Free-energy landscapes of the coupled conformational transition and inclusion processes of altro-cyclodextrins

Abstract

Mono-altro-cyclodextrin (altro-CD) may undergo a conformational change of its altropyranose unit when encapsulating guest molecules of different sizes. This conformational transition is found to be coupled to the inclusion processes. In the present contribution, the possible conformational transition pathways in the four (self-)inclusion processes of altro-α and -β-CDs with moieties of variant shapes are explored from the insights of free-energy calculations. The two-dimensional free-energy landscapes characterising the coupled (self-)inclusion and isomerisation processes are determined, and the lowest free-energy pathways (LFEP) connecting the minima of the landscapes are located. The conformational statistics of the altropyranose units along the LFEPs reveal different transition pathways in the four (self-)inclusion processes. It can be concluded that when accommodating a free bulky guest molecule, the altropyranose unit will adjust its conformation to match the guest. However, such induced fit effect in the self-complexation of altro-CD derivatives will be weakened. The conformation of the altropyranose unit changes accompanying the self-complexation, but always adopts the ⁴C₁ one in the self-inclusion complex, irrespective of the shape of the guest moieties. The present results help determine the transition states of the (self-)inclusion processes of CDs and further improve the understanding of the mechanical properties of CD-based molecular shuttles.     

Roughness of the plasma membrane as an independent morphological parameter to study RBCs: A quantitative atomic force microscopy investigation

A novel approach to the study of RBCs based on the collection of three-dimensional high-resolution AFM images and on the measure of the surface roughness of their plasma membrane is presented. The dependence of the roughness from several parameters of the imaging was investigated and a general rule for a trustful analysis and comparison has been suggested. The roughness of RBCs is a morphology-related parameter which has been shown to be characteristic of the single cells composing a sample, but independent of the overall geometric shape (discocyte or spherocyte) of the erythrocytes, thus providing extra-information with respect to a conventional morphology study. The use of the average roughness value as a label of a whole sample was tested on different kinds of samples. Analyzed data revealed that the quantitative roughness value does not change after treatment of RBCs with various commonly used fixation and staining methods while a drastic decrease occurs when studying cells with membrane-skeletal alteration both naturally occurring or artificially induced by chemical treatments. The present method provides a quantitative and powerful tool for a novel approach to the study of erythrocytes structure through an ultrastructural morphological analysis with the potential to give information, in a non-invasive way, on the RBCs function.     

High-resolution atomic force microscopy visualization of metalloproteins and their complexes

Background

Metalloproteins myeloperoxidase (MPO), ceruloplasmin (CP) and lactoferrin (LF) play an important role in regulation of inflammation and oxidative stress in vertebrates. It was previously shown that these proteins may work synergetically as antimicrobial and anti-inflammatory agents by forming complexes, such as MPO-CP and LF-CP. However, interaction of metalloprotein molecules with each other has never been characterized at a single-molecule level.

Development of software for human muscle force estimation

Muscle force estimation (MFE) has become more and more important in exploring principles of pathological movement, studying functions of artificial muscles, making surgery plan for artificial joint replacement, improving the biomechanical effects of treatments and so on. At present, existing software are complex for professionals, so we have developed a new software named as concise MFE (CMFE). CMFE which provides us a platform to analyse muscle force in various actions includes two MFE methods (static optimisation method and electromyographic-based method). Common features between these two methods have been found and used to improve CMFE. A case studying the major muscles of lower limb of a healthy subject walking at normal speed has been presented. The results are well explained from the effect of the motion produced by muscles during movement. The development of this software can improve the accuracy of the motion simulations and can provide a more extensive and deeper insight in to muscle study.     

Local cryostimulation acutely preserves maximum isometric handgrip strength following fatigue in young women

Several types of cryostimulation have been recently proposed to rapidly lower skin temperature therefore gaining a possible neuro/muscular recovery after strenuous exercise or, more generally, in sports. Local cryostimulation may be a viable and relatively portable tool to obtain physiological benefits in previously-efforted muscular districts. However, cohesive and standardized cryo-exposure protocols are lacking as well as the righteous procedure to efficaciously combine duration, treatments and temperature in relation to desirable effects on muscular strength. In this randomized-controlled study, fifty young women were tested for maximum isometric handgrip strength, before and after exhausting contractions.Following the fatiguing protocol, the intervention group (cryo, n = 25, 24.7 ± 2.5 years, BMI 21.7 ± 1.8 kg/m²) underwent a 6-min local cryostimulation (−160 °C) on the extensor-flexor muscles of the dominant arm, while control-matched peers sat rested in a thermo-neutral room (22 ± 0.5 °C). Handgrip tests were repeated at baseline (T0), after cryostimulation (T1), and 15 min after T1 (T2). Throughout the protocol, the AUC of the strength performance was significantly higher in the cryo- compared to control group (P = 0.006). In particular, following fatigue and cryostimulation, the cryo group preserved higher strength at T1 with respect to controls (26.8 ± 2.8 vs 23.9 ± 2.8 kg, Bonferroni's post-hoc, P < 0.01). Likewise, ventral and dorsal temperature, recorded with a thermal camera, were lower in cryo- than control group (P < 0.0001).In conclusion, a brief session of local cryostimulation may acutely preserve maximal isometric force in young women following a fatiguing protocol. These findings may have implications in orchestrating strategies of district muscular recovery.     

Zipping and Unzipping of Adenylate Kinase: Atomistic Insights into the Ensemble of Open ↔ Closed Transitions

Adenylate kinase (AdK), a phosphotransferase enzyme, plays an important role in cellular energy homeostasis. It undergoes a large conformational change between an open and a closed state, even in the absence of substrate. We investigate the apo-AdK transition at the atomic level both with free-energy calculations and with our new dynamic importance sampling (DIMS) molecular dynamics method. DIMS is shown to sample biologically relevant conformations as verified by comparing an ensemble of hundreds of DIMS transitions to AdK crystal structure intermediates. The simulations reveal in atomic detail how hinge regions partially and intermittently unfold during the transition. Conserved salt bridges are seen to have important structural and dynamic roles; in particular, four ionic bonds that open in a sequential, zipper-like fashion and, thus, dominate the free-energy landscape of the transition are identified. Transitions between the closed and open conformations only have to overcome moderate free-energy barriers. Unexpectedly, the closed state and the open state encompass broad free-energy basins that contain conformations differing in domain hinge motions by up to 40°. The significance of these extended states is discussed in relation to recent experimental Förster resonance energy transfer measurements. Taken together, these results demonstrate how a small number of cooperative key interactions can shape the overall dynamics of an enzyme and suggest an “all-or-nothing” mechanism for the opening and closing of AdK. Our efficient DIMS molecular dynamics computer simulation approach can provide a detailed picture of a functionally important macromolecular transition and thus help to interpret and suggest experiments to probe the conformational landscape of dynamic proteins such as AdK.     

Pushing, pulling and trapping--modes of motor protein supported protein translocation

Protein translocation across the cellular membranes is an ubiquitous and crucial activity of cells. This process is mediated by translocases that consist of a protein conducting channel and an associated motor protein. Motor proteins interact with protein substrates and utilize the free energy of ATP binding and hydrolysis for protein unfolding, translocation and unbinding. Since motor proteins are found either at the cis- or trans-side of the membrane, different mechanisms for translocation have been proposed. In the Power stroke model, cis-acting motors are thought to push, while trans-motors pull on the substrate protein during translocation. In the Brownian ratchet model, translocation occurs by diffusion of the unfolded polypeptide through the translocation pore while directionality is achieved by trapping and refolding. Recent insights in the structure and function of the molecular motors suggest that different mechanisms can be employed simultaneously.     

Poly(dG)-poly(dC) DNA appears shorter than poly(dA)-poly(dT) and possibly adopts an A-related conformation on a mica surface under ambient conditions

Three types of DNA: approximately 2700 bp polydeoxyguanylic olydeoxycytidylic acid [poly(dG)-poly(dC)], approximately 2700 bp polydeoxyadenylic polydeoxythymidylic acid [poly(dA)-poly(dT)] and 2686 bp linear plasmid pUC19 were deposited on a mica surface and imaged by atomic force microscopy. Contour length measurements show that the average length of poly(dG)-poly(dC) is approximately 30% shorter than that of poly(dA)-poly(dT) and the plasmid. This led us to suggest that individual poly(dG)-poly(dC) molecules are immobilized on mica under ambient conditions in a form which is likely related to the A-form of DNA in contrast to poly(dA)-poly(dT) and random sequence DNA which are immobilized in a form that is related to the DNA B-form.     

Individual cartilage aggrecan macromolecules and their constituent glycosaminoglycans visualized via atomic force microscopy

Atomic force microscopy was used in ambient conditions to directly image dense and sparse monolayers of bovine fetal epiphyseal and mature nasal cartilage aggrecan macromolecules adsorbed on mica substrates. Distinct resolution of the non-glycosylated N-terminal region from the glycosaminoglycan (GAG) brush of individual aggrecan monomers was achieved, as well as nanometer-scale resolution of individual GAG chain conformation and spacing. Fetal aggrecan core protein trace length (398+/-57 nm) and end-to-end length (257+/-87 nm) were both larger than that of mature aggrecan (352+/-88 and 226+/-81 nm, respectively). Similarly, fetal aggrecan GAG chain trace length (41+/-7 nm) and end-to-end (32+/-8 nm) length were both larger than that of mature aggrecan GAG (32+/-5 and 26+/-7 nm, respectively). GAG-GAG spacing along the core protein was significantly smaller in fetal compared to mature aggrecan (3.2+/-0.8 and 4.4+/-1.2nm, respectively). Together, these differences between the two aggrecan types were likely responsible for the greater persistence length of the fetal aggrecan (110 nm) compared to mature aggrecan (82 nm) calculated using the worm-like chain model. Measured dimensions and polymer statistical analyses were used in conjunction with the results of Western analyses, chromatographic, and carbohydrate electrophoresis measurements to better understand the dependence of aggrecan structure and properties on its constituent GAG chains.