Use of SAMPL for a study of DNA polymorphism,genetic diversity and possible gene tagging in bread wheat

Selective Amplification of Microsatellite Polymorphic Loci (SAMPL) technology was used in bread wheat for the first time for a study of genetic diversity, genotype identification and gene tagging. The diversity studies involved 55 wheat genotypes and two SAMPL primer pairs (SAMPL-6 and SAMPL-7, each with a M-CAG primer), which together gave 43 polymorphic bands out of a total of 87 SAMPL bands. The average polymorphic information content (PIC) of SAMPL primers was 0.221 and that of SAMPL markers was 0.264. The marker index of SAMPL markers was 9.61. The genetic similarity (GS) coefficients for 1,485 pairs of genotypes ranged from 0.35 to 0.96 with an average of 0.65. A dendrogram was prepared on the basis of a similarity matrix using the UPGMA algorithm, which corresponded well with the results of principal component analysis (PCA). From a total of 55 genotypes, 54 could be distinguished using the SAMPL banding patterns of both primers. For gene tagging, 568 bands from a total of 1,185 SAMPL bands detected polymorphism between each of the three pairs of parents differing for grain protein content (GPC), pre-harvest sprouting tolerance (PHST) and grain weight (GW). An association of six bands with GPC, of seven bands with PHST and four bands with GW was observed using bulked segregant analysis (BSA). Received: 5 April 2001 / Accepted: 17 May 2001     

The structures of crystalline complexes of human serum amyloid P component with its carbohydrate ligand,the cyclic pyruvate acetal of galactose

Two monoclinic (P2(1)) crystal forms of human serum amyloid P component (SAP) in complex with the 4,6-pyruvate acetal of beta-D-galactose (MObetaDG) were prepared. Structure analysis by molecular replacement and refinement at 2.2A resolution revealed that crystal form 1 (a=95.76A, b=70.53A, c=103.41A, beta=96.80 degrees) contained a pentamer in the asymmetric unit with a structure very similar to that of the published search model. The mode of ligand co-ordination was also similar except that four of the five subunits showed bound ligand with an additional H-bond between O1 of the galactose and the side-chain of Lys79. One sub-unit showed no bound ligand and a vacant calcium site close to a crystal contact. The 2.6A resolution structure of crystal form 2 (a=118.60A, b=109.10A, c=120.80A and beta=95.16 degrees ) showed ten sub-units in the asymmetric unit, all with two bound calcium ions and ligand. The most extensive protein-protein interactions between pentamers describe an AB face-to-face interaction involving 15 ion pairs that sandwiches five molecules of bound MObetaDG at the interface.     

MS/MS profiling of taxoids from the needles of Taxus wallichiana

Ammonium cationisation has been used for taxoid profiling of partially purified methanolic extracts of needles of Taxus wallichiana growing in different regions of the Himalayas (Kashmir, Himachal Pradesh, UP Hills, Darjeeling, Sikkim and Arunachal Pradesh) by electrospray ionisation tandem mass spectrometry (MS/MS). The MS/MS spectra of the [M + NH4]+ or [M + H]+ ions gave structurally diagnostic fragment ions which revealed information about the taxane skeleton as well as the number and nature of the substituents. The rearranged 11(15-->1)-abeo-taxanes showed a characteristic elimination of the hydroxyisopropyl group with an acetoxy/benzoyloxy group from C-9. The identification of the taxoids was achieved by comparison of the MS/MS spectra with those of authentic taxoids or was based on biogenetic grounds. The results were corroborated by liquid chromatography-MS analysis. Out of the 50 taxoids identified, 21 belonged to the rearranged class. The presence of paclitaxel in the samples from four regions was confirmed: the study also revealed the occurrence of several basic taxoids in these samples. MS/MS profiling by electrospray ionisation was shown to be a fast and reliable technique for the analysis of taxoid samples.     

Impact of incorporating the 2C5 crystal structure into comparative models of cytochrome P450 2D6

Cytochrome P450 2D6 (CYP2D6) metabolizes approximately one third of the drugs in current clinical use. To gain insight into its structure and function, we have produced four different sets of comparative models of 2D6: one based on the structures of P450s from four different microorganisms (P450 terp, P450 eryF, P450 cam, and P450 BM3), another on the only mammalian P450 (2C5) structure available, and the other two based on alternative amino acid sequence alignments of 2D6 with all five of these structures. Principal component analysis suggests that inclusion of the 2C5 crystal structure has a profound effect on the modeling process, altering the general topology of the active site, and that the models produced differ significantly from all of the templates. The four models of 2D6 were also used in conjunction with molecular docking to produce complexes with the substrates codeine and 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP); this identified Glu 216 [in the F-helix; substrate recognition site (SRS) 2] as a key determinant in the binding of the basic moiety of the substrate. Our studies suggest that both Asp 301 and Glu 216 are required for metabolism of basic substrates. Furthermore, they suggest that Asp 301 (I-helix, SRS-4), a residue thought from mutagenesis studies to bind directly to the basic moiety of substrates, may play a key role in positioning the B'-C loop (SRS-1) and that the loss of activity on mutating Asp 301 may therefore be the result of an indirect effect (movement of the B'-C loop) on replacing this residue.     

Recovery of the proteose peptone component 3 from cheese whey in Reppal PES 100/polyethylene glycol aqueous two-phase systems

Recovery of the proteose peptone component 3 from cheese whey was optimal using a 16% (w/w) Reppal PES 100 – 24% (w/w) PEG 600 aqueous two-phase system, at pH 7, giving a mass recovery yield of 99% and a purity of 83% for proteose peptone component 3 in the upper phase. Using the above system a partition coefficient of 30.7 and a purification factor of 6.9 were achieved.     

Comparative effects of cytokines and cytokine combinations on complement component C3 secretion by HepG2 cells

The mechanisms that control complement protein synthesis are incompletely understood. Recent evidence suggests that cytokines are involved in the regulation of hepatic synthesis of circulating complement components. Therefore, we compared the effects of human recombinant IL-1alpha, IL-1beta, IL-6, IFN-gamma, and TNF-alpha individually or in combination, on HepG2 secretion of complement component C3, the major opsonic protein of the complement system. HepG2 cells were incubated with each cytokine alone and with various combinations of the cytokines. At 24, 48, 72, and 96 h of incubation, the C3 and albumin secreted by the HepG2 cells were quantified by a sandwich ELISA. IL-1alpha and IFN-gamma significantly enhanced C3 secretion by the cells (P<0.02 vs. control cells). IL-1beta when combined with either IL-6 or IFN-gamma also increased C3 secretion (P<0.03 vs. control cells). The stimulatory effect on HepG2 cells by the IL-1beta/IL-6 combination was synergistic. With the exception of IL-1alpha, which increased albumin secretion, HepG2 secretion of albumin was not affected by incubation with individual cytokines or the cytokine combinations. Therefore, IL-1alpha, IFN-gamma, and the combination of IL-1beta with IL-6 or IFN-gamma specifically enhanced C3 secretion by HepG2 cells. The greatest magnitude of C3 secretion was induced by the combination of IL-1beta and IL-6.     

Phenotypic biomonitoring using multivariate flow cytometric analysis of multi-stained microorganisms

A new method for monitoring phenotypic profiles of pure cultures and complex microbial communities was evaluated. The approach was to stain microorganisms with a battery of fluorescent dyes prior to flow cytometry analysis (FCM) and to analyse the data using multivariate methods, including principal component analysis and partial least squares. The FCM method was quantitatively evaluated using different mixtures of pure cultures as well as microbial communities. The results showed that the method could quantitatively and reproducibly resolve both populations and communities of microorganisms with 5% abundance in a diverse microbial background. The feasibility of monitoring complex microbial communities over time during the biodegradation of naphthalene using the FCM method was demonstrated. The biodegradation of naphthalene occurred to differing extents in microcosms representing three different types of aromatic-contaminated groundwater and a sample of bio-basin water. The FCM method distinguished each of these four microbial communities. The phenotypic profiles were compared with genotypic profiles generated by random-amplified polymorphic DNA analysis. The genotypic profiles of the microbial communities described only the microbial composition, and not their functional change, whereas the phenotypic profiles seemed to contain information on both the composition and the functional change of the microorganisms. Furthermore, event analysis of the FCM data showed that microbial communities with initially differing compositions could converge towards a similar composition if they had a capacity for high levels of degradation, whereas microbial communities with similar initial compositions could diverge if they differed in biodegrading ability.     

Identification of a two-component signal transduction system involved in fimbriation of Porphyromonas gingivalis

Porphyromonas gingivalis, a periodontopathogen, is an oral anaerobic gram-negative bacterium with numerous fimbriae on the cell surface. Fimbriae have been considered to be an important virulence factor in this organism. We analyzed the genomic DNA of transposon-induced, fimbria-deficient mutants derived from ATCC 33277 and found that seven independent mutants had transposon insertions within the same restriction fragment. Cloning and sequencing of the disrupted region from one of the mutants revealed two adjacent open reading frames (ORFs) which seemed to encode a two-component signal transduction system. We also found that six of the mutants had insertions in a gene, fimS, a homologue of the genes encoding sensor kinase, and that the insertion in the remaining one disrupted the gene immediately downstream, fimR, a homologue of the response regulator genes in other bacteria. These findings suggest that this two-component regulatory system is involved in fimbriation of P. gingivalis.     

Reuse of Electric Motors in Consumer Products

Product takeback calls for sound strategies of product recovery management One such strategy-is the reuse of the components of a product. There are consumer products such as power tools whose most expensive component, the electric motor; offers potential for reuse. Empirical evidence reveals that the lifetime of a motor often exceeds the life-time of the product using it. This article focuses on the reuse of electric motors. For this purpose, a novel circuit was developed that measures, computes, and records parameters strongly correlated with the degradation of a motor during the use stage of the product. This circuit, called electronic data log (EDL), provides valuable insights into the usage patterns of products. The data recorded during the use stage are retrieved after product takeback as a basis for reuse decisions. In this article, the trade-off between higher initial manufacturing cost caused by the EDL and cost savings from the reuse of used motors is analyzed. The problem of misclassifications of used motors is also addressed. It is shown that the return rate of used products is the critical parameter determining the economic efficiency of a motorreuse strategy based on EDLs. The analysis shows that the implementation of EDLs in products as an enabler for motor reuse may be associated with large cost savings