Multiscale simulation studies of geometrical effects on solution transport through nanopores

Due to intrinsic properties, solid-state nanopores are widely used in nanopore technology. Different geometries (cylindrical (CY), hourglass (HG) and conical (CO)) of artificial nanopores have been fabricated and studied. Each was found to promote different transport abilities experimentally. To explore such pore effects, the combination of finite element (FE) and molecular dynamics (MD) simulations with applied electric filed (150 mV) were performed. The dimension of anion-selective protein pore was used as a nanopore template. Different pore geometries with a narrowest diameter ranging from 1.8 to 1.8 μm were studied here. Firstly, we found that the narrowest regions at a pore orifice in CO and constriction site in HG maximise water velocity and consequently control a water flow rate. Secondly, CY triggers the highest water flux, but low ion selectivity, whilst the funnel-like geometries (HG and CO) enhance the ion selectivity significantly. Both HG and CO show similar degrees of permeant flux and selectivity. The orifice and constriction site in CO and HG are the main player for selectivity and permeation control. Thirdly, the transport properties are tuneable by changing the flow direction in asymmetric CO pore. The tip-to-base flow in CO obviously promotes stronger anion selectivity than the base-to-tip one.     

Virtual target screening reveals rosmarinic acid and salvianolic acid A inhibiting metallo- and serine-β-lactamases

Rosmarinic acid (RA), a polyphenolic phytochemical, has broad-spectrum biological and pharmacological activity. A virtual target screening method termed IFPTarget combined with enzyme inhibition assays led to the identification of the clinically relevant metallo-β-lactamase (MBL) VIM-2 as one of unexploited targets of RA. The enzyme kinetic studies indicated that RA is a fully reversible, substrate-competitive VIM-2 inhibitor. The isothermal titration calorimetry (ITC) analyses revealed that the initial binding of RA to VIM-2 is mainly due to enthalpy contribution. Further inhibition assays with RA related compounds revealed that salvianolic acid A, a derivative of RA, manifests potent inhibition to VIM-2, more interestingly, which shows inhibitory activity against the NDM-1, another clinically relevant MBL subtype, and the serine-β-lactamase TEM-1 that is structurally and mechanistically distinct from the VIM-2 and NDM-1.     

New Insight into Ni‐Rich Layered Structure for Next‐Generation Li Rechargeable Batteries

An increase in the amount of nickel in LiMO₂ (M = Ni, Co, Mn) layered system is actively pursued in lithium‐ion batteries to achieve higher capacity. Nevertheless, fundamental effects of Ni element in the three‐component layered system are not systematically studied. Therefore, to unravel the role of Ni as a major contributor to the structural and electrochemical properties of Ni‐rich materials, Co‐fixed LiNi_0.5+xCo_0.2Mn_0.3–xO₂ (x = 0, 0.1, and 0.2) layered materials are investigated. The results, on the basis of synchrotron‐based characterization techniques, present a decreasing trend of Ni²⁺ content in Li layer with increasing total Ni contents. Moreover, it is discovered that the c_hex.‐lattice parameter of layered system is not in close connection with the interslab thickness related to actual Li ion pathway. The interslab thickness increases with increasing Ni concentration even though the c_hex.‐lattice parameter decreases. Furthermore, the lithium ion pathway is preserved in spite of the fact that the c‐axis is collapsed at highly deintercalated states. Also, a higher Ni content material shows better structural properties such as larger interslab thickness, lower cation disorder, and smoother phase transition, resulting in better electrochemical properties including higher Li diffusivity and lower overpotential when comparing materials with lower Ni content.     

A Review on the Features and Progress of Dual‐Ion Batteries

Despite the wide application of lithium‐ion batteries in portable electronic devices and electric vehicles, the demand for new battery systems with the merits of high voltage, environmental friendliness, safety, and cost efficiency is still quite urgent. This perspective focuses on dual‐ion batteries (DIBs), in which, both the cations and anions are involved in the battery reaction. An anion's intercalation/deintercalation process on the cathode side allows the DIBs to operate at high voltages, which is favorable for enhanced energy density. However, electrolytes with a wide electrochemical window and suitable anion‐intercalation materials with highly reversible capacities should be developed. The progress of research into stable organic electrolytes, ionic liquids, and their effects on the electrochemical performances of DIBs are first discussed. Thereafter, the anion‐host materials including graphitic materials, organic materials, and their working mechanisms are discussed in detail. In addition, recently emerging DIB systems with high‐capacity anodes, or sodium‐, potassium‐ion involved battery reactions are also reviewed. The authors' recent work, demonstrating a generalized DIB construction using metal foil as both current collector and alloying anode material, which is successfully extended into lithium‐, sodium‐, and potassium‐based DIBs, is also discussed.     

Enhanced Ion Conductivity in Conducting Polymer Binder for High‐Performance Silicon Anodes in Advanced Lithium‐Ion Batteries

Polymer binders with high ion and electron conductivities are prepared by assembling ionic polymers (polyethylene oxide and polyethylenimine) onto the electrically conducting polymer poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonate) chains. Crosslinking, chemical reductions, and electrostatics increase the modulus of the binders and maintain the integrity of the anode. The polymer binder shows lithium‐ion diffusivity and electron conductivity that are 14 and 90 times higher than those of the widely used carboxymethyl cellulose (with acetylene black) binder, respectively. The silicon anode with the polymer binder has a high reversible capacity of over 2000 mA h g^?1 after 500 cycles at a current density of 1.0 A g^?1 and maintains a superior capacity of 1500 mA h g^?1 at a high current density of 8.0 A g^?1.     

Charge and Discharge Processes and Sodium Storage in Disodium Pyridine‐2,5‐Dicarboxylate Anode—Insights from Experiments and Theory

A combined experimental and computational study of disodium pyridine‐2,5‐dicarboxylate (Na₂PDC) is presented exploring the possibility of using it as a potential anode for organic sodium‐ion batteries. This electrode material can reversibly insert/release two Na cations per formula unit, resulting in high reversible capacity of 270 mA h g^?1 (236 mA h g^?1 after accounting for the contribution from Super P carbon) with excellent cyclability 225 mA h g^?1, with retention of 83% capacity after 100 cycles, and good rate performance with reversible capacity of 138 mA h g^?1 at a 5 C rate. The performance of disodium pyridine dicarboxylate is therefore found to be superior to that of the related and well investigated disodium terephthalate. The material shows two voltage plateaus at about 0.6 V up to Na₂₊₁PDC and then 0.4 V up to full sodiation, Na₂₊₂PDC. The first plateau is attributed to the coordination of inserted Na to nitrogen atoms with bond formation, i.e., a different mechanism from the terephthalate analog. The subsequent plateau is due to coordination to the carboxylic groups.     

Unusual Formation of CoO@C “Dandelions” Derived from 2D Kagóme MOLs for Efficient Lithium Storage

Despite great breakthroughs, the search for anode materials with high performance for lithium‐ion batteries (LIBs) remains challenging. Hence, engineering advantageous structures via effective routes can bring new possibilities to the development of the LIB field. Herein, the precise synthesis of three‐dimensional (3D) hybrids of ultrathin carbon‐wrapped CoO (CoO@C) dandelions is reported by the pyrolysis of two‐dimensional (2D) Kagóme metal–organic layers (MOLs) at 400 °C under an Ar atmosphere. Due to the special coordination structure of the paternal MOLs, the resulting CoO nanowires show a small diameter of 5–10 nm and are uniformly confined within the ultrathin carbon layer. Based on the time‐dependent pyrolysis experiments, a crystal transformation mechanism of in situ self‐templated‐recrystallization‐self‐assembly accompanied by phase and morphology changes is first presented to reveal the formation of the 3D dandelion‐like spheres with assembly of nanowire arrays from a 2D Kagóme MOL. By virtue of structural and compositional features, including a 3D array structure, the small size of the primary ultrathin nanowires, and a uniform ultrathin graphitic carbon layer, these unique CoO@C dandelions display high specific capacity, good rate capability, and excellent cycling stability. Importantly, this approach can be extended to accurately synthesize other desired composite structures.     

An Ultralong Lifespan and Low‐Temperature Workable Sodium‐Ion Full Battery for Stationary Energy Storage

Presently, commercialization of sodium‐ion batteries (SIBs) is still hindered by the relatively poor energy‐storage performance. In addition, low‐temperature (low‐T) Na storage is another principal concern for the wide application of SIBs. Unfortunately, the Na‐transfer kinetics is extremely sluggish at low‐T, as a result, there are few reports on low‐T SIBs. Here, an advanced low‐T sodium‐ion full battery (SIFB) assembled by an anode of 3D Se/graphene composite and a high‐voltage cathode (Na₃V₂(PO₄)₂O₂F) is developed, exhibiting ultralong lifespan (over even 15 000 cycles, the capacity retention is still up to 86.3% at 1 A g^?1), outstanding low‐T energy storage performance (e.g., all values of capacity retention are >75% after 1000 cycles at temperatures from 25 to ?25 °C at 0.4 A g^?1), and high‐energy/power properties. Such ultralong lifespan signifies that the developed sodium‐ion full battery can be used for longer than 60 years, if batteries charge/discharge once a day and 80% capacity retention is the standard of battery life. As a result, the present study not only promotes the practicability and commercialization of SIBs but also points out the new developing directions of next‐generation energy storage for wider range applications.