Excitation and deexcitation processes of Eu(III) benzo-15-crown-5 complex studied on comparing with its first coordination sphere

The coordination sphere and the deexcitation mechanism of the Eu(III) benzo-15-crown-5 complex, Eu(B15C5), were studied with references of the Eu(III) complexes with a similar coordination sphere; the dibenzo-18-crown-6 complex, Eu₃(B₂18C6)₂, and the cryptand[2.2.1] complex, Eu([2.2.1]). NMR spectroscopy reveals that the Eu(B15C5) complex is quite stable in acetonitrile solution whereas only 40% of the Eu(III) ion forms the complex in the equimolar Eu(NO₃)₃ and B₂18C6 acetonitrile solution. The coordination sphere of the Eu(III) complexes in acetonitrile solutions were also discussed by the degenerate ⁷F₀→⁵D₀ transition energy levels. The Eu(B15C5) have a negative shift compared with the europium(III) nitrate in acetonitrile and it is explained by the coordination of both nitrate ions and the crown ether ligand. Energy transfer from the n–π* excited state located in the catechol structure to the central europium ion was first observed as the sensitized luminescence of ⁵D₀→⁷F_J. The excited state lifetime of the Eu(B15C5) complex was first determined as 201 μs in the present study.     

Autofluorescence imaging identifies tumor cell‐cycle status on a single‐cell level

The goal of this study is to validate fluorescence intensity and lifetime imaging of metabolic co‐enzymes NAD(P)H and FAD (optical metabolic imaging, or OMI) as a method to quantify cell‐cycle status of tumor cells. Heterogeneity in tumor cell‐cycle status (e. g. proliferation, quiescence, apoptosis) increases drug resistance and tumor recurrence. Cell‐cycle status is closely linked to cellular metabolism. Thus, this study applies cell‐level metabolic imaging to distinguish proliferating, quiescent, and apoptotic populations. Two‐photon microscopy and time‐correlated single photon counting are used to measure optical redox ratio (NAD(P)H fluorescence intensity divided by FAD intensity), NAD(P)H and FAD fluorescence lifetime parameters. Redox ratio, NAD(P)H and FAD lifetime parameters alone exhibit significant differences (p<0.05) between population means. To improve separation between populations, linear combination models derived from partial least squares ‐ discriminant analysis (PLS‐DA) are used to exploit all measurements together. Leave‐one‐out cross validation of the model yielded high classification accuracies (92.4 and 90.1 % for two and three populations, respectively). OMI and PLS‐DA also identifies each sub‐population within heterogeneous samples. These results establish single‐cell analysis with OMI and PLS‐DA as a label‐free method to distinguish cell‐cycle status within intact samples. This approach could be used to incorporate cell‐level tumor heterogeneity in cancer drug development.

     

Are there interactive effects of mate availability and predation risk on life history and defence in a simultaneous hermaphrodite?

Encountering mates and avoiding predators are ubiquitous challenges faced by many organisms and they can affect the expression of many traits including growth, timing of maturity and resource allocation to reproduction. However, these two factors are commonly considered in isolation rather than simultaneously. We examined whether predation risk and mate availability interact to affect morphology and life-history traits (including lifetime fecundity) of a hermaphroditic snail (Physa acuta). We found that mate availability reduced juvenile growth rate and final size. Predator cues from crayfish induced delayed reproduction, but there were no reduced fecundity costs associated with predator induction. Although there were interactive effects on longevity, lifetime fecundity was determined by the number of reproductive days. Therefore, our results indicate a resource-allocation trade-off among growth, longevity and reproduction. Future consideration of this interaction will be important for understanding how resource-allocation plasticity affects the integration of defensive, life-history and mating-system traits.     

High‐Performance Multilayer Encapsulation for Perovskite Photovoltaics

An encapsulation system comprising of a UV‐curable epoxy, a solution processed polymer interlayer, and a glass cover‐slip, is used to increase the stability of methylammonium lead triiodide (CH₃NH₃PbI₃) perovskite planar inverted architecture photovoltaic (PV) devices. It is found this encapsulation system acts as an efficient barrier to extrinsic degradation processes (ingress of moisture and oxygen), and that the polymer acts as a barrier that protects the PV device from the epoxy before it is fully cured. This results in devices that maintain 80% of their initial power conversion efficiency after 1000 h of AM1.5 irradiation. Such devices are used as a benchmark and are compared with devices having initially enhanced efficiency as a result of a solvent annealing process. It is found that such solvent‐annealed devices undergo enhanced burn‐in and have a reduced long‐term efficiency, a result demonstrating that initially enhanced device efficiency does not necessarily result in long‐term stability.     

Fluctuating asymmetry and lifetime mating success are correlated in males of the damselfly Coenagrion puella (Odonata: Coenagrionidae)

Abstract.

• 1 The influence of fluctuating asymmetry on lifetime mating success of males of the damselfly Coenagrion puella (Odonata: Coenagrionidae) was investigated. Fluctuating asymmetry was measured as the difference in length of left and right fore and hind wings.
• 2 Males with more symmetrical wings enjoyed higher lifetime mating success.
• 3 Larger males, in contrast to a previous study of this species, also had higher mating success. This may be attributed to differences in the weather conditions prevailing at the time of the studies.

     

Molecular dynamics and interactions for creation of stimulation-induced stabilized rafts from small unstable steady-state rafts

We have evaluated the sizes and lifetimes of rafts in the plasma membrane from the existing literature, with a special attention paid to their intrinsically broad distributions and the limited time and space scales that are covered by the observation methods used for these studies. Distinguishing the rafts in the steady state (reserve rafts) from those after stimulation or unintentional crosslinking of raft molecules (stabilized receptor-cluster rafts) is critically important. In resting cells, the rafts appear small and unstable, and the consensus now is that their sizes are smaller than the optical diffraction limit (250 nm). Upon stimulation, the raft-preferring receptors are clustered, inducing larger, stabilized rafts, probably by coalescing small, unstable rafts or cholesterol-glycosphingolipid complexes in the receptor clusters. This receptor-cluster-induced conversion of raft types may be caused by suppression of alkyl chain isomerization and the lipid lateral diffusion in the cluster, with the aid of exclusion of cholesterol from the bulk domain and the boundary region of the majority of transmembrane proteins. We critically inspected the possible analogy to the boundary lipid concept. Finally, we propose a hypothesis for the coupling of GPI-anchored receptor signals with lipid-anchored signaling molecules in the inner-leaflet raft.     

The use of isochronal reference standards in phase and modulation fluorescence lifetime measurements

Errors in phase and modulation lifetime measurements observed with the only commercially available instrument are readily apparent when the Debye-Sears modulation tank is not perfectly tuned. Unfortunately, we have found that exact tuning was extremely difficult to achieve and maintain. We report that these errors could be reduced by using single-lifetime (homogeneous) reference standards whose fluorescence lifetime approximated that of the unknown sample (isochronal standards). A number of useful standards are suggested. In the proposed method, the phase shift and relative modulation of the sample emission are measured using the isochronal standard as a reference to determine the effective characteristics of the sinusoidal excitation. The importance of the improvement in accuracy accomplished by the proposed methods is illustrated by the accurate resolution of fluorescence lifetime heterogeneity for two known heterogeneous samples.     

Environmental sustainability of orthopedic devices produced with powder bed fusion

Additive manufacturing consists in melting metallic powders to produce objects from 3D data, layer upon layer. Its industrial applications range from automotive, biomedical (e.g., prosthetic implants for dentistry and orthopedics), aeronautics and others. This study uses life cycle assessment to evaluate the possible improvement in environmental performance of laser‐based powder bed fusion additive manufacturing systems on prosthetic device production. Environmental impacts due to manufacturing, use, and end of life of the designed solution were assessed. In addition, two powder production technologies, gas atomization (GA) and plasma atomization (PA), were compared in order to establish the most sustainable one. Production via traditional subtractive technologies and the additive manufacturing production were also compared. 3D building was found to have a significant environmental advantage compared to the traditional technology. The powder production process considerably influences on a damage point of view the additive manufacturing process; however, its impact can be mitigated if GA powders are employed.     

In vitro and in vivo phasor analysis of stoichiometry and pharmacokinetics using short‐lifetime near‐infrared dyes and time‐gated imaging

We introduce a simple new approach for time‐resolved multiplexed analysis of complex systems using near‐infrared (NIR) dyes, applicable to in vitro and in vivo studies. We show that fast and precise in vitro quantification of NIR fluorophores' short (subnanosecond) lifetime and stoichiometry can be done using phasor analysis, a computationally efficient and user‐friendly representation of complex fluorescence intensity decays obtained with pulsed laser excitation and time‐gated camera imaging. We apply this approach to the study of binding equilibria by Förster resonant energy transfer using two different model systems: primary/secondary antibody binding in vitro and ligand/receptor binding in cell cultures. We then extend it to dynamic imaging of the pharmacokinetics of transferrin engagement with the transferrin receptor in live mice, elucidating the kinetics of differential transferrin accumulation in specific organs, straightforwardly differentiating specific from nonspecific binding. Our method, implemented in a freely‐available software, has the advantage of time‐resolved NIR imaging, including better tissue penetration and background‐free imaging, but simplifies and considerably speeds up data processing and interpretation, while remaining quantitative. These advances make this method attractive and of broad applicability for in vitro and in vivo molecular imaging and could be extended to applications as diverse as image‐guided surgery or optical tomography.      

Number and size of clutch in Ptomascopus morio (Coleoptera: Silphidae: Nicrophorinae), with comparisons to Nicrophorus

Ptomascopus morio displays simpler parental care than Nicrophorus species. The effects of carcass size and clutch number on clutch size in P. morio were examined. Clutch size was related to carcass size. There was a negative correlation between number of clutch and clutch size for most sizes of carcass. Longevity of females was shorter when the carcass size was larger, such that total lifetime fecundity did not differ among carcasses of different sizes. The clutch size of P. morio was larger than that of Nicrophorus quadripunctatus. The clutch size of P. morio declined rapidly with repeated clutch production, but that of N. quadripunctatus was rather constant. This indicates that N. quadripunctatus maintains a more constant clutch size than P. morio over several reproductive attempts, although the former displays more complex parental care.