Interpretation of sedimentation data measured in a former tidal channel Lake Volkerak

In Lake Volkerak, situated in the southwest of the Netherlands, downward settling fluxes are related to external inputs of suspended solids and wind action. The settling fluxes, measured using sediment traps, were 55 g (dw) m ^–2 d ^–1 on average. The ratio of metal concentration to scandium concentration was used to discriminate between external (polluted) suspended solids and internal (relatively clean) suspended solids. Generally, the contribution of the river suspended solids was small compared to that of resuspended material; the river-transported material was mainly deposited in the centre and to the east of the lake. The amount of material trapped increased substantially with increasing wind velocity.A simple model was used to interpretate the data. This model does not have a predictive capacity, but can be used to interpret and assess the significance of material retained in the sediment traps. Erosion was related to the wind velocity, using an empirical relationship between the orbital velocity of the wind-generated waves at the bottom and the wind velocity. The critical wind velocity for erosion to occur was estimated to be 5.5 m s^–1. The extremely high amounts retained in the sediment traps in shallow areas during storms emphasised the importance of these wind conditions for the transport of fine sediments.     

Biomaterials as carrier,barrier and reactor for cell-based regenerative medicine

Cell therapy has achieved tremendous success in regenerative medicine in the past several decades. However, challenges such as cell loss, death and immune-rejection after transplantation still persist. Biomaterials have been designed as carriers to deliver cells to desirable region for local tissue regeneration; as barriers to protect transplanted cells from host immune attack; or as reactors to stimulate host cell recruitment, homing and differentiation. With the assistance of biomaterials, improvement in treatment efficiency has been demonstrated in numerous animal models of degenerative diseases compared with routine free cell-based therapy. Emerging clinical applications of biomaterial assisted cell therapies further highlight their great promise in regenerative therapy and even cure for complex diseases, which have been failed to realize by conventional therapeutic approaches.     

Patterns of DNA and chromosome variation during in vitro growth in various genotypes of potato

Patterns of variation in nuclear DNA content and chromosome number were analysed in a temporal sequence, during in vitro growth of calli and cell suspensions in two monohaploids, a dihaploid and a tetraploid of potato (Solanum tuberosum). The results showed that both polyploidization and aneuploidy occurred during the initial stages of callus induction in all the genotypes. With further growth of callus, the frequency and extent of polyploidy and aneuploidy increased. In addition, the patterns of DNA and chromosome variation in cell suspension cultures revealed continued mitotic activity and transmission of cells with higher ploidy levels and aneuploidy. The results suggest that endoreduplication as well as endomitosis are important mechanisms of polyploidization, and that chromosome lagging and non-disjunction contribute to the production of aneuploidy.The various genotypes cultured under the same in vitro growth conditions differed in genetic instability, as assessed from the rate and degree of polyploidization and aneuploidy. Monohaploids showed more rapid rate of polyploidization than the dihaploid and tetraploid potatoes. It was concluded that the differences in genetic stability were due to different ploidy levels and genetic make-up of the genotypes.     

Immobilized biocatalytic process development and potential application in membrane separation: a review

Biocatalytic membrane reactors have been widely used in different industries including food, fine chemicals, biological, biomedical, pharmaceuticals, environmental treatment and so on. This article gives an overview of the different immobilized enzymatic processes and their advantages over the conventional chemical catalysts. The application of a membrane bioreactor (MBR) reduces the energy consumption, and system size, in line with process intensification. The performances of MBR are considerably influenced by substrate concentration, immobilized matrix material, types of immobilization and the type of reactor. Advantages of a membrane associated bioreactor over a free-enzyme biochemical reaction, and a packed bed reactor are, large surface area of immobilization matrix, reuse of enzymes, better product recovery along with heterogeneous reactions, and continuous operation of the reactor. The present research work highlights immobilization techniques, reactor setup, enzyme stability under immobilized conditions, the hydrodynamics of MBR, and its application, particularly, in the field of sugar, starch, drinks, milk, pharmaceutical industries and energy generation.     

Transport and settlement of organic matter in small streams

1. After it enters streams, terrestrially derived organic matter (OM) rapidly absorbs water. Using field and laboratory experiments, we examined how this process affected the buoyancy, settling velocity, transport distance and retention locations of four types of organic matter typically found in Pacific coastal streams (‘flexible’ red alder leaves and three ‘stiff’ particle types – Douglas‐fir needles, red cedar fronds and Douglas‐fir branch pieces). 2. Immersion in water rapidly changed the physical characteristics of alder leaves, Douglas‐fir needles and red cedar fronds, which all reached constant still‐water settling velocities after only a few days of soaking. In contrast, the settling velocity of branch pieces continued to increase for 13 days, eventually reaching much higher values than any other OM type. Dried alder leaves became negatively buoyant after only two days of immersion, while other types took substantially longer (up to 24 days) before the specific gravity of all particles was >1. 3. We released saturated OM particles in an experimental channel and found that all particle types travelled further in a fast, shallow ‘riffle’ than a slow, deep ‘pool’. Comparisons with a passive settlement null model indicated that leaves were retained more rapidly than expected in the riffle (by large protruding stones), while the three stiff particle types travelled further than expected (probably due to turbulent suspension) and were retained when they settled in deeper water between larger stones. In pools, passive settlement appeared to dominate the retention of all OM types, with leaves travelling furthest. 4. These retention patterns corresponded well with those observed when saturated OM particles collected in the field were released in two pools and two riffles in a second‐order coastal stream. 5. When the experimental channel and in‐stream data were combined, the retention rates of the three stiff OM types were closely related to calculated Rouse numbers (Rouse number = particle settling velocity/shear velocity), whereas the retention rate of alder leaves was not. This suggests that different physical mechanisms are responsible for the retention of leaves and stiff OM types in shallow streams.     

大鼠下丘脑室旁核与终纹床核及前额叶皮质间纤维联系的研究

分别注射辣根过氧化物酶（HRP）入大鼠的PVN和BNST,用组织化学的方法在确定注射部位准确的情况下,在PVN、BNST及PFC观察被标记的神经元或轴突末梢,探讨大鼠下丘脑室旁核（PVN）与终纹床核（BNST）及前额叶皮质间（PFC）之间是否存在投射通路;将HRP注射到PVN后,在同侧的BNST见标记的细胞体,在PFC未见标记的细胞体或轴突末梢;将HRP注射到BNST后,在同侧的PVN见标记的轴突末梢,在PFC未见标记的细胞体或轴突末梢。大鼠BNST有神经纤维投射到PVN,PFC与PVN及BNST之间没有直接的或只有极少量的纤维联系,在机体面临威胁性情境时,BNST可能激活HPA轴引发生理和行为反应,PFC是否通过与PVN或BNST的直接或间接的纤维投射实现其调节功能值得关注。     

Performance of a new family of modular,bed-supported,chromatography devices

Prepacked chromatography columns and cassette filtration units offer many advantages in bioprocessing. These include reduced labor costs and processing times, ease of storage, and enhanced process flexibility. Rectangular formats are particularly attractive as they can be easily stacked and multiplexed together for continuous processing. Cylindrical chromatography beds have dominated bioprocessing even though their bed support and pressure-flow performance vary with bed dimensions. This work presents the performance of novel, rhombohedral chromatography devices with internally supported beds. They are compatible with existing chromatography workstations and can be packed with any standard commercial resin. The devices offer pressure-flow characteristics independent of container-volume, simple multiplexing, and separation performance comparable to cylindrical columns. Their bi-planar, internal bed support allows mechanically less-rigid resins to be used at up to four times higher maximal linear velocities, and productivities approaching 200 g/L/h for affinity resins, compared to the 20 g/L/h typical of many column-based devices. Three 5 L devices should allow processing of up to 3 kg of monoclonal antibody per hour.     

Development of a three-zone simulated moving bed process based on partial-discard strategy for continuous separation of valine from isoleucine with high purity,high yield,and high product concentration

The issue of separating valine from isoleucine has been a major concern in the biotechnological process for production of valine. To address this issue, an optimal three-zone simulated moving bed (SMB) process for continuous separation of valine was developed in this study. It was first found that an Amberchrom-CG161C resin was highly suitable for the adsorbent of such SMB process. The adsorption isotherm and mass-transfer parameters of valine and isoleucine on the Amberchrom-CG161C adsorbent were then determined through multiple frontal experiments. The determined parameters were used in the next stage of optimizing the SMB for valine separation, which was performed on the basis of genetic algorithm. For the optimized SMB process, a partial-discard strategy was applied to the raffinate port in order to make a further improvement in the valine product concentration. Finally, the optimized SMB based on the partial-discard strategy was tested experimentally using the self-assembled SMB equipment. The experimental results showed that the developed process in this study was highly effective in continuous separation of valine from isoleucine while ensuring the attainment of high product concentration. The experimental data for the SMB effluent histories and the SMB column profiles were also in close agreement with the model predictions.     

Influences of Woody Debris on Flow Patterns and Channel Morphology in a Low Energy,Sand‐Bed Stream Reach

In lowland areas, such as the glacial landscapes of eastern Germany, sand‐bed streams are the most common stream type. They have low gradients and their hydrological regime is often subdued due to the frequent interruption by lakes. Very few is known about the influence of woody debris in these streams, since nearly all previous studies are from high‐gradient conditions, where streams have coarse bed sediments and harsh hydrological regimes. The research objectives of this study were first to assess the quasi‐natural quantity and quality of wood in a lowland sand‐bed stream and second to understand the influence of wood on the channel morphology and the flow patterns at base‐flow. The three‐dimensional stream bed relief was surveyed by electronic distance measurement. The position and the size of large woody debris was assessed by close‐up photography. An acoustic Doppler velocimeter was used to record the patterns of flow velocity and turbulence. Overlay and analysis of the spatial data was done using a Geographic Information System. The standing stock of wood was 1.9 m³ and 39 woody elements per 100 m² of stream bed. The flow pattern was clearly controlled by the wood. Woody elements elevated above the stream bed deflected flow and locally caused strong secondary current, high turbulence, and scour of the stream bed at baseflow. Wood resting directly on the stream bed, which contributed the majority of the wood inside the bank‐full channel, determined the roughness of the stream bed. Near‐bed flow patterns observed were isolated roughness flow and wake interference flow, which was registered inside the accumulations of wood. 68% of the stream bed had shear stress above critical. Hence, the secondary morphological structures of the sand‐bed were controlled at base‐flow by the flow which was determined by the woody debris distribution.     

C2360, a nuclear protein expressed in human proliferative cytotrophoblasts, is a representative member of a novel protein family with a conserved coiled coil-helix-coiled coil-helix domain

In this study, we describe the identification of nine novel genes isolated from a unique human first-trimester cDNA library generated from the placental bed. One of these clones, called C2360 and located on chromosome 10q22, was selected as it showed restricted expression in placental bed tissue as well as in JEG3 choriocarcinoma cells with absent expression in adult tissues. We show that the expression is restricted to first-trimester proliferative trophoblasts of the proximal column and show that C2360 is a nuclear protein. No detectable transactivation potential was observed for different domains of the protein. Secondary structure prediction showed that C2360 is a representative member of a eukaryotic family of proteins with a low conservation at the amino acid level, but with strong conservation at the structural level, sharing the general domain (coiled coil 1)-(helix 1)-(coiled coil 2)-(helix 2), or CHCH domain. Each alpha-helix within this domain contains two cysteine amino acids, and these intrahelical cysteines are separated by nine amino acids (C-X(9)-C motif). The fixed position within each helix indicated that both helices could form a hairpin structure stabilized by two interhelical disulfide bonds. Other proteins belonging to the family include estrogen-induced gene 2 and the ethanol-induced 6 protein. The conserved motif was found in yeast, plant, Drosophila, Caenorhabditis elegans, mouse, and human proteins, indicating that the ancestor of this protein family is of eukaryotic origin. These results indicate that C2360 is a representative member of a multifamily of proteins, sharing a protein domain that is conserved in eukaryotes.