不同覆膜方式对旱砂田土壤水热效应 及西瓜生长的影响

早春低温胁迫和生育期干旱胁迫是进一步提高旱砂田西瓜产量的主要限制因素。为提高旱砂田早春土壤温度和自然降水利用效率,在西北干旱区的旱砂田上开展了不同覆膜方式的对比试验,研究了全覆膜(FM)、起垄覆膜(RM)、半覆膜(HM)和不覆膜(CK)4个处理下旱砂田土壤水热效应及对西瓜产量和品质的影响。结果表明,不同覆膜方式0-25cm土壤温度日变化均以"S"的温波形式由表层向深层土壤传递,土层每加深5cm,土壤温波位相依次推移1h;不同覆膜方式0-25cm土层增温效应表现为FM>RM>HM>CK,日平均温度较CK分别提高2.8、2.0,1.8℃。FM和RM是影响旱砂田西瓜生长前期土壤水分变化的主要覆膜方式,播种至幼苗期,RM具有明显的集雨效果,抽蔓期FM具有显著的保墒效果。覆膜加快了旱砂田西瓜的生长,蔓长、叶绿素含量和叶面积指数均明显高于CK, FM、RM和HM产量分别较CK增加145.81%、99.32%和95.46%,西瓜可溶性固形物含量和可溶性糖含量均表现为FM>RM>HM>CK,而维生素C、粗纤维和有效酸含量受覆膜方式的影响较小。综合分析,FM和RM是旱砂田西瓜生产中优选的覆膜方式。     

Encapsulation of crosslinked penicillin G acylase aggregates in lentikats: evaluation of a novel biocatalyst in organic media

The encapsulation of crosslinked enzyme aggregates (CLEA) of penicillin G acylase into a very rigid polymeric matrix based on polyvinyl alcohol (LentiKats) has been used successfully to improve the inadequate mechanical properties of CLEA. This encapsulation decreased CLEA activity by only around 40%. As compensation, a significant improvement in the stability of the CLEA in the presence of organic solvents was detected. This could be related to the highly hydrophilic environment inside the LentiKats biocatalysts: Partition experiments showed that the concentration of dioxane inside LentiKats was lower than in the reaction medium. In fact, thermal stability was about the same as in the corresponding CLEA. This permitted great improvement in the reaction rate for thermodynamically controlled synthesis of a model antibiotic (using phenylacetic acid and 7-amino-deacetoxycefalosporanic acid). Even more importantly, yields could be improved by using LentiKats-encapsulated CLEA, very likely by a favorable product/substrate partition. Thus, this very simple technique not only provides an efficient technique for solving the mechanical stability problem associated with CLEA, but also greatly improves the behavior of CLEA in organic media.     

Body image and quality of life in post massive weight loss body contouring patients

Objective: Because post‐bariatric surgery patients undergo massive weight loss, the resulting skin excess can lead to both functional problems and profound dissatisfaction with appearance. Correcting skin excess could improve all these corollaries, including body image. Presently, few data are available documenting body image and weight‐related quality of life in this population. Research Methods and Procedures: Eighteen patients who underwent both bariatric surgery and body contouring completed our study. Both established surveys and new surveys designed specifically for the study were used to assess body perception and ideals, quality of life, and mood. Patients were surveyed at the following time‐points: pre‐body contouring (after massive weight loss) and both 3 and 6 month post‐body contouring. Statistical testing was performed using Student's t test and ANOVA. Results: The mean age of the patients was 46 ± 10 years (standard deviation). Quality of life improved after obesity surgery and was significantly enhanced after body contouring. Three months after body contouring, subjects ascribed thinner silhouettes to both current appearance and ideal body image. Body image also improved with body contouring surgery. Mood remained stable over 6 months. Discussion: Body contouring after surgical weight loss improved both quality‐of‐life measurements and body image. Initial body dissatisfaction did not correlate with mood. Body contouring improved body image but produced dissatisfaction with other parts of the body, suggesting that as patients become closer to their ideal, these ideals may shift. We further developed several new assessment methods that may prove useful in understanding these post‐surgical weight loss patients.     

Formulation and optimization of mouth dissolve tablets containing rofecoxib solid dispersion

The purpose of the present investigation was to increase the solubility and dissolution rate of rofecoxib by the preparation of its solid dispersion with polyvinyl pyrrolidone K30 (PVP K30) using solvent evaporation method. Drug-polymer interactions were investigated using differential scanning calorimetry (DSC), x-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). For the preparation of rofecoxib mouth dissolve tablets, its 1∶9 solid dispersion with PVP K30 was used with various disintegrants and sublimable materials. In an attempt to construct a statistical model for the prediction of disintegration time and percentage friability, a 3² randomized full and reduced factorial design was used to optimize the influence of the amounts of superdisintegrant and subliming agent. The obtained results showed that dispersion of the drug in the polymer considerably enhanced the dissolution rate. The drug-to-carrier ratio was the controlling factor for dissolution improvement. FTIR spectra revealed no chemical incompatibility between the drug and PVP K30. As indicated from XRD and DSC data, rofecoxib was in the amorphous form, which explains the better dissolution rate of the drug from its solid dispersions. Concerning the optimization study, the multiple regression analysis revealed that an optimum concentration of camphor and a higher percentage of crospovidone are required for obtaining rapidly disintegrating tablets. In conclusion, this investigation demonstrated the potential of experimental design in understanding the effect of the formulation variables on the quality of mouth dissolve tablets containing solid dispersion of a hydrophobic drug.     

‘沙田’柚果生长期套袋对果实品质的影响

‘沙田’柚果生长期进行套袋,是提高果实品质的有效措施之一。在田间生长条件下,研究了套袋对‘沙田’柚果实品质的影响。结果表明,套袋促进了柚果生长发育,提高了商品率,降低了含酸量,较明显地提高其糖酸比,并增加了维生素C的含量,从而提高了柚果品质。     

小型猪急性心肌梗死后心力衰竭模型的构建

目的应用选择性冠状动脉前降支(LAD)球囊闭塞结合微血栓微球混悬液灌注方法造成心肌缺血坏死,探索建立稳定存活的小型猪急性心肌梗死(AMI)后心力衰竭(HF)动物模型。方法选择中国五指山小型猪18头,行冠脉造影后沿血管送球囊至LAD中段,依次扩张球囊阻断前向血流1、2、5 min,每次间隔60 s,然后扩张球囊堵闭血流120 min。再以4F导管超选LAD,行微血栓微球混悬液分次注入,间隔10 min重复注射,TIMI心肌灌注分级(TMPG)2级和左室舒张末压(LVEDP)15 mm Hg时停止注射,同时监测心电图及应用漂浮导管监测有创血流动力学参数。并行pigtail导管测量(LVEDP)的变化,待LVEDP稳定在15~18 mm Hg之间后结扎血管,并加压包扎。监测心肌坏死标志物(cTnI和CK-MB)变化。分别于制模前,制模后第1天、7天、14天行心脏超声检查,制模第14天复查有创血流动力学检查,并行心脏病理检查,认定和评价模型的成功率、稳定性和可重复性。结果制模14 d后共有15头小型猪成活,心电图、心肌坏死标记物、病理检查均符合AMI病理生理过程。其中14头小型猪达到动物模型标准【肺毛细血管楔压(PCWP)18 mmHg和心输出量(CO)下降30%以上】,模型成功率为77.78%。制模后第14天PCWP明显升高(P0.01),CO平均下降50.76%;左室射血分数(LVEF)明显降低(P0.01)。病理检查显示心肌梗死面积占左心室面积的25.4%~34.9%。结论球囊闭塞结合微血栓微球混悬液灌注构建小型猪急性心肌梗死后心力衰竭模型具有闭胸、高成功率、稳定和重复性好等优点,较药物、冠状动脉结扎和起搏诱导的心力衰竭模型更接近临床病理生理学特点。     

Effects of SPLAT® GM sprayable pheromone formulation on gypsy moth mating success

Several integrated pest management programs rely on the use of mating disruption tactics to control insect pests. Some programs specifically target non‐native species, such as the gypsy moth, Lymantria dispar (L.) (Lepidoptera: Lymantriidae). We evaluated SPLAT^® GM, a new sprayable formulation of the gypsy moth sex pheromone disparlure, for its ability to disrupt gypsy moth mating. The study was conducted in 2006, 2007, and 2008 in forested areas in Virginia, USA. Mating success of gypsy moth females was reduced by >99% and male moth catches in pheromone‐baited traps by >90%, in plots treated with SPLAT^® GM at dosages ranging from 15 to 75 g of active ingredient (a.i.) ha^?1. Dosage‐response tests conducted in 2008 indicated that SPLAT^® GM applied at a dosage of 7.5 g a.i. ha^?1 was as effective as a 15 g a.i. ha^?1 dosage.     

Properties of a plasticised starch blend. Part 1: Influence of moisture content on fracture properties

The effect of moisture content on tensile and fracture properties of a plasticised starch/high molecular weight polyol blend was investigated. A wide range of mechanical behaviour was achieved by varying slightly the water uptake of this material. At low moisture content, the Young’s modulus was 3800 MPa and the yield stress, 54 MPa. When the moisture content reached 15 wt%, their values dropped, respectively, to around 1500 MPa and 21 MPa. As the material behaviour varies greatly over the moisture content range, two fracture mechanics techniques were employed: the linear elastic fracture mechanics approach to characterise brittle behaviour and the essential work of fracture method to investigate a more ductile material. At low moisture content, the measured strain energy release rate at fracture, J_Q was very low and showed little dependency on the moisture content. As the moisture content increases, the material becomes increasingly ductile and displayed a brittle-to-ductile transition at 12% of moisture content, which corresponded to the glass transition temperature of the added polyol.     

两种农作体系施肥对土壤质量的影响

不同农作体系施肥措施差异引起的土壤环境质量变化 ,会进一步影响该体系的生产力并对大气和水体环境产生潜在影响。选取中国北方两种重要的集约化种植体系 (大棚蔬菜和小麦 -玉米轮作体系 ) ,研究了经过长期施肥后 ,0～ 30 cm土壤有机质、全氮、微量元素与重金属的差异以及 0～ 90 cm土壤剖面的硝态氮、铵态氮、速效磷、速效钾、p H和电导率的变化。结果表明 ,大棚菜地氮、磷、钾化肥投入量达 N 2 82 3、P 92 8和 K 92 5 kg/(hm2 · a) ,分别为小麦 -玉米轮作农田的 4 .7、10 .1和 2 3.4倍。大棚菜地还施用了大量的有机肥。菜地土壤养分大量积累 ,尤其是硝态氮和速效磷 ,0～ 90 cm土层二者分别达 1389.8kg N/hm2和 132 1.1kg P/hm2 ,为农田的 5 .6和 8.4倍。速效钾和铵态氮累积量分别为 1817.3kg K/hm2 和 10 0 .4 kg N/hm2 ,为农田的2 .2倍和 1.8倍。同时 ,大棚菜地土壤中的养分还存在严重的淋溶现象。大棚菜地有机质、全氮和有效铁、锰、铜、锌含量分别为农田的 1.3、1.4、1.2、1.3、1.3和 1.4倍。镉含量为农田的 3.8倍。镉与土壤速效磷含量呈显著正相关 ,可见 ,磷肥的大量投入是镉在土壤中累积的主要原因。大棚菜地各层土壤 p H均明显低于农田相应土层 p H,而 0～ 30 cm和 30～ 6 0 cm土层的电导率则     

聚乳酸(PLA)生物降解的研究进展

聚乳酸(Polylactic Acid,PLA)是一种新兴的,由可再生资源--乳酸聚合而成的高分子聚酯.因为其具有优良的物理化学性能、生物相容性及生物可降解性,且对环境及人体无毒害作用,而被认为是一种最具潜力的绿色生物塑料.作为环境友好材料,聚乳酸日益受到人们的重视.基于可循环利用的考虑,其生物降解的研究也成为当前研究的一个重要方面.本文综述了PLA生物降解领域的相关进展,包括降解的微生物学、相关酶学及分子生物学,系统阐述了PLA可能的生物降解机制.并对生物系统处理PLA废弃物的可行性进行了探讨.