Assessment of survival during starvation ofEscherichia coli andKlebsiella pneumoniae in artificial urine: analysis of the kinetics of colony formation

A kinetic model of colony formation was proposed by Hattori, based on a count of the colonies that appear on a plate in successive short intervals of time. In this model, three parameters (,t _r and N) are defined, which reflect the ability of a bacterium to yield colonies and allow us to described the dynamics of bacterial populations in soil and ofE. coli at different growth phases. In this paper we report a reparametrization of the kinetic model of colony formation, with the aim of facilitating more accurate calculation of andt _r. Moreover, we observed that during the starvation ofE. coli andK. pneumoniae in urine, can be used to assess survival, since this parameter clearly decreases during starvation. Retardation time values (t _r) were similar inE. coli andK. pneumoniae throughout the starvation experimental period.     

The effects of membrane lipid order and cholesterol on the internal and external cationic sites of the Na+−K+ pump in erythrocytes

Cholesterol depletion alters the apparent affinity of the internal cationic sites and the maximal translocation rate but not the affinity of the external cationic sites of the $\text{Na}{}^{\mathrm{+}}\text{?K}{}^{\mathrm{+}}$ pump in human erythrocytes. To test whether these effects were mediated by a direct cholesterol-internal site interaction or by a change in membrane lipid order, the effects of five fluidizing amphiphiles (chlorpromazine, imipramine, benzyl alcohol, sodium oleate and sodium benzenesulphonate) on the kinetic parameters of the $\text{Na}{}^{\mathrm{+}}\text{?K}{}^{\mathrm{+}}$ pump were determined. The cholesterol removal and all the agents used induced dose-response decreases in membrane lipid order as measured by fluorescence polarization or ESR. Positive and neutral amphiphiles mimicked the effects of cholesterol removal on the affinity of the internal sites of the pump and to a lesser extent on the maximal translocation rate. Anionic amphiphiles had no effect on internal sites, probably because they distributed preferentially within the outer leaflet on the membrane. These results indicate that cholesterol controls the affinity of the internal sites of the $\text{Na}{}^{\mathrm{+}}\text{?K}{}^{\mathrm{+}}$ pump by altering the membrane lipid order. In contrast, neither cholesterol depletion nor the agents used altered the affinity of the external sites of the $\text{Na}{}^{\mathrm{+}}\text{?K}{}^{\mathrm{+}}$ pump. This difference in sensitivity to membrane lipid order suggests that internal and external cationic sites, although borne by the same protein, are in different lipid environments.     

不同灌水量下限对高羊茅绿期及抗寒性生理指标的影响

采用盆栽试验的方法,研究了秋末冬初不同灌水量下限\[分别占田间持水量(FC)的80%、70%、60%、50%\]对高羊茅绿期及抗寒性生理指标的影响.结果表明：在冬季低温条件下,80%和70%FC灌水处理使高羊茅叶片相对含水量、保护酶(SOD、POD和CAT)活性、叶绿素、可溶性糖和游离脯氨酸含量维持在较高水平,丙二醛含量和电解质外渗率降低,高羊茅的抗寒性增强.80%FC灌水处理分别较70%、60%和50%FC处理的草坪草绿期延长4、22和28 d,到达枯黄休眠的时间最晚,完成返青的时间最早.综合考虑节水和提高水分利用效率等多种因素,70%FC灌水处理为高羊茅秋末冬初季节最佳的灌水下限.     

青海祁连瑞香狼毒的光谱差异特征提取

瑞香狼毒是分布在青海省高寒草甸的主要毒害草之一,近年来其迅速蔓延对当地畜牧业危害严重并使草地生态系统日趋退化.在海北州祁连县选取狼毒分布的典型退化草甸,采用2012—2014年狼毒盛花期获取的实测光谱数据,分析狼毒与牧草的光谱差异性.结果表明： 在350~900 nm的可见光 近红外波段,狼毒顶花的光谱反射特征明显异于狼毒叶片和同期牧草等绿色背景,顶花与绿色背景的光谱反射率差异主要体现在红谷和蓝谷.随着盖度的增加,狼毒群落光谱反射率整体升高,在近红外反射峰处狼毒群落与牧草群落光谱反射率具有最大差值,且不同盖度狼毒群落之间的差异性最明显.顶花与绿色背景以及狼毒群落与牧草群落的一阶导数光谱差异均体现在黄边幅值和蓝边幅值.狼毒群落盖度与光谱特征参量的线性回归分析表明,红谷与狼毒群落盖度的相关性最好(R²=0.94),反演狼毒群落盖度的精度最高.盛花期区分狼毒与牧草的主要光谱特征参量为红谷、蓝谷与近红外反射峰,其对应的红、蓝及近红外波段的组合可用于构建狼毒提取的敏感指数.     

Technical viability of the production,partial purification and characterisation of inulinase using pretreated agroindustrial residues

The present work aimed to study the viability of the use of sugarcane molasses and corn steep liquor (CSL) in a sequential inulinase production performing an up-stream pretreatment of these agroindustrial residues. A sequential strategy was used applying three central composite rotatable designs (CCRDs) to optimise medium composition, followed by a down-stream step. The medium containing 150 g L⁻¹ molasses, 50 g L⁻¹ CSL and 6 g L⁻¹ yeast extract, yielded a maximum inulinase production of 1,294 ± 7 U mL⁻¹, after 72 h of fermentation. A down-stream evaluation was carried out using an expanded bed of Streamline DAE resin (Pharmacia), with and without the up-stream treatment. The results showed that the enzyme could not be recovered from the non-pretreated medium, whereas a yield of 91% was obtained in the adsorption stage from the medium prepared with the up-stream treatment, showing the viability of producing the enzyme inulinase from agroindustrial residues using the integrated process.     

Ephemeroptera,Plecoptera, and Trichoptera on Isle Royale National Park,USA, compared to mainland species pool and size distribution

Extensive sampling for aquatic insects was conducted in the orders Ephemeroptera (mayflies), Plecoptera (stoneflies), and Trichoptera (caddisflies) (EPT) of Isle Royale National Park (ISRO), Michigan, United States of America, during summer 2013. The island was ice covered until 8,000 to 10,000 years ago and is isolated by 22–70 km distance from the mainland. Two hypotheses were examined: that ISRO EPT richness would be much reduced from the mainland, and that the species colonizing ISRO would be of smaller size than mainland, adults presumably using updrafts to bridge the distance from mainland sources. Data sets were developed for known mainland EPT species and size for those species. The first hypothesis was confirmed with the mainland species pool consisting of 417 EPT, while ISRO is known to support 73 species. Richness of EPT is directly related to the number of specimens examined. Small streams supported five EPT species, while 15–25 species were found in larger streams. Lakeshores had intermediate diversity. The second hypothesis was substantiated for stoneflies, but not for mayflies or caddisflies. Stoneflies apparently are poorer fliers than either of the other two orders.     

Cell membrane fluidity related to electroporation and resealing

In this paper, we report the results of a systematic attempt to relate the intrinsic plasma membrane fluidity of three different cell lines to their electroporation behaviour, which consists of reversible and irreversible electroporation. Apart from electroporation behaviour of given cell lines the time course required for membrane resealing was determined in order to distinguish the effect of resealing time from the cell’s ability to survive given electric pulse parameters. Reversible, irreversible electroporation and membrane resealing were then related to cell membrane fluidity as determined by electron paramagnetic resonance spectroscopy and computer characterization of membrane domains. We found that cell membrane fluidity does not have significant effect on reversible electroporation although there is a tendency for the voltage required for reversible electroporation to increase with increased membrane fluidity. Cell membrane fluidity, however, may affect irreversible electroporation. Nevertheless, this effect, if present, is masked with different time courses of membrane resealing found for the different cell lines studied. The time course of cell membrane resealing itself could be related to the cell’s ability to survive.     

Modeling late entry bias in survival analysis

In a failure time analysis, we sometimes observe additional study subjects who enter during the study period. These late entries are treated as left-truncated data in the statistical literature. However, with real data, there is a substantial possibility that the delayed entries may have extremely different hazards compared to the other standard subjects. We focus on a situation in which such entry bias might arise in the analysis of survival data. The purpose of the present article is to develop an appropriate methodology for making inference about data including late entries. We construct a model that includes parameters for the effect of delayed entry bias having no specification for the distribution of entry time. We also discuss likelihood inference based on this model and derive the asymptotic behavior of estimates. A simulation study is conducted for a finite sample size in order to compare the analysis results using our method with those using the standard method, where independence between entry time and failure time is assumed. We apply this method to mortality analysis among atomic bomb survivors defined in a geographical study region.     

Validation of density–elasticity relationships for finite element modeling of human pelvic bone by modal analysis

In total hip arthroplasty and particularly in revision surgery, computer assisted pre-operative prediction of the best possible anchorage strategy for implant fixation would be a great help to the surgeon. Computer simulation relies on validated numerical models. In the current study, three density–elasticity relationships (No. 1–3) from the literature for inhomogeneous material parameter assignment from CT data in automated finite element (FE) modeling of long bones were evaluated for their suitability for FE modeling of human pelvic bone. Numerical modal analysis was conducted on 10 FE models of hemipelvic bone specimens and compared to the gold standard provided by experimental modal analysis results from a previous in-vitro study on the same specimens. Overall, calculated resonance frequencies came out lower than measured values. Magnitude of mean relative deviation of numerical resonance frequencies with regard to measured values is lowest for the density–elasticity relationship No. 3 (−15.9%) and considerably higher for both density–elasticity relationships No. 1 (−41.1%) and No. 2 (−45.0%). Mean MAC values over all specimens amount to 77.8% (No. 1), 78.5% (No. 2), and 83.0% (No. 3). MAC results show, that mode shapes are only slightly influenced by material distribution. Calculated resonance frequencies are generally lower than measured values, which indicates, that numerical models lack stiffness. Even when using the best suited (No. 3) out of three investigated density–elasticity relationships, in FE modeling of pelvic bone a considerable underestimation of model stiffness has to be taken into account.