Optimization of fetal lung organ culture for surfractant biosynthesis

Summary Lung organ culture has been a widely used system for studying differentiation and maturation of alveolar epithelium through various culture conditions. The purpose of this work was to carefully characterize in vitro lung biochemical diffeentiation through isolation of surfactant fraction from tissue and to search for optimal culture conditions. Fetal rat lung was explanted on the 18th gestational day for studying glycogen storage, and on the 20th gestational day for studying surfactant accretion, and cultivated for 48 h. Morphologic differentiation was studies byelectron microscopy tissue explanted on the 17th or 18th gestational days and cultivated for various times. Glycogen storage was greater on fluid medium, although less than occurring in vivo. Cellular integrity and surfactant accumulation were maximal on a semisolid medium containing 0.5% agar. Use of O₂-CO₂ instead of air-CO₂ for gassing the explants slighlty decreased phospholipid accumulation. Among media used in previous lung culture studies, Waymouth MB 752/1 was the only one to allow net glycogen accumulation in vitro. The most favorable media for surfactant phospholipid accretion were Waymouth MB 752/1, Eagle’s minimum essential and its Dulbeccco’s modification, CMRL 1066, and NCTC 109. They allowed a 12- to 14-fold increase of surfactant fraction phospholipids in vitro, which is similar to the increase occurring in vivo during the same peiod. Ham’s F10 and F12 media allowed a six fold increase. RPMI 1640 and medium 199 (M199) allowed only a three fold increase. Phospholipid concentration in nonsurfactant fraction only doubled during culture, and differences between various media were much less marked. DNA concentration changed little during culture. Morphologic differentiation of epithelial cells was advanced as compared with in vivo timing in a medium allowing maximal surfactant accretion (Waymouth MB 752/1) but not in a medium allowing low surfactant increase (RPMI 1640). The possible role of compositional differences between media is discussed.     

Microstructure and dynamic surface properties of surfactant protein SP-B/dipalmitoylphosphatidylcholine interfacial films spread from lipid-protein bilayers

 Suspensions of dipalmitoylphosphatidylcholine (DPPC) bilayers containing 5, 10 or 20% (w/w) surfactant protein SP-B have been reconstituted and spread at air-liquid interfaces. Compression isotherms of DPPC/SP-B monolayers spread from these preparations were qualitatively comparable to the isotherms of the corresponding DPPC/SP-B monolayers spread from solvents. SP-B was squeezed-out at higher pressures from vesicle-spread films than from solvent-spread monolayers. SP-B caused a marked decrease on the rate of relaxation of DPPC collapse phases to equilibrium pressures in all the lipid/protein films assayed. This stabilizing effect was higher in vesicle-spread than in solvent-spread monolayers. Inclusion in the films of traces of the fluorescent probe NBD-PC (1 mol%) and use of a fluorescent derivative of SP-B labeled with a rhodamine derivative, Texas Red, allowed for direct observation of protein and lipid domains at the interface by epifluorescence microscopy. Upon compression, SP-B altered the packing of phospholipids in the bilayer-spread films, observed as a SP-B-induced reduction of the area of liquid-condensed domains, in a way similar to its effect in solvent-spread monolayers. SP-B was not associated with condensed regions of the films. Fluorescence images from vesicle-spread films showed discrete fluorescent aggregates that could be consistent with the existence of lipid-protein vesicles in close association with the monolayer. Both the retention of SP-B at higher surface pressures and the greater stability of collapse phases of DPPC/SP-B films prepared by spreading from liposomes in comparison to those spread from solvents can be interpreted as a consequence of formation of complex bilayer-monolayer interacting systems. Received: 1 December 1999 / Revised version: 2 March 2000 / Accepted: 2 March 2000     

Method for determining the best hydrophilic-lipophilic balance (HLB) number for a compatible non-ionic surfactant in formulation development for aerial conidia of Metarhizium anisopliae (Hypocreales: Clavicipitaceae)

A direct dropping method was developed to determine the best hydrophilic-lipophilic balance number of Metarhizium anisopliae conidia at different water content levels during dehydration. Results showed the best HLB number of the tested M. anisopliae conidia was 8; dehydration did not change the best HLB number but significantly increased wetting time.     

Surfactant-induced breakthrough effects during the operation of two-phase biocatalytic membrane reactors

Surface-active components, both reactants and products, are frequently encountered in two-phase, aqueous-organic, biocatalytic reactions, When such reaction are carried out in a membrane reactor, employing a membrane selectively wetted by one of the two reactants, changes in the content of these surfactants- as a consequence of the progress of the reaction-can lead to wetting transitions at the two membrane-liquid interfaces as a result of adsorption of the tenside. This can lead to a decrease in the pressure required to cause the, initially, nonwetting phase to break through the membrane. Such effects render difficult the operation of two-phase membrane bioreactors. Hence, it is necessary to make a careful selection of the membrane material and type by considering factors such as UF versus MF and low MWCO versus high MWCO to enable the reactor to be operated without breakthrough, but without significantly compromising the reaction rates that can be maintained.The phenomena leading to breakthrough effects are discussed in this paper, and experimental results for the hydrolysis of ethyl laurate by lipase from Candida rugosa in a batch flat sheet membrane reactor are presented with the reactor operated with a variety of membranes. An experimental result showing the decrease in the pressure required to cause breakthrough of the organic phase (for the system ethyl laurate-lauric acid-water) as the content of the highly surface-active lauric acid in the organic phase is increased is also presented for an asymmetric, hydrophilic meta-aramid ultrafiltration membrane. (c) 1994 John Wiley & Sons, Inc.     

Surfactant phospholipid metabolism

Pulmonary surfactant is essential for life and is composed of a complex lipoprotein-like mixture that lines the inner surface of the lung to prevent alveolar collapse at the end of expiration. The molecular composition of surfactant depends on highly integrated and regulated processes involving its biosynthesis, remodeling, degradation, and intracellular trafficking. Despite its multicomponent composition, the study of surfactant phospholipid metabolism has focused on two predominant components, disaturated phosphatidylcholine that confers surface-tension lowering activities, and phosphatidylglycerol, recently implicated in innate immune defense. Future studies providing a better understanding of the molecular control and physiological relevance of minor surfactant lipid components are needed. This article is part of a Special Issue entitled Phospholipids and Phospholipid Metabolism.     

Effect of surfactant protein A on the physical properties and surface activity of KL4-surfactant

SP-A, the major protein component of pulmonary surfactant, is absent in exogenous surfactants currently used in clinical practice. However, it is thought that therapeutic properties of natural surfactants improve after enrichment with SP-A. The objective of this study was to determine SP-A effects on physical properties and surface activity of a new synthetic lung surfactant based on a cationic and hydrophobic 21-residue peptide KLLLLKLLLLKLLLLKLLLLK, KL(4). We have analyzed the interaction of SP-A with liposomes consisting of DPPC/POPG/PA (28:9:5.6, w/w/w) with and without 0.57 mol % KL(4) peptide. We found that SP-A had a concentration-dependent effect on the surface activity of KL(4)-DPPC/POPG/PA membranes but not on that of an animal-derived LES. The surface activity of KL(4)-surfactant significantly improved after enrichment with 2.5-5 wt % SP-A. However, it worsened at SP-A concentrations > or =10 wt %. This was due to the fluidizing effect of supraphysiological SP-A concentrations on KL(4)-DPPC/POPG/PA membranes as determined by fluorescence anisotropy measurements, calorimetric studies, and confocal fluorescence microscopy of GUVs. High SP-A concentrations caused disappearance of the solid/fluid phase coexistence of KL(4)-surfactant, suggesting that phase coexistence might be important for the surface adsorption process.     

Mesenchymal control of branching pattern in the fetal mouse lung

The effect of mesenchyme on specialization of respiratory epithelium in the fetal mouse was tested in organ cultures. Heterologous combinations were made between respiratory and non-respiratory lung epithelia and the corresponding mesenchymes. Isolated terminal respiratory buds of fetal mouse lungs were recombined with mesenchyme from chick lung parabronchi, mouse trachea or from the avascular, non-respiratory air sacs of chick lungs. Isolated non-branching chick air sacs were combined with mouse terminal bud mesenchyme or mesenchyme from the respiratory branches of chick lungs. Air sac epithelia branched in a pattern characteristic of the chick lung when combined with chick respiratory mesenchyme and in a pattern characteristic of mouse lung when combined with mouse terminal bud mesenchyme. Mouse terminal bud epithelia did not branch with either mouse tracheal mesenchyme or chick air sac mesenchyme but branched in a chick pattern with chick parabronchial mesenchyme. Electron microscopic examination of the cultures showed that all chick air sac epithelial cultures failed to produce surfactant (lamellar bodies) even when they branched. Control cultures of mouse terminal buds contained large numbers of lamellar bodies; mesenchyme which suppressed branching reduced the number of lamellar bodies to only a few in a small proportion of the cells. Culture medium supplemented with growth factors and hormones increased the number of lamellar bodies in heterologous mouse combinations but did not bring the number to control levels. Supplemented medium had no effect on lamellar body production by chick air sac epithelium. The results indicate that branching pattern is determined by the mesenchyme surrounding the epithelial primordium. However, the capacity to synthesize surfactant is determined by the source of the epithelium; mesenchyme may control the degree of expression but not the absolute presence or absence of the differentiated condition.     

Marine bacterioplankton can increase evaporation and gas transfer by metabolizing insoluble surfactants from the air–seawater interface

Hydrophobic surfactants at the air–sea interface can retard evaporative and gaseous exchange between the atmosphere and the ocean. While numerous studies have examined the metabolic role of bacterioneuston at the air–sea interface, the interactions between hydrophobic surfactants and bacterioplankton are not well constrained. A novel experimental design was developed, using Vibrio natriegens and ³H-labelled hexadecanoic acid tracer, to determine how the bacterial metabolism of fatty acids affects evaporative fluxes. In abiotic systems, >92% of the added hexadecanoic acid remained at the air–water interface. In contrast, the presence of V. natriegens cells draws down insoluble hexadecanoic acid from the air–water interface as an exponential function of time. The exponents characterizing the removal of hexadecanoic acid from the interface co-vary with the concentration of V. natriegens cells in the underlying water, with the largest exponent corresponding to the highest cell abundance. Radiochemical budgets show that evaporative fluxes from the system are linearly proportional to the quantity of hexadecanoic acid at the interface. Thus, bacterioplankton could influence the rate of evaporation and gas transfer in the ocean through the metabolism of otherwise insoluble surfactants.     

Modification of heavy metal uptake efficiency by modified chitosan/anionic surfactant systems

The presence of toxic heavy metals in natural environments entails a potential health hazard for humans. Metal contaminants in these environments are usually tightly bound to colloidal particles and organic matter. On the other hand, the potential of these metals towards chelation by different chelating agents presents a good characteristic for their removal from the environment. On this basis, two chitosan/anionic surfactant complexes were prepared and evaluated for their ability to remove heavy metals from aqueous solutions. The experimental results of the uptake of metal ions including Cu²⁺, Sn²⁺, Co²⁺ and Ni²⁺ are reported in this study. The results show that modified chitosan with short‐spacer group cross‐linkers has a higher potential for heavy metal uptake than long‐chain cross‐linker‐modified chitosan. Also, increasing the electronegativity of the heavy metals increases their uptake from the medium. Increasing the time of exposure of the heavy metals to the modified polymer increases the efficiency of the metal uptake process.     

Response of Solenopsis invicta (Hymenoptera: Formicidae) to potassium oleate water solution

Abstract In contrast to floating on the surface of distilled water, ants were immediately submerged after being placed in the potassium oleate (PO) water solution, which led to immobilization within minutes. However, some workers survived after being immersed in 0.03% PO water solution at 25°C for up to 640 min. Elevated temperature of the PO water solution is needed to kill ants within a shorter time frame. At 50°C and 0.13% PO concentration, total mortality was achieved with 10-min immersion for all ants, including brood and adult ants. Soil has a negative effect on the effectiveness of potassium oleate; however, such negative effect can be overcome by increasing either treatment temperature or duration of the treatment. In addition to immobilizing and lethal effect, PO repels ants. PO may have the potential to be incorporated into immersion treatment for the quarantine of imported fire ants to reduce the use of synthetic contact insecticides.