In situ evaluation of surface roughness and micromorphology of temporary soft denture liner materials at different time intervals

Objective

To perform an in situ evaluation of surface roughness and micromorphology of two soft liner materials for dentures at different time intervals.

Background

The surface roughness of materials may influence the adhesion of micro‐organisms and inflammation of the mucosal tissues. The in situ evaluation of surface roughness and the micromorphology of soft liner materials over the course of time may present results different from those of in vitro studies, considering the constant presence of saliva and food, the changes in temperature and the pH level in the oral cavity.

Materials and methods

Forty‐eight rectangular specimens of each of the two soft liner materials were fabricated: a silicone‐based material (Mucopren Soft) and an acrylic resin‐based material (Trusoft). The specimens were placed in the dentures of 12 participants (n = 12), and the materials were evaluated for surface roughness and micromorphology at different time intervals: 0, 7, 30 and 60 days. Roughness (Ra) was evaluated by means of a roughness tester. Surface micromorphology was evaluated by scanning electron microscopy.

Results

Analysis of variance for randomised block design and Tukey's test showed that surface roughness values were lower in the groups using the silicone‐based material at all the time intervals (P < .0001). The average surface roughness was higher at time interval 0 than at the other intervals, for both materials (P < .0001). The surface micromorphology showed that the silicone material presented a more regular and smoother surface than the acrylic resin‐based material.

Conclusion

The surface roughness of acrylic resin‐based and silicone‐based denture soft liner materials decreased after 7 days of evaluation, leading to a smoother surface over time. The silicone‐based material showed lower roughness values and a smoother surface than the acrylic resin‐based material, thereby making it preferred when selecting more appropriate material, due its tendency to promote less biofilm build‐up.     

Biosynthesis and biotechnological production of degradable polyhydroxyalkanoic acid

The use of biodegradable polymers is one of the key solution to environmental problems and the development of biocompatible material. The impact of such a large commercial opportunity is one of the primary reasons for much interest in the field of microbial polyester, polyhydroxyalkanoic acid (PHA). Its valuable properties of biodegradability, biocompatibility and thermoplasticity have attracted considerable commercial interest, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] has been launched as the first market product. Recent advances in molecular genetics and microbial physiology of PHA biosynthesis have been uncovering the biosynthetic mechanics at molecular level, and extensive efforts for the developments of practical applications and cost-effective mass production of PHA will profell the commercialization of PHA towards the commodity market for biodegradable plastics. The biosynthesis of new members of PHA family with new monomer or unusual composition will also lead to the biotechnological production of tailor-made biopolymer for various applications.     

Predator–prey instability: individual-level mechanisms for population-level results

1. In previous work we established that increasing temperature led to a destabilization of the population dynamics of the invertebrate carnivore Mesostoma ehrenbergii and its prey Daphnia pulex , which ultimately resulted in the local extinction of Daphnia at higher temperatures. Two mechanisms are proposed to explain the population-level phenomena: (1) quantitative changes in carnivore vital rates with increasing temperature led to stronger functional and numerical response and (2) qualitative changes in the dynamic allocation of energy to reproduction by the predator with increasing temperature introduces inverse density dependence in the predator's response.
2. The growth of individual M. ehrenbergii was monitored under various food conditions to determine the effect of two temperatures (18 and 24 °C) and five food levels on rates of growth, prey consumption and reproduction and on reproductive allocation patterns.
3. The first mechanism was supported by both higher consumption rates (stronger functional response) and faster growth rates with earlier age at maturity and shorter generation time (stronger numerical response).
4. Evidence for mechanism two was also provided by an alteration of the reproductive allocation pattern with temperature. Viviparous (subitaneous) eggs were more likely to be produced by this carnivore at low food levels at 24 °C, while at 18 °C, high food levels were required before individuals made this switch. This shift actually introduces inverse density dependence in the predator's numerical response which is highly destabilizing.
5. Based on the results of this study, the differential effect of M. ehrenbergii on the dynamics and structure of its D. pulex prey populations can be attributed to changes in both physiological rates and reproductive allocation patterns with temperature.     

Quantifying rates of random mating in western corn rootworm emerging from Cry3Bb1‐expressing and refuge maize in field cages

The western corn rootworm (WCR), Diabrotica virgifera virgifera LeConte (Coleoptera: Chrysomelidae), is the most significant pest of field maize, Zea mays L. (Poaceae), in the USA. Maize plants expressing Bt toxins targeting the corn rootworm complex have been widely adopted and are the primary insecticidal control measure for this pest in North America. Insect resistance management tactics using various refuge structures have been adopted to ensure Bt products will retain durability. An assumption of the refuge strategy is that males and females emerging from Bt and refuge plantings mate randomly; this has not been tested in the field. We conducted cage studies using field populations of WCR in Indiana, USA, to generate empirical field data on mating rates between beetles emerging from Cry3Bb1‐expressing Bt and refuge maize plants. Two refuge configurations were tested; all refuge plants were labeled using the stable isotope ¹⁵N. This mark persists in adult beetles after eclosion, allowing for collection and analysis of isotopic ratios of all beetles. Additional data collected included adult emergence rates, timing and sex ratios for each of the treatments, and head capsule size and dry weights of beetles collected. Treatment had a significant effect on dry weight; mean dry weight decreased in Bt‐only treatments. Fisher's exact test of proportions of mating pairs of refuge and Bt insects indicated that mating was not random in 20% strip refuges and 5% seed blend treatments. We found high percentages of beetles that fed on Bt‐expressing plants as larvae, suggesting that mating between resistant beetles may not be rare even if random mating did occur.     

Resurrecting complexity: the interplay of plasticity and rapid evolution in the multiple trait response to strong changes in predation pressure in the water flea Daphnia magna

A resurrection ecology reconstruction of 14 morphological, life history and behavioural traits revealed that a natural Daphnia magna population rapidly tracked changes in fish predation by integrating phenotypic plasticity and widespread evolutionary changes both in mean trait values and in trait plasticity. Increased fish predation mainly generated rapid adaptive evolution of plasticity (especially in the presence of maladaptive ancestral plasticity) resulting in an important change in the magnitude and direction of the multivariate reaction norm. Subsequent relaxation of the fish predation pressure resulted in reversed phenotypic plasticity and mainly caused evolution of the trait means towards the ancestral pre‐fish means. Relaxation from fish predation did, however, not result in a complete reversal to the ancestral fishless multivariate phenotype. Our study emphasises that the study population rapidly tracked environmental changes through a mosaic of plasticity, evolution of trait means and evolution of plasticity to generate integrated phenotypic changes in multiple traits.     

Life Cycle Impacts of Natural Fiber Composites for Automotive Applications: Effects of Renewable Energy Content and Lightweighting

This study examines the life cycle energy demand and greenhouse gas (GHG) emissions associated with substituting natural cellulose and kenaf in place of glass fibers in automotive components. Specifically, a 30 wt% glass‐fiber composite component weighing 3 kilograms (kg) was compared to a 30 wt% cellulose fiber composite component (2.65 kg) and 40 wt% kenaf fiber composite component (2.79 kg) for six cars, crossovers, and sport utility vehicles. The use‐phase fuel consumption of the baseline and substitute components, with and without powertrain resizing, were determined using a mass‐induced fuel consumption model based on U.S. Environmental Protection Agency test records. For all vehicles, compared to the baseline glass fiber component, using the cellulose composite material reduced life cycle energy demand by 9.2% with powertrain resizing (7.2% without) and reduced life cycle GHG emissions by 18.6% with powertrain resizing (16.3% without), whereas the kenaf composite component reduced energy demand by 6.0% with powertrain resizing (4.8% without) and GHG emissions by 10.7% with powertrain resizing (9.2% without). For both natural fiber components, the majority of the life cycle energy savings is realized in the use‐phase fuel consumption as a result of the reduced weight of the component.     

Effect of solarization of soil within plastic bags on root rot of gerbera (Gerbera jamesonii L.)

Solarization of soil, (potting mix = coarse sand:Eucalyptus marginata fines = 1∶1) infested with 3 fungi pathogenic to gerbera (Phytophthora cryptogea, Fusarium oxysporum andRhizoctonia solani), for 3 to 4 weeks within transparent polyethylene bags controlled root rot of gerbera. Solarization for 2 weeks however, was less effective. All plants grown in the infested potting mix which had been kept in shade for 2, 3 or 4 weeks were severely attacked. Solarization of soil within plastic bags for 4 weeks also increased availability of nutrients such as NH₄ ⁺-N, PO₄ ⁻ and K⁺ in comparison to bagged soil kept in the shade for the same period.     

Culture of fetal mouse liver in plastic chambers: A new technique for organ culture

Summary A new technique for organ culture which uses plastic culture chambers and the advantages of the cellophane-sheet technique is described with the results of a study of cultivations of fetal mouse liver. Two chambers, each containing cells, were placed in gas permeable roller tubes and rotated at 0.1 rpm in a CO₂-air gassed incubator. The fetal mouse liver cells developed electron microscopic features similar to those of the in vivo adult liver by 9 days of cultivation. The albumin content and tyrosine aminotransferase (TAT) activity were detected in the cultivated liver. TAT activity was further induced by prednisolone. These results indicate the potential of this culture method for the study of physiological and pathological processes. This work was supported in part by a Grant-in-Aid for Cancer Research from the Ministry of Education, Science and Culture, Japan and Science Technology Agency, Japan.