Freeze-preservation of buds from Scots pine trees

A procedure has been developed for freeze-preservation of buds of the Scots pine (Pinus sylvestris L.). Instead of liquid nitrogen, cold storage in –80°C was used. The partly dormant material used in the experiments was obtained directly from a natural stand in Northern Finland and no prefreezing or cryoprotectants for preconditioning were used. Cooling velocity was 1°C/min up to a terminal freezing temperature of –39°C, after which the buds were immersed in liquid nitrogen at –196°C for 10 minutes. The material was then transferred to a deepfreezer at –80°C and stored up to 6 months. After rapid thawing, the buds were sterilized and their viability was tested by FDA staining and by culturing meristems on 1/2 MS medium for at least two weeks. All the freezing experiments were performed during March and April. The best survival of buds (90–100%) was achieved at the beginning of April, after which a pronounced decline in survival occurred obviously due to a rise in the water content of the buds.     

Requirements for plant regeneration from protoplasts of the shrubby ornamental honeysuckle,Lonicera nitida cv. Maigrun

Leaf protoplasts of axenic shoot cultures of Lonicera nitida cv Maigrun underwent sustained division to give multicellular colonies (microcalli) on a modified, ammonium-free MS (Murashige & Skoog) medium containing 0.5 mg l^-1 NAA (1-naphthaleneacetic acid), 1.0 mg l^-1 BAP (6-benzylaminopurine) and 150 mg l^-1 casein enzymatic hydrolysate. Callus was produced upon transfer of cell colonies to MS medium with 2.0 mg l^-1 NAA and 0.2 mg l^-1 BAP. About 110 days from isolation protoplast-derived shoots were regenerated on a half-strength MS medium with 0.01 mg l^-1 NAA, 5.0 mg l^-1 BAP, 0.5 mg l^-1 zeatin and a complex mixture of group B vitamins. The replacement of such mixture by 250 mg l^-1 casein enzymatic hydrolysate promoted rhizogenesis in calli, with shoot buds being subsequently regenerated from the protoplast-derived roots. Micropropagation of protoplast-derived shoots (of either origin) was difficult, due to a strong apical dominance, but could be accomplished by transferring single-node explants to half-strength MS medium with 1.5 mg l^-1 BAP. Such shoots were, in turn, successfully rooted and transferred to the glasshouse where they completed acclimatization.Abbreviations BAP 6-benzylaminopurine - CPW Power et al. (1989) medium - 2,4-D 2,4-dichlorophenoxyacetic acid - FDA fluorescein diacetate - F.P.E. final plating efficiency - f.wt. fresh weight - IAA 4-indole-3yl-acetic acid - IBA 4-indole-3yl-butyric acid - I.P.E. initial plating efficiency - MES 2-N-morpholinoethane sulfonic acid - M.P.E. intermediate plating efficiency - MS Murashige & Skoog (1962) medium - NAA 1-naphthaleneacetic acid - PVP-10 polyvinylpirrolidone - Av MW 10,000, TIBA 2,3,5-tri-iodobenzoic acid - Z zeatin     

Morphogenesis in leaf,hypocotyl and root explants of Digitalis thapsi L. cultured in vitro

The effects of the auxins 2,4-D, NAA and IAA either alone or in combination with kinetin or BA were investigated to assess the morphogenetic potential of leaf, root and hypocotyl explants of Digitalis thapsi. Calluses were obtained from the three explants in basal medium without the addition of growth regulators and in leaves, the calluses formed roots. Application of 2,4-D, NAA or BA increased callus formation. The presence of NAA induced root formation and that of BA induced shoot formation via callus interphase. Indole-3-acetic acid alone only induced the generation of roots in the hypocotyl callus. Kinetin was ineffective in all the explants tested. Combinations of NAA with kinetin or BA were more effective in inducing organogenesis in leaf explants. Optimum responses were obtained in hypocotyl and root explants by using IAA in combination with BA, the highest rate of shoot regeneration being observed in hypocotyl explants.Rooting of the differentiated shoots was readily achieved in media without growth regulators. Regenerated plantlets were transferred to soil and grew with a survival rate of 70%.Abbreviations BA benzyladenine - 2,4-D 2,4-dichlorophenoxyacetic acid - IAA indoleacetic acid, Kin-kinetin - NAA naphthaleneacetic acid     

Adherence of Agrobacterium tumefaciens to the cells of immature wheat embryos

Agrobacterium attached to wheat embryos in vitro. This attachment was plasmid independent, and occurred on both wounded and unwounded cell surfaces. The pattern of attachment clearly demonstrated that bacterial attachment to cereal cells follows the same trends observed for dicotyledonous plants. During the inoculation period the bacterial cells attach to the plant cell walls either with lateral or polar orientation. Wounding (mechanical or enzymatic) preferentially promoted adherence of the bacteria at the wound site, however, attachment was not wound dependent.     

The dielectric permittivity at radio frequencies and the bruggeman probe: novel techniques for the on-line determination of biomass concentrations in plant cell cultures

A novel technique is described for the measurement of the volume fraction of biomass in a suspension by the simultaneous measurement of the conductivity of a suspension containing cells and of the medium in which the cells are suspended. The presence of non-conducting particulate matter in a suspension will cause the conductivity of a suspension to be decreased relative to that of the medium in which the particles are suspended. A simple equation (the Bruggeman equation) describes the relationship between the volume fraction of non-conducting particulate matter and the decrease in conductivity. The accuracy of this method for the determination of the biomass concentration of plant cells (Festuca arundinacea) in culture was shown. The method was successfully applied to the on-line determination of biomass concentrations during the growth of F. arundinacea cultures, and gave good agreement with biomass levels as determined from measurements of the radio-frequency dielectric permittivity of such cultures.     

In vitro culture of adult and juvenile bud explants of Passiflora species

Cultivar E23, an F1 hybrid of P. edulis and P. edulis f. flavicarpa is usually propagated by shoot-tip grafting. Various media were tested to evaluate the potential of E23 for in vitro propagation. Adult tissue was difficult to culture and did not respond to media containing low (<10 µM) concentrations of growth regulators. Growth of adult buds on intact stem sections was promoted by 1 week of dark incubation on MS basal medium plus 150 µM 2iP, 200 µM adenine sulphate and 17.1 µM IAA (3 mg l^–1), and further developed into shoots on MS medium plus 4.9 µM 2iP (1 mg l^–1) and 5.7 µM IAA (1 mg l^–1). By contrast, juvenile shoots of E23, and Passiflora species: edulis f. flavicarpa, edulis, alata, caerulea, mollissima, coccinea, herbertiana and suberosa grew rapidly on MS medium plus 10 µM kinetin and 5 µM IAA. Rapid multiplication was achieved on MS plus 20 µM BA, 10 µM kinetin, 5 µM IAA, and roots initiated on MS plus 5 µM IAA.Abbreviations IAA indole-3-acetic acid - 2iP N6-iso pentenyl adenine - BA N6-benzyl adenine     

Sex determination in cucumber (Cucumis sativus) as a model system for molecular biology

Floral biology and sex determination are reviewed in cucumber, one of the best studied monoecious plant systems. Sexual differentiation is controlled by genotypic and environmental factors. Sex conversion has been achieved by a variety of chemical treatments, some of which being extensively used for commercial purposes. Sex expression can be shifted in either direction: femaleness is promoted by ethylene, auxines and ethylene releasing compounds, while maleness is induced by gibberellins and chemicals counteracting ethylene action. Agrobacterium transformation affects, albeit rather nonspecifically, sex expression. An important collection of sex and floral mutants has been developed. The expression of sex genes has been shown to be under the control of modifier genes or the environment. Cloning strategies can take profit of the fact that sex conversion can be modulated alone or in combination by genetical, chemical and/or environmental parameters.     

Whole-embryo culture of Drosophila : development of embryonic tissues in vitro

Summary We have devised techniques to culture whole, dissected embryos of Drosophila melanogaster. We examine multiple aspects of the morphological and physiological development of the epidermis, musculature, nervous system, and internal organs in this cultured preparation, and show that in vitro development closely parallels normal embryogenesis. These techniques permit a wide range of experimental manipulations during embryogenesis and allow us to extend observations through late embryonic stages, after cuticle deposition. Applications of this technique are presented.     

Production of blastospores by three strains of metarhizium anisopliae (metch.) sorokin in submerged culture

Studies on blastospore production in different liquid media were conducted with three strains of Metarhizium anisopliae var. anisopliae (M. a.) derived from various countries (M. a. 43: Austria, M. a. 57: Brazil, M. a. 97: Philippines). Variation of six fermentation parameters (cornsteep products, carbohydrates, pH values, temperature, Tween 80, and polyethyleneglycol (PEG) 200) disclosed that the three strains of M. anisopliae differed in their growth pattern and physiology. In standard medium and in all tests, M. a. 57 produced the highest number of blastospores invariably amounting to > 10⁸ per ml, while mycelial pellets were never formed. The preferred carbohydrates were glucose and fructose. Blastospore production of M. a. 43 was increased by growth at 30°C, at pH 6.5 or by addition of 5% PEG 200. However, it was impaired by different concentrations of Tween 80 or higher concentrations of PEG 200 (10–15%). M. a. 97 produced most blastospores at 30°C, and the strain preferred basic (pH 8.0) as well as acid (pH 4.5) media. Blastospore production was increased by the addition of 5% PEG 200 or 0.4–1.2% Tween 80. Moreover, PEG 200 suppressed pellet formation effectively. Altogether, our results showed that for optimal blastospore production of Metarhizium anisopliae, suitable strain‐specific parameters have to be evaluated.     

Progress in the biotechnology of trees

An increasing world population and rise in demand for tree products, especially wood, has increased the need to produce more timber through planting more forest with improved quality stock. Superior trees are likely to arise from several sources. Firstly, forest trees can be selected from wild populations and cloned using macropropagation techniques already being investigated for fruit tree rootstocks. Alternatively, propagation might be brought aboutin vitro through micropropagation or sustained somatic embryogenesis, with encapsulation of the somatic embryos to form artificial seeds. Tree quality could be improved through increased plant breeding and it is likely that experienced gained, to date, in the breeding of fruit species will be useful in devising strategies for forest trees. Since the development of techniques to regenerate woody plants from explant tissues, cells and protoplasts, it is now feasible to test the use of tissue culture methods to bring about improvements in tree quality. Success has already been achieved for tree species in the generation of somaclonal and protoclonal variation, the formation of haploids, triploids and polyploids, somatic hybrids and cybrids and the introduction of foreign DNA through transformation. This review summarizes the advances made so far in tree biotechnology, and suggests some of the directions that it might take in the future.