Genetic variation of recent Alu insertions in human populations

The Alu family of intersperesed repeats is comprised of ovr 500,000 members which may be divided into discrete subfamilies based upon mutations held in common between members. Distinct subfamilies of Alu sequences have amplified within the human genome in recent evolutionary history. Several individual Alu family members have amplified so recently in human evolution that they are variable as to presence and absence at specific loci within different human populations. Here, we report on the distribution of six polymorphic Alu insetions in a survey of 563 individuals from 14 human population groups across several continents. Our results indicate that these polymorphic Alu insertions probably have an African origin and that there is a much smaller amount of genetic variation between European populations than that found between other populations groups. Present address: Department of Pathology, Stanley S. Scott Cancer Center, Louisiana State University Medical Center, 1901 Perdido St., New Orleans, LA 70112 Correspondence to: M.A. Batzer     

Engineering the lac permease for purification and crystallization

The lactose permease is being used as a model system for the rational redesign of a membrane protein with the goal of increasing the likelihood of crystallization. Various modifications to the protein have been added for the purposes of purification, stability, and potential for crystallization. The addition of six consecutive histidines at the C-terminus of the protein allows for the rapid purification by nickel-chelate chromatography, and the insertion of an entire protein domain into one of the inner cytoplasmic loops of the permease gives the resulting protein a larger hydrophilic surface area. The increase in polar surface area makes the fusion protein easier to handle and more likely to crystallize. In particular, the introduction of cytochromeb562 ofE. coli into the central hydrophilic domain of the lac permease results in a fusion protein with the transport activity of the permease and the visible absorbance spectrum of the cytochrome. The red permease is very easy to monitor through the steps of expression, purification, concentration, and crystallization.     

东方次睾吸虫电镜研究(吸虫纲:后睾科)V.雌性生殖器官

东方次睾吸虫雌性生殖器官（卵巢、输卵管、卵黄－输卵管、卵模、梅氏腺和子宫）透射电镜 观察。卵巢内有不同成熟期的生殖细胞,成熟初级卵母细胞有几个靠近核的核仁样小聚体和许多沿 质膜的皮质颗粒。首次发现并描述卵巢和输卵管接合处（卵巢壶腹）的超微结构。输卵管上皮为纤 毛状。梅氏腺仅一种类型膜状小体细胞,经有微管支持的细小管道穿过卵模将膜状小体排入卵模腔 内。在卵黄－输卵管和卵模中有精子,卵模和子宫中有受精卵、虫卵（扫描电镜）：大小 ２６. ０５× １１．４６－１３．５５μｍ,卵盖直径６．２６－６. ８９μｐ,卵壳表面布满膜状隆起。文中对卵巢和梅氏腺的超微 结构特点进行了讨论。     

Structural organization and differential expression of three stilbene synthase genes located on a 13 kb grapevine DNA fragment

A 13 kb DNA fragment was isolated from a grapevine (Vitis var. Optima) genomic library by hybridizing with elicitor-induced stilbene synthase cDNA as a probe. After fragmentation with Eco RI, subcloning and sequencing, two full-size stilbene synthase genes (Vst1 and Vst2) and the 3 end of a third stilbene synthase gene (Vst3) were located within the 13 kb fragment. Vst1 and Vst2, differing only slightly in the coding region, are distinguished in the intron size and in the structure of the promoter region. The 5 flanking region of gene Vst1 contains a TATAA box at nucleotide –48. The substantial structural differences found for the promoters of the two genes are paralleled by a striking difference in the expression of the two genes in elicitor-treated cells. Moreover, the accumulation upon elicitation of six different stilbene synthase mRNAs was studied and found to differ by two orders of magnitude.     

1.56 Å structure of mature truncated human fibroblast collagenase

The X-ray crystal structure of a 19 kDa active fragment of human fibroblast collagenase has been determined by the multiple isomorphous replacement method and refined at 1.56 Å resolution to an R-factor of 17.4%. The current structure includes a bound hydroxamate inhibitor, 88 waters and three metal atoms (two zincs and a calcium). The overall topology of the enzyme, comprised of a five stranded β-sheet and three α-helices, is similar to the thermolysin-like metalloproteinases. There are some important differences between the collagenase and thermolysin families of enzymes. The active site zinc ligands are all histidines (His-218, His-222, and His-228). The presence of a second zinc ion in a structural role is a unique feature of the matrix metalloproteinases. The binding properties of the active site cleft are more dependent on the main chain conformation of the enzyme (and substrate) compared with thermolysin. A mechanism of action for peptide cleavage similar to that of thermolysin is proposed for fibroblast collagenase. © 1994 Wiley-Liss, Inc.     

On the use of the quenching of luminol luminescence to evaluate sod activity

Addition of horseradish peroxidase to a luminol solution (pH = 9.4) produces a burst of light followed by a steady luminescence that lasts for several minutes. This steady-state luminescence is readily quenched by SOD, with a concentration (the additive concentration needed to decrease by one-half the emitted luminescence intensity) of c.a. 4 ng/ml (14 mU/ml). The luminescence intensity decrease can then be employed to evaluate SOD activity in SOD-containing samples. However, the light intensity can also be quenched by additives, such as Trolox, that are able to trap luminol-derived intermediates. It is proposed that double quenching experiments must be performed in order to be able to relate the observed effect of an additive to its SOD-like activity.     

HPLC and NMR methods for the quantitation of the (R)-enantiomer in (−)-(S)-timolol maleate drug raw materials

HPLC and ¹H-NMR methods for the quantitation of the (R)-enantiomer in (?)-(S)-timolol maleate were developed and validated. The HPLC method requires a 25 cm × 4.6 mm 5 μm Chiracel OD-H (cellulose tris-3,5-dimethylphenylcarbamate) column, a mobile phase of 0.2% (v/v) diethylamine and 4% (v/v) isopropanol in hexane at a flow rate of 1 ml/min and UV detection at 297 nm. A system suitability test was devised to verify the separation of the (R)- and (S)-enantiomers of timolol from other drug-related impurities. The NMR method requires the use of a high-field NMR spectrometer (>360 MHz) and a chiral solvating agent, (?)-(R)-2,2,2-trifluoro-1-(9-anthrylethanol) (R-TFAE). The limits of quantitation were 0.05% and 0.2% (m/m) for HPLC and NMR, respectively. The methods were applied to the determination of the (R)-enantiomer in eight lots of raw material. The results for the two methods were in very good agreement, with results ranging from 0.1 to 4.1% (m/m) by HPLC and none detected to 4.3% (m/m) by NMR. The USP method for specific rotation was found to be unsuitable for detecting the presence of low levels of the (R)-enantiomer in (?)-(S)-timolol maleate. © 1994 Wiley-Liss, Inc.     

Enantioselective separations using capillary electrophoresis

The preconditions are outlined for enantioselective separations in capillary electrophoresis (CE) with chiral selectors as additives to the background electrolyte. Free solution capillary electrophoresis conditions are characterised by a single solution phase. Chiral separations are reviewed by selector type (chiral ligand exchange, cyclodextrins, crown ethers, glycoproteins) with the extensive studies on cyclodextrins grouped into sections on amino acids, pharmaceuticals, and speciality chemicals, optimisation, biological fluids, and quantitative aspects. In micellar electrokinetic capillary chromatography, enantioselective discrimination occurs by partition in a two-phase system, with a chiral micellar phase as selector. Optimum separation conditions can be readily predicted for a given selector–selectand combination, and absolute values of binding constants determined by CE. Advantages of CE in comparison with HPLC using a chiral stationary phase include robust, rapid assays and the use of small volumes of aqueous solutions; disadvantages include less favourable detection limits. © 1994 Wiley-Liss, Inc.     

Chiral HPLC with carbohydrate carbamates: Influence of support structure on enantioselectivity

The effect of particle size and pore size of the aminopropylated silica support for cellulose tris(phenylcarbamate) and tris(3,5-dimethylphenylcarbamate) chiral HPLC phases was investigated. It was necessary to reduce phase loading below 20% w/w as pore size and particle size were reduced, but high efficiency columns could be prepared at a 15% w/w loading on 5 and 2.5 μm supports with 120-Å-diameter pores. The 2.5 μm phase permits the use of relatively high flow rates and very efficient enantioselective separations of a range of chiral compounds could be achieved in less than 3 min. © 1994 Wiley-Liss, Inc.     

Direct determination of the enantiomeric purity of (R)- and (S)-2-hydroxy-4-phenylbutyric acid

The determination of enantiomeric purity of (R)- and (S)-2-hydroxy-4-phenylbutyric acid by chiral HPLC is described. Good resolution has been obtained on covalently bonded L-hydroxyproline saturated with Cu(II) ions. The method makes possible the determination of enantiomeric purity in media containing growing cells. © 1994 Wiley-Liss, Inc.