Structural flexibility and the positive charges are the key factors in bacterial cell selectivity and membrane penetration of peptoid-substituted analog of Piscidin 1

Piscidin 1 (Pis-1) is a novel cytotoxic peptide with a cationic α-helical structure isolated from the mast cells of hybrid striped bass. In our previous study, we showed that Pis-1[PG] with a substitution of Pro⁸ for Gly⁸ in Pis-1 had higher bacterial cell selectivity than Pis-1. We designed peptoid residue-substituted peptide, Pis-1[NkG], in which Gly⁸ of Pis-1 was replaced with Nlys (Lys peptoid residue). Pis-1[NkG] had higher antibacterial activity and lower cytotoxicity against mammalian cells than Pis-1 and Pis-1[PG]. We determined the tertiary structure of Pis-1[PG] and Pis-1[NkG] in the presence of DPC micelles by NMR spectroscopy. Both peptides had a three-turn helix in the C-terminal region and a bent structure in the center. Pis-1[PG] has a rigid bent structure at Pro⁸ whereas Pis-1[NkG] existed as a dynamic equilibrium of two conformers with a flexible hinge structure at Nlys⁸. Depolarization of the membrane potential of Staphylococcus aureus and confocal laser-scanning microscopy study revealed that Pis-1[NkG] effectively penetrated the bacterial cell membrane and accumulated in the cytoplasm, whereas Pis-1[PG] did not penetrate the membrane but remained outside or on the cell surface. Introduction of a lysine peptoid at position 8 of Pis-1 provided conformational flexibility and increased the positive charge at the hinge region; both factors facilitated penetration of the bacterial cell membrane and conferred bacterial cell selectivity on Pis-1[NkG].     

Photoconsumption of molecular oxygen on both donor and acceptor sides of photosystem II in Mn-depleted subchloroplast membrane fragments

Oxygen consumption in Mn-depleted photosystem II (PSII) preparations under continuous and pulsed illumination is investigated. It is shown that removal of manganese from the water-oxidizing complex (WOC) by high pH treatment leads to a 6-fold increase in the rate of O₂ photoconsumption. The use of exogenous electron acceptors and donors to PSII shows that in Mn-depleted PSII preparations along with the well-known effect of O₂ photoreduction on the acceptor side of PSII, there is light-induced O₂ consumption on the donor side of PSII (nearly 30% and 70%, respectively). It is suggested that the light-induced O₂ uptake on the donor side of PSII is related to interaction of O₂ with radicals produced by photooxidation of organic molecules. The study of flash-induced O₂ uptake finds that removal of Mn from the WOC leads to O₂ photoconsumption with maximum in the first flash, and its yield is comparable with the yield of O₂ evolution on the third flash measured in the PSII samples before Mn removal. The flash-induced O₂ uptake is drastically (by a factor of 1.8) activated by catalytic concentration (5-10 μM, corresponding to 2-4 Mn per RC) of Mn²⁺, while at higher concentrations (> 100 μM) Mn²⁺ inhibits the O₂ photoconsumption (like other electron donors: ferrocyanide and diphenylcarbazide). Inhibitory pre-illumination of the Mn-depleted PSII preparations (resulting in the loss of electron donation from Mn²⁺) leads to both suppression of flash-induced O₂ uptake and disappearance of the Mn-induced activation of the O₂ photoconsumption. We assume that the light-induced O₂ uptake in Mn-depleted PSII preparations may reflect not only the negative processes leading to photoinhibition but also possible participation of O₂ or its reactive forms in the formation of the inorganic core of the WOC.     

Cryptochrome 3 from Arabidopsis thaliana: structural and functional analysis of its complex with a folate light antenna

Cryptochromes are almost ubiquitous blue-light receptors and act in several species as central components of the circadian clock. Despite being evolutionary and structurally related with DNA photolyases, a class of light-driven DNA-repair enzymes, and having similar cofactor compositions, cryptochromes lack DNA-repair activity. Cryptochrome 3 from the plant Arabidopsis thaliana belongs to the DASH-type subfamily. Its crystal structure determined at 1.9 Angstroms resolution shows cryptochrome 3 in a dimeric state with the antenna cofactor 5,10-methenyltetrahydrofolate (MTHF) bound in a distance of 15.2 Angstroms to the U-shaped FAD chromophore. Spectroscopic studies on a mutant where a residue crucial for MTHF-binding, E149, was replaced by site-directed mutagenesis demonstrate that MTHF acts in cryptochrome 3 as a functional antenna for the photoreduction of FAD.     

Co-composting of hair waste from the tanning industry with de-inking and municipal wastewater sludges

Production of waste hair in the leather manufacturing industry is increasing every year due to the adoption of hair-save unhairing techniques, leaving the tanners with the problem of coping with yet another solid by-product. Numerous potential strategies for hair utilisation have been proposed. However, the use of hair waste as agricultural fertiliser is one of its most promising applications due to the high nitrogen content of hair. Agricultural value of hair can be increased by composting. This paper deals with the composting of hair from the unhairing of bovine hide. Results indicated that hair cannot be either composted on its own or co-composted with de-inking sludge, a chemical complementary co-substrate. However, good results were obtained when co-composted with raw sludge from a municipal wastewater treatment plant at hair:raw sludge weight ratios 1:1, 1:2 and, 1:4 in lab scale and pilot plant scale composters. In all cases, a more stable product was achieved at the end of the process. Composting in the pilot plant composter was effectively monitored using Static Respiration Indices determined at process temperature at sampling (SRI _T ) and at 37°C (SRI₃₇). Notably, SRI _T values were more sensitive to changes in the biological activity. In contrast, Respiratory Quotient (RQ) values were not adequate to follow the development of the process.     

Empirical isotropic chemical shift surfaces

A list of proteins is given for which spatial structures, with a resolution better than 2.5 A, are known from entries in the Protein Data Bank (PDB) and isotropic chemical shift (ICS) values are known from the RefDB database related to the Biological Magnetic Resonance Bank (BMRB) database. The structures chosen provide, with unknown uncertainties, dihedral angles phi and psi characterizing the backbone structure of the residues. The joint use of experimental ICSs of the same residues within the proteins, again with mostly unknown uncertainties, and ab initio ICS(phi,psi) surfaces obtained for the model peptides For-(L-Ala)(n)-NH(2), with n = 1, 3, and 5, resulted in so-called empirical ICS(phi,psi) surfaces for all major nuclei of the 20 naturally occurring alpha-amino acids. Out of the many empirical surfaces determined, it is the 13C(alpha)-1H(alpha) ICS(phi,psi) surface which seems to be most promising for identifying major secondary structure types, alpha-helix, beta-strand, left-handed helix (alpha(D)), and polyproline-II. Detailed tests suggest that Ala is a good model for many naturally occurring alpha-amino acids. Two-dimensional empirical 13C(alpha)-1H(alpha) ICS(phi,psi) correlation plots, obtained so far only from computations on small peptide models, suggest the utility of the experimental information contained therein and thus they should provide useful constraints for structure determinations of proteins.     

Allosteric sites can be identified based on the residue–residue interaction energy difference

Allosteric drugs act at a distance to regulate protein functions. They have several advantages over conventional orthosteric drugs, including diverse regulation types and fewer side effects. However, the rational design of allosteric ligands remains a challenge, especially when it comes to the identification allosteric binding sites. As the binding of allosteric ligands may induce changes in the pattern of residue–residue interactions, we calculated the residue–residue interaction energies within the allosteric site based on the molecular mechanics generalized Born surface area energy decomposition scheme. Using a dataset of 17 allosteric proteins with structural data for both the apo and the ligand‐bound state available, we used conformational ensembles generated by molecular dynamics simulations to compute the differences in the residue–residue interaction energies in known allosteric sites from both states. For all the known sites, distinct interaction energy differences (>25%) were observed. We then used CAVITY, a binding site detection program to identify novel putative allosteric sites in the same proteins. This yielded a total of 31 “druggable binding sites,” of which 21 exhibited >25% difference in residue interaction energies, and were hence predicted as novel allosteric sites. Three of the predicted allosteric sites were supported by recent experimental studies. All the predicted sites may serve as novel allosteric sites for allosteric ligand design. Our study provides a computational method for identifying novel allosteric sites for allosteric drug design. Proteins 2015; 83:1375–1384. © 2014 Wiley Periodicals, Inc.     

Comparison of the carbon-sequestering abilities of pineapple leaf residue chars produced by controlled combustion and by field burning

This study was undertaken to compare the chemical properties and yields of pineapple leaf residue (PLR) char produced by field burning (CF) with that produced by a partial combustion of air-dried PLR at 340 °C for 3 h in a furnace (CL). Higher total C, lignin content, and yield from CL as well as the presence of aromatic compounds in the Fourier Transform Infrared spectra of the char produced from CL suggest that the CL process was better in sequestering C than was the CF process. Although the C/N ratio of char produced from CL was low indicating a high N content of the char, the C in the char produced from CL was dominated by lignin suggesting that the decomposition of char produced from CL would be slow. To sequester C by char application, the PLR should be combusted in a controlled process rather than by burning in the field.     

Microscopic structure and properties changes of cassava stillage residue pretreated by mechanical activation

This study has focused on the pretreatment of cassava stillage residue (CSR) by mechanical activation (MA) using a self-designed stirring ball mill. The changes in surface morphology, functional groups and crystalline structure of pretreated CSR were examined by using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) under reasonable conditions. The results showed that MA could significantly damage the crystal structure of CSR, resulting in the variation of surface morphology, the increase of amorphous region ratio and hydrogen bond energy, and the decrease in crystallinity and crystalline size. But no new functional groups generated during milling, and the crystal type of cellulose in CSR still belonged to cellulose I after MA.     

Effect of using suboptimal alignments in template-based protein structure prediction

Computational protein structure prediction remains a challenging task in protein bioinformatics. In the recent years, the importance of template-based structure prediction is increasing because of the growing number of protein structures solved by the structural genomics projects. To capitalize the significant efforts and investments paid on the structural genomics projects, it is urgent to establish effective ways to use the solved structures as templates by developing methods for exploiting remotely related proteins that cannot be simply identified by homology. In this work, we examine the effect of using suboptimal alignments in template-based protein structure prediction. We showed that suboptimal alignments are often more accurate than the optimal one, and such accurate suboptimal alignments can occur even at a very low rank of the alignment score. Suboptimal alignments contain a significant number of correct amino acid residue contacts. Moreover, suboptimal alignments can improve template-based models when used as input to Modeller. Finally, we use suboptimal alignments for handling a contact potential in a probabilistic way in a threading program, SUPRB. The probabilistic contacts strategy outperforms the partly thawed approach, which only uses the optimal alignment in defining residue contacts, and also the re-ranking strategy, which uses the contact potential in re-ranking alignments. The comparison with existing methods in the template-recognition test shows that SUPRB is very competitive and outperforms existing methods.