Parametric sensitivity of stoichiometric flux balance models applied to wild-type Escherichia coli metabolism

The esterification of lauric acid with geraniol catalyzed by the commercially immobilized lipase preparation from Mucor miehei, Lipozyme(R), was studied in well-stirred flasks. The enzyme support was characterized in terms of its internal and external surface area, protein location, and protein content. It was found that the enzyme was mainly located on the external surface of the support, therefore, internal diffusional limitations were not important. It was also shown that the protein content of the support depends on the size of the particle, with smaller particles containing higher amounts of protein per unit weight. Under the conditions studied, the reaction was not under external mass transfer limitations, and the initial reaction rate depended on the size of the support particles. This was mainly due to the different protein contents on the support as a function of particle size and not to internal or external mass transfer limitations. Also, it was found that the inhibition exerted by water was predominantly a physical effect due to its accumulation around the enzyme. It was also found that the reaction was substrate inhibited by lauric acid, but not by geraniol. (c) 1995 John Wiley & Sons, Inc.     

A dynamic nonlinear optimization study of Mountain Pima subsistence technology

A dynamic nonlinear optimization analysis of subsistence patterns of the Mountain Pima of Chihuahua, Mexico, included requirements for adequate amounts of calories, calcium, vitamin A, vitamin C, and balanced protein. Two methods of incorporating nonenergy nutritional needs into a time minimization program were compared. The first was a constraint model with sharp boundaries between adequacy and fatality. The second involved multiplying the total work time by a series of nutrient indexing factors. Each factor was calculated as a function of the ratio between the recommended and actual rates of intake for all months and nutrients considered. Oxalate composition of some resources and seasonal variation in resource availability were taken into account. Two sets of data were analyzed, one for a year of adequate rainfall, the other for a year of severe drought. The predictions of the indexing model agreed more closely with observed intake patterns than did the predictions of the constraint model.     

Optimization for xylanase and cellulase production from Aspergillus niger ATTC 6275 in palm oil mill wastes and its application

Optimization of enzyme production from Aspergillus niger ATCC 6275 under both submerged and solid-substrate cultivation was investigated. Results from submerged cultivation using palm oil mill effluent revealed that pretreatment of ground palm cake did not improve enzyme production. Addition of 0.60g NH4NO3/l generated maximum activity of xylanase and cellulase (CMCase). The optimum aeration rate was 1.2 v/v min. Under solid-substrate cultivation, the results indicated that heating and alkali treatment of the ground palm cake gave no further improvement in enzyme production. The optimal N-source was 2% urea. Optimal initial moisture contents for xylanase and CMCase activities were 60% and 50% respectively, with temperature optima of 30°C and 35°C, respectively. The optimal inoculum size was 1× 108 spores/g palm cake with an initial pH of 4.5–5.0. The maximum activities of xylanase (282.9U/g) and CMCase (23.8U/g) were obtained under the optimum conditions. Solid-substrate cultivation was a better method for the production of enzyme, particularly xylanase, from A. niger ATCC 6275. The application of these enzymes to decanter effluent showed the separation of oil and grease and suspended solids from the effluent. This is comparable to the result achieved from using the commercial xylase preparation Meicelase and superior to the effect of Sumyzyme.     

Derivation and testing of pair potentials for protein folding. When is the quasichemical approximation correct?

Many existing derivations of knowledge-based statistical pair potentials invoke the quasichemical approximation to estimate the expected side-chain contact frequency if there were no amino acid pair-specific interactions. At first glance, the quasichemical approximation that treats the residues in a protein as being disconnected and expresses the side-chain contact probability as being proportional to the product of the mole fractions of the pair of residues would appear to be rather severe. To investigate the validity of this approximation, we introduce two new reference states in which no specific pair interactions between amino acids are allowed, but in which the connectivity of the protein chain is retained. The first estimates the expected number of side-chain contracts by treating the protein as a Gaussian random coil polymer. The second, more realistic reference state includes the effects of chain connectivity, secondary structure, and chain compactness by estimating the expected side-chain contrast probability by placing the sequence of interest in each member of a library of structures of comparable compactness to the native conformation. The side-chain contact maps are not allowed to readjust to the sequence of interest, i.e., the side chains cannot repack. This situation would hold rigorously if all amino acids were the same size. Both reference states effectively permit the factorization of the side-chain contact probability into sequence-dependent and structure-dependent terms. Then, because the sequence distribution of amino acids in proteins is random, the quasichemical approximation to each of these reference states is shown to be excellent. Thus, the range of validity of the quasichemical approximation is determined by the magnitude of the side-chain repacking term, which is, at present, unknown. Finally, the performance of these two sets of pair interaction potentials as well as side-chain contact fraction-based interaction scales is assessed by inverse folding tests both without and with allowing for gaps.     

How did glycogen structure evolve to satisfy the requirement for rapid mobilization of glucose? A problem of physical constraints in structure building

Optimization of molecular design in cellular metabolism is a necessary condition for guaranteeing a good structure–function relationship. We have studied this feature in the design of glycogen by means of the mathematical model previously presented that describes glycogen structure and its optimization function [Meléndez-Hevia et al. (1993), Biochem J 295: 477–483]. Our results demonstrate that the structure of cellular glycogen is in good agreement with these principles. Because the stored glucose in glycogen must be ready to be used at any phase of its synthesis or degradation, the full optimization of glycogen structure must also imply the optimization of every intermediate stage in its formation. This case can be viewed as a molecular instance of the eye problem, a classical paradigm of natural selection which states that every step in the evolutionary formation of a functional structure must be functional. The glycogen molecule has a highly optimized structure for its metabolic function, but the optimization of the full molecule has meaning and can be understood only by taking into account the optimization of each intermediate stage in its formation. Received: 23 October 1996 / Accepted: 21 April 1997     

Recent advances in plant cell cultures in bioreactors

Two key issues in the application of plant-cell-culture technology to the production of valuable secondary metabolites are reviewed: the selection of cell lines with suitable genetic, biochemical and physiological characteristics; and the optimization of bioreactor environments. Although great progress has been made in recent years in the design, selection and optimization of bioreactor hardware, optimization of environmental factors such as medium components, light irradiation and O₂ supply needs detailed investigations for each case. With a better understanding of plant cell metabolism and physiology, further developments in cultivation processes, such as process integration and on-line monitoring and control, can be expected in the near future.J.-J. Zhong and J.-T. Yu are with the Research Institute of Biochemical Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China T. Yoshida is with the International Center of Cooperative Research in Biotechnology (ICBiotech), Faculty of Engineering, Osaka University, Suita, Osaka 565, Japan.     

Germination responses of a seed population of Taraxacum officinale Weber to constant temperatures including the supra-optimal range

Abstract The germination responses of a nondormant fraction of a seed population of Taraxacum officinale Weber at constant temperatures in the range 7–34°C were analysed through a time-course study. Maximal percentage germination (approximately 90%) was attained at temperatures 10–18°C, where simple linear relationships were observed between the temperature and the germination rates, i.e. the reciprocals of the time taken to germinate by subpopulations with 20–80% germination. There was a variation in the required ‘thermal times’ (θ) which characterized the linear relationships, the distribution of which could be approximated for the seed population by the following distribution function: where m is the median of the distribution, and A is a shape parameter characterizing the pattern of the distribution. Final percentage germination decreased with increasing temperature from 20 to 32°C, where the final percentage germination vs. temperature plotted on a normal probability scale yielded a straight line, indicating the normality of the distribution of the upper limit temperature in the seed population. The estimated mean and standard deviation were 27.25 ± 3.75°C. The rate of germination for the subpopulation with 20–80% germination also decreased with increases in the temperature from 22 to 30°C. If the relationships between the temperature within this range and the rate for the subpopulations with 20–80% germination were approximated by the regression lines, the negative ‘thermal time’ characterizing the yielded linear relationship would have a distribution which could be approximated by the same function with the required thermal time for the relationship of suboptimal range. The parameters m and A for the negative ‘thermal time’ were determined to be 2870 K h and 1.7 × 10^-10 K^-3 h^-3.     

Differences in membrane unsaturated fatty acids and electron spin resonance in different types of myeloid leukemia cells

The fatty acid composition and some physical properties of intact cells and isolated plasma membranes of two types of mouse myeloid leukemia cell clone grown in culture have been examined. One clone type, MGI⁺D⁺, can be induced by the macrophage and granulocyte-inducing protein (MGI) to differentiate into mature macrophages and granulocytes. The other clone type, MGI⁺D^?, could not be induced to differentiate into mature cells. A two-fold increase in the ratio of saturated fatty acid to unsaturated fatty acid was found in the MGI⁺D^? compared to the MGI⁺D⁺ clones. The MGI⁺D^? clones produced an unusual polyunsaturated C_20:5 fatty acid at 28°C, whereas the MGI⁺D⁺ clones did not grow at this temperature. The cells and their isolated plasma membranes were studied by electron spin resonance. The motion of the 5-nitroxide stearate spin label was found to be higher in the intact cells and in the membranes of MGI⁺D^? clones than of the MGI⁺D⁺ clones. The cells of MGI⁺D⁺ clones showed a similar freedom of motion to normal myeloblasts from the bone marrow. The results indicate that myeloid leukemia cells which differ in their competence to be induced to differentiate into mature cells have different physical properties of their plasma membranes and that this is correlated with their fatty acid acyl chain composition.