Vibrational spectroscopy of an algal Phot-LOV1 domain probes the molecular changes associated with blue-light reception

The LOV1 domain of the blue light Phot1-receptor (phototropin homolog) from Chlamydomonas reinhardtii has been studied by vibrational spectroscopy. The FMN modes of the dark state of LOV1 were identified by preresonance Raman spectroscopy and assigned to molecular vibrations. By comparing the blue-light-induced FTIR difference spectrum with the preresonance Raman spectrum, most of the differences are due to FMN modes. Thus, we exclude large backbone changes of the protein that might occur during the phototransformation of the dark state LOV1-447 into the putative signaling state LOV1-390. Still, the presence of smaller amide difference bands cannot be excluded but may be masked by overlapping FMN modes. The band at 2567 cm(-1) is assigned to the S-H stretching vibration of C57, the residue that forms the transient thio-adduct with the chromophore FMN. The occurrence of this band is evidence that C57 is protonated in the dark state of LOV1. This result challenges conclusions from the homologous LOV2 domain from oat that the thiolate of the corresponding cysteine is the reactive species.     

The reflectance properties of plant internodes modify elongation responses to lateral far-red radiation

The quality and quantity of light reflected from Nicotinia tabacum L. internodes was monitored as the angle of incidence was varied. Reflectance of incident light, which was either normal or longitudinal to the internode axis, was investigated. Increasing the angle of incidence caused a greater proportion of incident light to be reflected. Light striking N. tabacum internodes was always modified prior to reflection, and smaller incident angles produced greater modification of the reflected light quality. At larger angles, interactions with the internode were reduced. As a parallel investigation, the extension growth rate of light-grown Sinapis alba L. seedlings was monitored continuously using sensitive linear displacement transducers. When the angle of illumination by fibre-optic probes, presenting far-red light to the growing internode, was changed from 0° to 45°, an increase was observed in stem extension rate. There is a possibility that this rate increase was the result of a fall in the red:far-red ratio (R:FR) present inside the plant internode as the angle of incidence was altered. However, it is more likely that it was due to the larger surface area of stem being illuminated. The consequences of these observations are discussed in relation to the potential influence of such modified reflections on canopy light environments and resultant shade responses which may occur when light of known R:FR impinges on plant internodes at angles other than 0°. The possibility is discussed that plants may perceive the quality of reflected radiation from neighbouring plants to be substantially different dependent upon the angle at which it is reflected.     

G蛋白偶联受体与G蛋白相互作用的最新研究进展

传统观念认为,在激动剂作用下,G蛋白偶联受体(GPCRs)能够激活G蛋白的α亚基,从而使Gα亚基与Gβγ亚基分离,被激活的Gα亚基通过信号转导进一步参与细胞的生理过程。但是,最新研究发现GPCRs和G蛋白存在多种偶联关系,GPCRs不仅能够激活Gα亚基,还可以与Gβγ亚基相互靠近,甚至会使G蛋白亚基构象发生重排而不分离,这对于疾病发病机制的研究及新的药物靶点的发现具有重要意义。就GPCRs与G蛋白之间的相互作用以及最新研究技术作一简要综述。     

Molecular mechanism of bundle formation by the bacterial actin ParM

The actin homolog ParM plays a microtubule-like role in segregating DNA prior to bacterial cell division. Fluorescence and cryo-electron microscopy have shown that ParM forms filament bundles between separating DNA plasmids in vivo. Given the lack of ParM bundling proteins it remains unknown how ParM bundles form at the molecular level. Here we show using time-lapse TIRF microscopy, under in vitro molecular crowding conditions, that ParM-bundle formation consists of two distinct phases. At the onset of polymerization bundle thickness and shape are determined in the form of nuclei of short helically disordered filaments arranged in a liquid-like lattice. These nuclei then undergo an elongation phase whereby they rapidly increase in length. At steady state, ParM bundles fuse into one single large aggregate. This behavior had been predicted by theory but has not been observed for any other cytomotive biopolymer, including F-actin. We employed electron micrographs of ParM rafts, which are 2-D analogs of 3-D bundles, to identify the main molecular interfilament contacts within these suprastructures. The interface between filaments is similar for both parallel and anti-parallel orientations and the distribution of filament polarity is random within a bundle. We suggest that the interfilament interactions are not due to the interactions of specific residues but rather to long-range, counter ion mediated, electrostatic attractive forces. A randomly oriented bundle ensures that the assembly is rigid and that DNA may be captured with equal efficiency at both ends of the bundle via the ParR binding protein.     

Reflective properties of different eyespot types in dinoflagellates

The reflective properties of different types of dinoflagellate eyespots were investigated using confocal laser scanning microscopy in the epireflection contrast mode. Although the eyespots studied differed with respect to localization (cytosol or plastid) and organization of the globule layer(s), all types effectively absorbed and reflected blue-green laser light (principal lines of 488/514 nm). The relative orientation of the eyespot surface towards the light source strongly influenced the reflective properties. Maximal reflection occurred when the eyespot surface was approximately perpendicular to the light source and rapidly decreased at increasing angles of light incidence. Horizontal and vertical optical sectioning of live and fixed cells resolved differences in the reflection patterns. Focusing of reflected light on the basal portion of the longitudinal flagellum was observed for the cytosolic eyespot of Glenodinium sp. and the triple membrane-bounded eyespot of Peridinium foliaceum, presumably a vestige of a host plastid. This flagellum is thought to be mainly involved in mediating orientational movement responses. In contrast, the reflection patterns obtained from the eyespot of Woloszynskia pascheri, which represents the third and most commonly observed dinoflagellate eyespot type within a plastid, point to only minor focusing. Reflection signals could be followed a considerable distance into the sulcus in all cases, indicating that in dinoflagellate eyespots, irrespective of the presumed receptor location (plasma membrane overlying the eyespot and/or the basal part of the longitudinal flagellum), back reflection of non-absorbed light can enhance the excitation probability of the photoreceptor(s). Such a combined reflection/absorption screen allows maximal contrast modulation and will, in conjunction with the specialized geometry of the dinoflagellate eyespots, increase the directionality of these eyespot aparatuses considerably.     

An artificial osmotic cell: a model system for simulating osmotic processes and for studying phenomena of negative pressure in plants

Abstract An artificial osmotic cell has been constructed using reverse osmosis membranes. The cell consisted of a thin film of an osmotic solution (thickness: 100 to 200 μm) containing a non-permeating solute and was bounded between the membrane and the front plate of a pressure transducer which continuously recorded cell turgor. The membrane was supported by metal grids to withstand positive and negative pressures (P). At maximum, negative pressures of up to –0.7 MPa (absolute) could be created within the film on short-term and pressures of up to –0.3 MPa could be maintained without cavitation for several hours. As with living plant cells, the application of osmotic solutions of a non-permeating solute resulted in monophasic relaxations of turgor pressure from which the hydraulic conductivity of the membrane (Lp) and the elastic modulus of the cell (?) could be estimated. The application of solutions with permeating solutes resulted in biphasic pressure relaxation curves (as for living cells) from which the permeability (P_s) and reflection (σ_s) coefficients could be evaluated for the given membrane. Lp, P_s, and σ_s were independent of P and did not change upon transition from the positive to the negative range of pressure. It is concluded that the artificial cell could be used to simulate certain transport properties of living cells and to study phenomena of negative pressure as they occur in the xylem and, perhaps, also in living cells of higher plants.     

Artifact‐free objective‐type multicolor total internal reflection fluorescence microscopy with light‐emitting diode light sources—Part I

Total internal reflection fluorescence excitation (TIRF) microscopy allows the selective observation of fluorescent molecules in immediate proximity to an interface between different refractive indices. Objective‐type or prism‐less TIRF excitation is typically achieved with laser light sources. We here propose a simple, yet optically advantageous light‐emitting diode (LED)‐based implementation of objective‐type TIRF (LED‐TIRF). The proposed LED‐TIRF condenser is affordable and easy to set up at any epifluorescence microscope to perform multicolor TIRF and/or combined TIRF‐epifluorescence imaging with even illumination of the entire field of view. Electrical control of LED light sources replaces mechanical shutters or optical modulators. LED‐TIRF microscopy eliminates safety burdens that are associated with laser sources, offers favorable instrument lifetime and stability without active cooling. The non‐coherent light source and the type of projection eliminate interference fringing and local scattering artifacts that are associated with conventional laser‐TIRF. Unlike azimuthal spinning laser‐TIRF, LED‐TIRF does not require synchronization between beam rotation and the camera and can be monitored with either global or rolling shutter cameras. Typical implementations, such as live cell multicolor imaging in TIRF and epifluorescence of imaging of short‐lived, localized translocation events of a Ca²⁺‐sensitive protein kinase C α fusion protein are demonstrated.     

DPP-4 inhibitor des-F-sitagliptin treatment increased insulin exocytosis from db/db mice β cells

Incretin promotes insulin secretion acutely. Recently, orally-administered DPP-4 inhibitors represent a new class of anti-hyperglycemic agents. Indeed, inhibitors of dipeptidyl peptidase-IV (DPP-4), sitagliptin, has just begun to be widely used as therapeutics for type 2 diabetes. However, the effects of sitagliptin-treatment on insulin exocytosis from single β-cells are yet unknown. We therefore investigated how sitagliptin-treatment in db/db mice affects insulin exocytosis by treating db/db mice with des-F-sitagliptin for 2 weeks. Perfusion studies showed that 2 weeks-sitagliptin treatment potentiated insulin secretion. We then analyzed insulin granule motion and SNARE protein, syntaxin 1, by TIRF imaging system. TIRF imaging of insulin exocytosis showed the increased number of docked insulin granules and increased fusion events from them during first-phase release. In accord with insulin exocytosis data, des-F-sitagliptin-treatment increased the number of syntaxin 1 clusters on the plasma membrane. Thus, our data demonstrated that 2-weeks des-F-sitagliptin-treatment increased the fusion events of insulin granules, probably via increased number of docked insulin granules and that of syntaxin 1 clusters.     

Antibody adsorption on the surface of water studied by neutron reflection

Surface and interfacial adsorption of antibody molecules could cause structural unfolding and desorbed molecules could trigger solution aggregation, resulting in the compromise of physical stability. Although antibody adsorption is important and its relevance to many mechanistic processes has been proposed, few techniques can offer direct structural information about antibody adsorption under different conditions. The main aim of this study was to demonstrate the power of neutron reflection to unravel the amount and structural conformation of the adsorbed antibody layers at the air/water interface with and without surfactant, using a monoclonal antibody ‘COE-3′ as the model. By selecting isotopic contrasts from different ratios of H₂O and D₂O, the adsorbed amount, thickness and extent of the immersion of the antibody layer could be determined unambiguously. Upon mixing with the commonly-used non-ionic surfactant Polysorbate 80 (Tween 80), the surfactant in the mixed layer could be distinguished from antibody by using both hydrogenated and deuterated surfactants. Neutron reflection measurements from the co-adsorbed layers in null reflecting water revealed that, although the surfactant started to remove antibody from the surface at 1/100 critical micelle concentration (CMC) of the surfactant, complete removal was not achieved until above 1/10 CMC. The neutron study also revealed that antibody molecules retained their globular structure when either adsorbed by themselves or co-adsorbed with the surfactant under the conditions studied.     

Effects of ELF magnetic field on membrane protein structure of living HeLa cells studied by Fourier transform infrared spectroscopy

The effects of exposure to a 50 Hz magnetic field (maximum of 41.7 to 43.6 mT) on the membrane protein structures of living HeLa cells were studied using attenuated total reflection infrared spectroscopy. One min of such exposure shifted peak absorbance of the amide I band to a smaller wave number, reduced peak absorbance of the amide II band, and increased absorbance at around 1600 cm(-1). These results suggest that exposure to the ELF magnetic field has reversible effects on the N-H inplane bending and C-N stretching vibrations of peptide linkages, and changes the secondary structures of alpha-helix and beta-sheet in cell membrane proteins.