Mathematical model of fructan biosynthesis and polymer length distribution in plants

Background and Aims

There are many unresolved issues concerning the biochemistry of fructan biosynthesis. The aim of this paper is to address some of these by means of modelling mathematically the biochemical processes.

Methods

A model has been constructed for the step-by-step synthesis of fructan polymers. This is run until a steady state is achieved for which a polymer distribution is predicted. It is shown how qualitatively different distributions can be obtained.

Key Results

It is demonstrated how a set of experimental results on polymer distribution can by simulated by a simple parameter adjustments.

Conclusions

Mathematical modelling of fructan biosynthesis can provide a useful tool for helping elucidate the details of the biosynthetic processes.     

Antimicrobial and antifouling polymeric coating mitigates persistence of Pseudomonas aeruginosa biofilm

Abstract

Food wasted due to food spoilage remains a global challenge to the environmental sustainability and security of food supply. In food manufacturing, post-processing contamination of food can occur due to persistent bacterial biofilms, which can be resistant to conventional cleaning and sanitization. The objective was to characterize the efficacy of a polymeric coating in reducing Pseudomonas aeruginosa biofilm establishment and facilitating its removal. Viable cell density of a 48?h biofilm was reduced by 2.10 log cfu cm^?2 on the coated surface, compared to native polypropylene. Confocal laser scanning and electron microscopy indicated reductions in mature biofilm viability and thickness on the coated material. The antifouling coating improved cleanability, with ～2.5 log cfu cm^?2 of viable cells remaining after 105?min cleaning by water at 65?°C, compared to 4.5 log cfu cm^?2 remaining on native polypropylene. Such coatings may reduce the persistence of biofilms in food processing environments, in support of reducing food spoilage and waste     

Amphiphilic block copolymer/poly(dimethylsiloxane) (PDMS) blends and nanocomposites for improved fouling-release

Amphiphilic diblock copolymers, Sz6 and Sz12, consisting of a poly(dimethylsiloxane) block (average degree of polymerisation = 132) and a PEGylated-fluoroalkyl modified polystyrene block (Sz, average degree of polymerisation = 6, 12) were prepared by atom transfer radical polymerization (ATRP). Coatings were obtained from blends of either block copolymer (1–10 wt%) with a poly(dimethylsiloxane) (PDMS) matrix. The coating surface presented a simultaneous hydrophobic and lipophobic character, owing to the strong surface segregation of the lowest surface energy fluoroalkyl chains of the block copolymer. Surface chemical composition and wettability of the films were affected by exposure to water. Block copolymer Sz6 was also blended with PDMS and a 0.1 wt% amount of multiwall carbon nanotubes (CNT). The excellent fouling-release (FR) properties of these new coatings against the macroalga Ulva linza essentially resulted from the inclusion of the amphiphilic block copolymer, while the addition of CNT did not appear to improve the FR properties.     

Study of PE and iPP orientations on the surface of carbon nanotubes by using molecular dynamic simulations

In this study, the early stage of interfacial crystallisation behaviour of low molecular weight polyethylene (PE) and isotactic polypropylene (iPP) oligomer on the surface of carbon nanotubes (CNTs) with different diameters, chiralities and topography structures was studied using MD simulations. We started to simulate the effect of CNTs chirality and diameter on PE molecular chain orientation, and then the effect of CNTs topography structure on PE and iPP molecular chain orientation was investigated. Finally, some experiments were carried out to prove the simulated results. Our study shows that for CNTs with a diameter comparable with the radius of gyration (R_g) of a polymer chain, an easy orientation of PE chains along CNTs axis is observed for all the systems of the CNTs with different chiralities due to a geometric confinement effect. For CNTs with a much larger diameter, multiple orientation of PE chains is induced on its surface due to the lattice matching between graphite lattice and PE molecular chains. In this case, the chirality of CNTs dominates the orientation of graphite lattice, which determines the orientation of PE chains arrangement on CNTs surface. More importantly, it was found that the groove structure formed by CNT bundles is very useful for the stabilisation of polymer chain, and thus facilitates the orientation of molecular chain along the long axis of CNTs. As a result, a novel nanohybrid shish–kebab (NHSK) structure with CNTs acting as central shish while polymer lamellae as kebab can be successfully obtained for both PE with zigzag conformation and iPP with helical conformation. This simulation result was well supported by the experimental observation. Our study could provide not only a deep understanding of the origin of the polymer chain orientation on CNTs surface but also the guidance for the preparation of polymer/CNTs nanocomposites with novel NHSK structure.     

Dissipative particle dynamics simulation of the soft micro actuator using polymer chain displacement in electro-osmotic flow

ABSTRACT

In this research, the numerical simulation of a soft polymer micro actuator performance has been investigated using the dissipative particle dynamics method in electro-osmotic flow. Effective factors including electro-osmotic flow and polymer chain parameters have been studied. First of all, considering a wide range of electro-osmotic parameters, the validation of analytical results is carried out in a simple micro channel. The electric field and zeta potential changes are linearly related to the flow rate, and the kh parameter behaves nonlinearly to around the kh?=?10. In the following, a convergent–divergent channel is used for the soft micro actuator simulation in which a polymer chain as a heart of actuation is embedded in the middle. As the main control parameter, the direction of the electric field is changed every 4?s, and it leads to a reciprocating motion. The numerical results indicate that the displacement of the soft polymer chain will be increased by enhancing the electric field, the number of beads, decreasing the harmonic bond coefficient and also exposing more length of a polymer chain in front of fluid flow. The results of this study may be useful for some future applications such as artificial fibres and muscles.     

A comparison of model linear chain molecules with constrained and flexible bond lengths under planar Couette and extensional flows

We compare directly under flow two commonly used coarse grained models of linear polymers, namely the flexible finitely extensible nonlinear elastic (FENE) chain, and the freely jointed tangent sphere chain, otherwise known as the freely jointed chain. The comparison is based on viscometric, structural and dynamical properties. We use non-equilibrium molecular dynamics to simulate steady-state systems under planar Couette flow and planar extensional flow. Computed properties include shear and elongational viscosities, normal stresses, radius of gyration and end-to-end distances, order parameters, alignment angles and spin angular velocities. In all computed properties we observe very little difference between the two molecular models. Therefore, the choice of either model is suitable, though there is a computational advantage in the use of the FENE model.     

Depletion interaction in colloid/polymer mixtures: application of density functional theory

Insert-route density functional approach (IRDFT), modified fundamental measure theory (MFMT) and thermodynamic perturbation theory (TPT1 and TPT2) are combined to study the depletion force between colloidal particles in hard sphere/hard sphere chain mixtures which represent a model of systems containing colloids dispersed in an athermal polymer solution. The predicted results are compared to simulations showing the reliability of the method used which captures the main characteristics of depletion interaction between colloids induced by polymers. Results of TPT2 are slightly more repulsive and better than that of TPT1 especially when the inter-particle distance is small than the diameter of polymer segment indicating the essential influence of the three-body correlations. Effects of the polymer density, polymer chain length and size ratio of colloid to polymer segment on the depletion force are studied in detail. Due to a little deterioration of the prediction in the high density region, further improvement is anticipated to better balance the competition between the excluded-volume effect and the chain connectivity.     

Laccase immobilization and insolubilization: from fundamentals to applications for the elimination of emerging contaminants in wastewater treatment

Over the last few decades many attempts have been made to use biocatalysts for the biotransformation of emerging contaminants in environmental matrices. Laccase, a multicopper oxidoreductase enzyme, has shown great potential in oxidizing a large number of phenolic and non-phenolic emerging contaminants. However, laccases and more broadly enzymes in their free form are biocatalysts whose applications in solution have many drawbacks rendering them currently unsuitable for large scale use. To circumvent these limitations, the enzyme can be immobilized onto carriers or entrapped within capsules; these two immobilization techniques have the disadvantage of generating a large mass of non-catalytic product. Insolubilization of the free enzymes as cross-linked enzymes (CLEAs) is found to yield a greater volume ratio of biocatalyst while improving the characteristics of the biocatalyst. Ultimately, novel techniques of enzymes insolubilization and stabilization are feasible with the combination of cross-linked enzyme aggregates (combi-CLEAs) and enzyme polymer engineered structures (EPESs) for the elimination of emerging micropollutants in wastewater. In this review, fundamental features of laccases are provided in order to elucidate their catalytic mechanism, followed by different chemical aspects of the immobilization and insolubilization techniques applicable to laccases. Finally, kinetic and reactor design effects for enzymes in relation with the potential applications of laccases as combi-CLEAs and EPESs for the biotransformation of micropollutants in wastewater treatment are discussed.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.