03–0.09) and the mechanism was verified to be an electric dipole–dipole interaction. The Ce³⁺ and Mn²⁺ emission intensities were greatly enhanced by co‐doping Eu²⁺ ions into CSC:0.01Ce³⁺,0.01Li⁺,0.07Mn²⁺ phosphors due to competitive energy transfers from Eu²⁺/Ce³⁺ to Mn²⁺, and Ce³⁺ to Eu²⁺. Under 332 nm excitation, CSC:0.01Ce³⁺,0.01Li+,0.07Mn²⁺,zEu²⁺ (z = 0.0005–0.002) exhibited tunable emission colors from green to white with coexisting orange, green and violet‐blue emissions. These phosphors could have potential application in white light‐emitting diodes.     

Evaluation of several protein a resins for application to multicolumn chromatography for the rapid purification of fed‐batch bioreactors

Most of the existing production capacity is based on fed‐batch bioreactors. Thanks to the development of more efficient cell lines and the development of high‐performance culture media, cell productivity dramatically increased. In a manufacturing perspective, it is necessary to clear as quickly as possible the protein A capture step to respect the manufacturing agenda. This article describes the methodology applied for the design of a multicolumn chromatography process with the objective of purifying as quickly as possible 1,000 and 15,000 L fed‐batch bioreactors. Several recent and reference protein A resins are compared based on characteristic values obtained from breakthrough curves. The importance and relevance of resin parameters are explained, and purposely simple indicators are proposed to quickly evaluate the potential of each candidate. Based on simulation data, the optimum BioSC systems associated with each resin are then compared. The quality of the elution delivered by each resin is also compared to complete the assessment. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:941–953, 2017     

Three‐Stage Inter‐Orthorhombic Evolution and High Thermoelectric Performance in Ag‐Doped Nanolaminar SnSe Polycrystals

The ultrahigh thermoelectric performance of SnSe‐based single crystals has attracted considerable interest in their polycrystalline counterparts. However, the temperature‐dependent structural transition in SnSe‐based thermoelectric materials and its relationship with their thermoelectric performance are not fully investigated and understood. In this work, nanolaminar SnSe polycrystals are prepared and characterized in situ using neutron and synchrotron powder diffraction measurements at various temperatures. Rietveld refinement results indicate that there is a complete inter‐orthorhombic evolution from Pnma to Cmcm by a series of layer slips and stretches along the a‐ and b‐axes over a 200 K temperature range. This phase transition leads to drastic enhancement of the carrier concentration and phonon scattering above 600 K. Moreover, the unique nanolaminar structure effectively enhances the carrier mobility of SnSe. Their grain and layer boundaries further improve the phonon scattering. These favorable factors result in a high ZT of 1.0 at 773 K for pristine SnSe polycrystals. The thermoelectric performances of polycrystalline SnSe are further improved by p‐type and n‐type dopants (i.e., doped with Ag and SnCl₂, respectively), and new records of ZT are achieved in Ag_0.015Sn_0.985Se (ZT of 1.3 at 773 K) and SnSe_0.985Cl_0.015 (ZT of 1.1 at 773 K) polycrystals.     

Functional Graded Germanium–Lead Chalcogenide‐Based Thermoelectric Module for Renewable Energy Applications

High thermoelectric conversion efficiencies can be achieved by making use of materials with, as high as possible, figure of merit, ZT, values. Moreover, even higher performance is possible with appropriate geometrical optimization including the use of functionally graded materials (FGM) technology. Here, an advanced n‐type functionally graded thermoelectric material based on a phase‐separated (PbSn_0.05Te)_0.92(PbS)_0.08 matrix is reported. For assessment of the thermoelectric potential of this material, combined with the previously reported p‐type Ge_0.87Pb_0.13Te showing a remarkable dimensionless figure of merit of 2.2, a finite‐element thermoelectric model is developed. The results predict, for the investigated thermoelectric couple, a very impressive thermoelectric efficiency of 14%, which is more than 20% higher than previously reported values for operating under cold and hot junction temperatures of 50 °C and 500 °C, respectively. Validation of the model prediction is done by a thermoelectric couple fabricated according to the model's geometrical optimization conditions, showing a good agreement to the theoretically calculated results, hence approaching a higher technology readiness level.