Induction of protective immune response to intranasal administration of influenza virus-like particles in a mouse model

Human influenza A viruses (IAVs) cause global pandemics and epidemics, which remains a nonignorable serious concern for public health worldwide. To combat the surge of viral outbreaks, new treatments are urgently needed. Here, we design a new vaccine based on virus-like particles (VLPs) and show how intranasal administration of this vaccine triggers protective immunity, which can be exploited for the development of new therapies. H1N1 VLPs were produced in baculovirus vectors and were injected into BALB/c mice by the intramuscular (IM) or intranasal (IN) route. We found that there were significantly higher inflammatory cell and lymphocyte concentrations in bronchoalveolar lavage samples and the lungs of IN immunized mice; however, the IM group had little signs of inflammatory responses. On the basis of our results, immunization with H1N1 influenza VLP elicited a strong T cell immunity in BALB/c mice. Despite T cell immunity amplification after both IN and IM vaccination methods in mice, IN-induced T cell responses were significantly more intense than IM-induced responses, and this was likely related to an increased number of both CD11b^high and CD103⁺ dendritic cells in mice lungs after IN administration of VLP. Furthermore, evaluation of interleukin-4 and interferon gamma cytokines along with several chemokine receptors showed that VLP vaccination via IN and IM routes leads to a greater CD4⁺ Th1 and Th2 response, respectively. Our findings indicated that VLPs represent a potential strategy for the development of an effective influenza vaccine; however, employing relevant routes for vaccination can be another important part of the universal influenza vaccine puzzle.     

Use of artificial neural networks for analysis of the factors affecting particle size in mebudipine nanoemulsion

In this study, a nanoemulsion containing mebudipine [composed of ethyl oleate (oil phase), Tween 80 (T80), Span 80 (S80) (surfactants), polyethylene glycol 400, ethanol (cosurfactants), and deionized water] was prepared with the aim of improving its bioavailability for an effective antihypertensive therapy. Particle size of the formulation was measured by dynamic light scattering. Then, artificial neural networks were used in identifying factors that influence the particle size of the nanoemulsion. Three variables, namely, amount of surfactant system (T80?+?S80), amount of polyethylene glycol, and amount of ethanol as cosurfactants, were considered as input values and the particle size was used as output. The developed model showed that all the three inputs had some degrees of effect on particles size: increasing the value of each input decreased the size. Furthermore, amount of surfactant was found to be the dominant factor in controlling the final particle size of nanoemulsion.

Communicated by Ramaswamy H. Sarma     

Transduction and transfection of difficult-to-transfect cells: Systematic attempts for the transfection of protozoa Leishmania

Cell-penetrating peptides (CPPs) are used to internalize different cargoes, including DNA, into live mammalian and plant cells. Despite many cells being easily transfected with this approach, other cells are rather “difficult” or “hard to transfect,” including protist cells of the genus Leishmania. Based on our previous results in successfully internalizing proteins into Leishmania tarentolae cells, we used single CPPs and three different DNA-binding proteins to form protein-like complexes with plasmids covered with CPPs. We attempted magnetofection, electroporation, and transfection using a number of commercially available detergents. While complex formation with negatively charged DNA required substantially higher amounts of CPPs than those necessary for mostly neutral proteins, the cytotoxicity of the required amounts of CPPs and auxiliaries was thoroughly studied. We found that Leishmania cells were indeed susceptible to high concentrations of some CPPs and auxiliaries, although in a different manner compared with that for mammalian cells. The lack of successful transfections implies the necessity to accept certain general limitations regarding DNA internalization into difficult-to-transfect cells. Only electroporation allowed reproducible internalization of large and rigid plasmid DNA molecules through electrically disturbed extended membrane areas, known as permeable membrane macrodomains.     

Factors affecting the genetic engineering of plants by microprojectile bombardment

Since its development in the mid-1980s, microprojectile bombardment has been widely employed as a method for direct gene transfer into a wide range of plants, including the previously difficult-to-transform monocotyledonous species. Although the numerous instruments available for microprojectile-mediated gene delivery and their applications have been widely discussed, less attention has been paid to the critical factors which affect the efficiency of this method of gene delivery. In this review we do not wish to describe the array of devices used for microprojectile delivery or their uses which have already been definitively described, but instead wish to report on research developments investigating the factors which affect microprojectile-mediated transformation of plants.     

Mechanism of proteasome gate modulation by assembly chaperones Pba1 and Pba2

The active sites of the proteasome are housed within its central core particle (CP), a barrel-shaped chamber of four stacked heptameric rings, and access of substrates to the CP interior is mediated by gates at either axial end. These gates are constitutively closed and may be opened by the regulatory particle (RP), which binds the CP and facilitates substrate degradation. We recently showed that the heterodimeric CP assembly chaperones Pba1/2 also mediate gate opening through an unexpected structural arrangement that facilitates the insertion of the N terminus of Pba1 into the CP interior; however, the full mechanism of Pba1/2-mediated gate opening is unclear. Here, we report a detailed analysis of CP gate modulation by Pba1/2. The clustering of key residues at the interface between neighboring α-subunits is a critical feature of RP-mediated gate opening, and we find that Pba1/2 recapitulate this strategy. Unlike RP, which inserts at six α-subunit interfaces, Pba1/2 insert at only two α-subunit interfaces. Nevertheless, Pba1/2 are able to regulate six of the seven interfacial clusters, largely through direct interactions. The N terminus of Pba1 also physically interacts with the center of the gate, disrupting the intersubunit contacts that maintain the closed state. This novel mechanism of gate modulation appears to be unique to Pba1/2 and therefore likely occurs only during proteasome assembly. Our data suggest that release of Pba1/2 at the conclusion of assembly is what allows the nascent CP to assume its mature gate conformation, which is primarily closed, until activated by RP.     

Cryo-EM structures of cardiac thin filaments reveal the 3D architecture of troponin

Troponin is an essential component of striated muscle and it regulates the sliding of actomyosin system in a calcium-dependent manner. Despite its importance, the structure of troponin has been elusive due to its high structural heterogeneity. In this study, we analyzed the 3D structures of murine cardiac thin filaments using a cryo-electron microscope equipped with a Volta phase plate (VPP). Contrast enhancement by a VPP enabled us to reconstruct the entire repeat of the thin filament. We determined the orientation of troponin relative to F-actin and tropomyosin, and characterized the interactions between troponin and tropomyosin. This study provides a structural basis for understanding the molecular mechanism of actomyosin system.     

Mobility measurements of immunomagnetically labeled cells allow quantitation of secondary antibody binding amplification.

Magnetic cell separation methods commonly utilize paramagnetic materials conjugated to antibodies that target specific cell surface molecules. The amount of magnetic material bound to a cell is directly proportional to the magnetophoretic mobility of that cell. A mathematical model has been developed which characterizes the fundamental parameters controlling the amount of magnetic material bound, and thus, the magnetophoretic mobility of an immunomagnetically labeled cell. In characterization of the paramagnetic labeling, one of the parameters of interest is the increase in magnetophoretic mobility due to the secondary antibody binding to multiple epitopes on the primary antibody, referred to as the "secondary antibody binding amplification," Psi. Secondary antibody-binding amplification has been investigated and quantitated by comparing the mobilities of lymphocytes directly labeled with anti-CD4 MACS (Miltenyi Biotec, Auburn, CA) magnetic nanoparticle antibody with the mobilities of lymphocytes from the same sample labeled with two different indirect antibody-labeling schemes. Each indirect labeling scheme incorporated a primary mouse anti-CD4 FITC antibody that provides both FITC and mouse-specific binding sites for two different secondary antibody-magnetic nanoparticle conjugates: either anti-FITC MACS magnetic nanoparticle antibody or anti-mouse MACS magnetic nanoparticle antibody. The magnetophoretic mobilities of the immunomagnetically labeled cells were obtained using Cell Tracking Velocimetry (CTV). The results indicate that an average of 3.4 anti-FITC MACS magnetic nanoparticle antibodies bind to each primary CD4 FITC antibody, Psi(1,2f) = 3.4 +/- 0.33, and that approximately one, Psi(1,2m) = 0.98 +/- 0.081, anti-mouse MACS magnetic nanoparticle antibody binds to each primary mouse CD4 FITC antibody on a CD4 positive lymphocyte. These results have provided a better understanding of the antibody-binding mechanisms used in paramagnetic cell labeling for magnetic cell separation.     

Green fluorescent protein (GFP) as a marker during pollen development

The transient expression of three mutant forms of green fluorescent protein (GFP) genes, GFP4, GFP5ER, and GFP4S65C, under several constitutive and pollenspecific promoters throughout pollen development in Nicotianatabacum, thaliana and Antirrhinummajus is described. Immature pollen of tobacco, Arabidopsis and snapdragon, isolated at different developmental stages, were bombarded with plasmids containing the GFP and cultured in vitro for several days until maturity. The expression of GFP was monitored every day during in vitro maturation, germination and pollination, as well as after in situ pollination. The expression pattern of each construct was compared in parallel experiments to that of ßglucuronidase (GUS) constructs expressed by the same promoters. The results show that the expression level of all three GFP mutant forms was dependent on the strength of the promoter used. The strongest promoter was the DC3 promoter, and no notable differences in the intensity and brightness of all three versions of GFP were observed. GFPexpressing pollen from tobacco and snapdragon developed in vitro for several days until maturity and germinated in vitro as well as on the surface of stigmata, strongly suggesting that all three GFPs are not toxic for the development of functional pollen. Furthermore, stably transformed tobacco plants expressing GFP under the control of the strong pollenexpressed DC3 and LAT52 promoters were not impaired in reproductive function, confirming that GFP can be used as a nondestructive marker for plant reproductive biology and development.     

Rubber particles from four different species, examined by transmission electron microscopy and electron-paramagnetic-resonance spin labeling, are found to consist of a homogeneous rubber core enclosed by a contiguous, monolayer biomembrane

The physical characteristics of rubber particles from the four rubber (cis-1,4-polyisoprene) producing species Euphorbia lactiflua Phil., Ficus elastica Roxb., Hevea brasiliensis Müll. Arg., and Parthenium argentatum Gray, were investigated using transmission electron microscopy (TEM) and electron-paramagnetic-resonance (EPR) spin labeling spectroscopy. Transmission electron microscopy showed the rubber particles to be composed of a spherical, homogeneous, core of rubber enclosed by a contiguous, electron-dense, single-track surface layer. The biochemical composition of the surface layer and its single-track TEM suggested that a monolayer biomembrane was the surface structure most compatible with the hydrophobic rubber core. The EPR spectra for a series of positional isomers of doxyl stearic acid, used to label the surface layer of the rubber particles, exhibited flexibility gradients and evidence for lipid-protein interactions for all four rubber particle types that is consistent with a biomembrane-like surface. The EPR spectra confirmed that the surface biomembrane is a monolayer. Thus, rubber particles appear similar to oil bodies in their basic architecture. The EPR spectra also provided information on protein location and degree of biomembrane penetration that correlated with the known properties of the rubber-particle-bound proteins. The monolayer biomembrane serves as an interface between the hydrophobic rubber interior and the aqueous cytosol and prevents aggregation of the particles. An unexpected observation for the probes in pure polyisoprene was evidence of an intrinsic flexibility gradient associated with the stearic acid molecule itself. Received: 22 May 1999 / Accepted: 21 June 1999     

Genetic transformation via particle bombardment of Catharanthus roseus plants through adventitious organogenesis of buds

In vitro propagation of Catharanthus roseus was achieved using nodal explants. Bud induction was best on medium containing 1.0 mg benzyl aminopurine l^–1. Hardening of rooted shoots to soil was very successful with 98% survival. Genetically transformed C. roseus plantlets were obtained after bombardment of nodal explants, which were then micropropagated, with DNA coated particles with green fluorescent protein (GFP) or -glucuronidase (GUS) reporter genes. Histological studies showed that the gene insertion method proved effective with many cells and different tissues displaying the reporter gene signals, showing that gene expressions were rather stable.