Stain Solubilities Part III

Ethylenediaminetetraacetic acid (EDTA) solution is used to decalcify bone specimens for histological examination. Sodium hydroxide (NaOH) has been used to dissolve EDTA and to bring EDTA solutions to neutral pH. This solution, however, requires several weeks to decalcify bone specimens. We investigated a new de-calcification fluid using concentrated ammonium hydroxide (NH₄OH) to dissolve EDTA and to adjust the pH to neutral. Decalcification was performed using a magnetic stirrer with and without vacuum, or with a sonic cleaner. Decalcification end point was confirmed using both the weight loss and X-ray methods. After decalcification, specimens were processed through paraffin and sections were stained with hematoxylin and eosin. Decalcification employing NH₄OH required an average of six days. Light microscopy indicated good retention of cellular detail.     

Influence of steam and dry heat pretreatment on fibre properties and cellulase degradation of cellulosic fibres

Cellulosic fabric samples of cotton, viscose, lyocell and modal were pretreated with steam and dry heat in the range of 100–190°C. The samples were then treated with a Trichoderma reesei cellulase preparation (total culture filtrate – TC), with mechanical agitation, at a high enzyme dosage of 75% by weight of fabric, for 8 hours. Generally, viscose proved to be easily degradable, followed by cotton and modal. The degree of hydrolysis was the least for Lyocell. Dry heat pretreatments exerted a lower influence on degradation rate than steam pretreatments which showed a distinct maximum at a steam temperature of 130°C. The hydrolysis rate varied strongly depending on treatment conditions and fibre type. Water retention values in treated substrates were changed by up to 20% of initial values.     

Finite element analysis of peri-implant bone volume affected by stresses around Morse taper implants: effects of implant positioning to the bone crest

Abstract

Objectives: The purpose of the present study was to evaluate the distribution and magnitude of stresses through the bone tissue surrounding Morse taper dental implants at different positioning relative to the bone crest. Materials and Methods: A mandibular bone model was obtained from a computed tomography scan. A three-dimensional (3D) model of Morse taper implant-abutment systems placed at the bone crest (equicrestal) and 2?mm bellow the bone crest (subcrestal) were assessed by finite element analysis (FEA). FEA was carried out on axial and oblique (45°) loading at 150 N relatively to the central axis of the implant. The von Mises stresses were analysed considering magnitude and volume of affected peri-implant bone. Results: On vertical loading, maximum von Mises stresses were recorded at 6-7?MPa for trabecular bone while values ranging from 73 up to 118?MPa were recorded for cortical bone. On oblique loading at the equiquestral or subcrestal positioning, the maximum von Mises stresses ranged from 15 to 21?MPa for trabecular bone while values at 150?MPa were recorded for the cortical bone. On vertical loading, >99.9vol.% cortical bone volume was subjected to a maximum of 2?MPa while von Mises stress values at 15?MPa were recorded for trabecular bone. On oblique loading, >99.9vol.% trabecular bone volume was subjected to maximum stress values at 5?MPa, while von Mises stress values at 35?MPa were recorded for >99.4vol.% cortical bone. Conclusions: Bone volume-based stress analysis revealed that most of the bone volume (>99% by vol) was subjected to significantly lower stress values around Morse taper implants placed at equicrestal or subcrestal positioning. Such analysis is commentary to the ordinary biomechanical assessment of dental implants concerning the stress distribution through peri-implant sites.     

Effect of environmental conditions on decomposition in eight woody species of a dry tropical forest

Litter decay is a significant part of carbon budget. Due to strong environmental control, the changes in the environment may drastically influence the litter decay rates. Litter decomposition of eight dry tropical woody species, viz. Shorea robusta, Buchanania lanzan, Diospyros melanoxylon, Lagerstroemia parviflora, Lannea coromandelica, Terminalia tomentosa, Holarrhena antidysenterica and Lantana camara was studied to document the effect of intra-annual changes in the environment. Litter decomposition was monitored at monthly intervals at five sites using litter bag technique over an annual cycle in a dry tropical deciduous forest of Vindhyan highland, India. Weight loss differed among species and through months, and ranged from 15.38% in L. camara at Kotwa site in January to 30.72% in T. tomentosa at Hathinala site in August. Peak weight loss occurred in August and averaged 46.2% across species and sites. Nitrogen and phosphorus mineralization rates also varied significantly from species to species. T. tomentosa having higher nitrogen content and lower C/N ratio than other species exhibited faster weight loss. Nitrogen and phosphorus contents of litter showed significant positive correlation with weight loss. C/N ratio was negatively related to decay constant, and the weight loss was positively related to the soil surface temperature as well as soil moisture content.     

Proteomics in translational cancer research: biomarker discovery for clinical applications

This special focus issue of Expert Review of Proteomics invites key opinion leaders to report their recent findings and views on the important topic of translating potential proteomic biomarkers to clinically useful, regulator-approved biomarkers: a challenging journey. The issue also highlights the difficulties associated with and the way forward in the discovery of proteomic cancer biomarkers for clinical applications, as well as presenting recent original research in the field.     

Assessment of the total effective xenoestrogen burden in extracts of human placentas

We have standardized a method to assess the total effective xenoestrogen burden (TEXB) in human placentas by the extraction and separation by high-performance liquid chromatography of two fractions containing lipophilic xenoestrogens (alpha) and endogenous hormones (beta), followed by assessing their estrogenicity in MCF-7 breast cancer cell-based E-Screen and Yeast Estrogen Screen (YES) bioassays. The means of TEXB alpha concentrations (in estradiol equivalent (Eeq) units) were 1.32 and 0.77 Eeq pM g^?1 placenta in the E-Screen and YES, respectively; TEXB beta concentrations were 6.97 and 11.56 Eeq pM g^?1 placenta, respectively. The interclass correlation coefficient was low and a fair level of agreement was observed after kappa test correction. According to the E-Screen and YES, TEXB alpha was ≥LOD in 70.0 and 55.0% of the placentas and 92.5 and 82.5% in beta, respectively. Although both bioassays can be recommended for assessing TEXB, there is greater experience with the use of the E-Screen for estrogenic assessment after extensive extraction of complex human matrices.     

Spatial and temporal variation in the macroinvertebrate community structure of the lower Elands River,Mpumalanga, South Africa

The Elands River, Mpumalanga, is an ecologically sensitive river that is constantly threatened by a variety of human activities. The influence of a pulp and paper mill on the river's macroinvertebrate assemblages was studied in March and June 2005, representing high- and low-flow seasons, respectively. Macroinvertebrates were collected from various biotopes using a standard sampling net, and were preserved and identified to family level. A range of multivariate and univariate statistical analyses was applied to assess the spatial and temporal variations in the macroinvertebrate communities. Diversity loss and dominance by a single taxon, Melanoides tuberculata, were noted directly below the mill. Other sites did not appear to be affected. Macroinvertebrate communities at all sites showed a strong seasonal variation.