Life cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study

Three‐dimensional (3D) printing and geo‐polymers are two environmentally oriented innovations in concrete manufacturing. The 3D printing of concrete components aims to reduce raw material consumption and waste generation. Geo‐polymer is being developed to replace ordinary Portland cement and reduce the carbon footprint of the binder in the concrete. The environmental performance of the combined use of the two innovations is evaluated through an ex‐ante life cycle assessment (LCA). First, an attributional LCA was implemented, using data collected from the manufacturer to identify the hotspots for environmental improvements. Then, scaled‐up scenarios were built in collaboration with the company stakeholder. These scenarios were compared with the existing production system to understand the potential advantages/disadvantages of the innovative system and to identify the potential directions for improvement. The results indicate that 3D printing can potentially lead to waste reduction. However, depending on its recipe, geo‐polymer likely has higher environmental impacts than ordinary concrete. The ex‐ante LCA suggests that after step‐by‐step improvements in the production and transportation of raw materials, 3D printing geo‐polymer concrete is able to reduce the carbon footprint of concrete components, while it does still perform worse on impact categories, such as depletion of abiotic resources and stratospheric ozone depletion. We found that the most effective way to lower the environmental impacts of 3D concrete is to reduce silicate in the recipe of the geo‐polymer. This approach is, however, challenging to realize by the company due to the locked‐in effect of the previous innovation investment. The case study shows that to support technological innovation ex‐ante LCA has to be implemented as early as possible in innovation to allow for maintaining technical flexibility and improving on the identified hotspots.     

In Situ Formation of MoO3 in PEDOT:PSS Matrix: A Facile Way to Produce a Smooth and Less Hygroscopic Hole Transport Layer for Highly Stable Polymer Bulk Heterojunction Solar Cells

A solution‐processed neutral hole transport layer is developed by in situ formation of MoO₃ in aqueous PEDOT:PSS dispersion (MoO₃‐PEDOT:PSS). This MoO₃‐PEDOT:PSS composite film takes advantage of both the highly conductive PEDOT:PSS and the ambient conditions stability of MoO₃; consequently it possesses a smooth surface and considerably reduced hygroscopicity. The resulting bulk heterojunction polymer solar cells (BHJ PSC) based on poly[2,3‐bis‐(3‐octyloxyphenyl)quinoxaline‐5,8‐diyl‐alt‐thiophene‐2,5‐diyl] (TQ1):[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₀BM) blends using MoO₃‐PEDOT:PSS composite film as hole transport layer (HTL) show considerable improvement in power conversion efficiency (PCE), from 5.5% to 6.4%, compared with the reference pristine PEDOT:PSS‐based device. More importantly, the device with MoO₃‐PEDOT:PSS HTL shows considerably improved stability, with the PCE remaining at 80% of its original value when stored in ambient air in the dark for 10 days. In comparison, the reference solar cell with PEDOT:PSS layer shows complete failure within 10 days. This MoO₃‐PEDOT:PSS implies the potential for low‐cost roll‐to‐roll fabrication of high‐efficiency polymer solar cells with long‐term stability at ambient conditions.     

Use of superabsorbent polymer gels for surface decontamination of Bacillus anthracis spores

Aims:  This study evaluated the inactivation of Bacillus anthracis Vollum spores dried on a nonporous surface using a superabsorbent polymer (SAP) gel containing commercially available liquid decontaminants.
Methods and Results:  The first phase determining the availability of the liquid decontaminant within the SAP showed that the SAP gel containing pH-adjusted sodium hypochlorite (NaOCl) inhibited B. anthracis growth while the water control SAP gel had no affect on growth. For testing surface decontamination, B. anthracis spores were dried onto steel coupons painted with chemical agent resistant coating and exposed to SAP containing either pH-adjusted NaOCl, chlorine dioxide (ClO₂) or hydrogen peroxide/peracetic acid (H₂O₂/PA) for 5 and 30 min. At contact times of both 5 and 30 min, all of the SAP gels containing pH-adjusted NaOCl, ClO₂ or H₂O₂/PA inactivated B. anthracis spores at levels ranging from 2·2 to ≥7·6 log reductions.
Conclusions:  Incorporation of three commercially available decontaminant technologies into a SAP gel promotes inactivation of B. anthracis spores without observable physical damage to the test surface.
Significance and Impact of the Study:  This work provides preliminary data for the feasibility of using SAP in inactivating B. anthracis spores on a nonporous surface, supporting the potential use of SAP in surface decontamination.     

Isolation and partial characterization of the ADP-ribosylated nuclear proteins from Ehrlich ascites tumor cells

The (ADP-ribose)_n protein conjugates formed by incubation of Ehrlich ascites tumor cell nuclei with 1 mM (³H)NAD were isolated by chromatography on boronate cellulose columns with a yield of >85%. Possible contamination by glycoproteins was excluded by rechromatography after specific release of the (ADP-ribose)_n residues from their acceptors. Dodecyl sulfate gel electrophoresis revealed numerous protein bands which coincided with the (³H)ADP-ribose bands obtained by fluorography of the gels. 40% of the acceptor proteins were identified as the nucleosomal core histones. Most of these histones, however, appeared in the non-histone fraction because of extensive modification by poly(ADP-ribose). Drastic changes in properties were also seen in the true non-histone proteins which comprised 60% of the total conjugated protein. Besides several prominent acceptor proteins (M_r = 12,000; 31,000; 125,000) numerous proteins were detected indicating a considerable heterogeneity of non-histone acceptors.     

Evaluating the potential of thermal read‐out techniques combined with molecularly imprinted polymers for the sensing of low‐weight organic molecules

In recent years, there has been a tremendous increase in the papers published on synthetic recognition elements. Molecularly imprinted polymers (MIPs), also referred to as “man‐made mimics” of antibodies, are able to rebind their template molecules with high affinity. Advantages compared with those of natural receptors include their excellent thermal and chemical stability, low cost, and ease of the production process. However, their use in commercial biosensors is limited owing to the difficulty to incorporate MIPs into suitable sensing platforms and traditional detection techniques, such as chromatography, that require bulky and sophisticated equipment. In this review, we evaluate the potential to use MIPs combined with thermal read‐out for the detection of low‐weight organic molecules. We discuss thermal methods to study MIP‐template complexation and to determine neurotransmitters concentrations. In particular, we highlight the heat‐transfer method, a recent technique that is straightforward and low cost and requires minimal instrumentation. Until now, sample preparation involves a 2‐step process, making it time‐consuming, and measuring biological samples is difficult owing to the noise in the signal. Different sample preparation methods are discussed, and it will be demonstrated how this affects the thermal response. An outlook is given in novel methods that can simplify and speed up sample preparation. Finally, we show a novel thermal technique, which is based on the analysis of transport of thermal waves rather than evaluating the fixed heat‐transfer resistance. Through applying the concept of thermal waves, signal‐noise ratio is significantly increased, which results in lower detection limits and has potential for the study of biological samples.     

Adenoviral BMP-2 gene transfer in mesenchymal stem cells: in vitro and in vivo bone formation on biodegradable polymer scaffolds

The aim of this study was to determine the feasibility of adenoviral gene transfer into primary human bone marrow osteoprogenitor cells in combination with biodegradeable scaffolds to tissue-engineer bone. Osteoprogenitors were infected with AxCAOBMP-2, a vector carrying the human BMP-2 gene. Alkaline phosphatase activity was induced in C2C12 cells following culture with conditioned media from BMP-2 expressing cells, confirming successful secretion of active BMP-2. Expression of alkaline phosphatase activity, type I collagen and mineralisation confirmed bone cell differentiation and maintenance of the osteoblast phenotype in extended culture for up to 6 weeks on PLGA porous scaffolds. In vivo implantation of adenoviral osteoprogenitor constructs on PLGA biodegradeable scaffolds, using diffusion chambers, also demonstrated bone cell differentiation and production of bone tissue. The maintenance of the osteoblast phenotype in extended culture and generation of mineralised 3-D scaffolds containing such constructs indicate the potential of such bone tissue engineering approaches in bone repair.     

A modified method for isolating poly(vinyl alcohol)-degrading bacteria and study of their degradation patterns

An addition of catalase or peroxidase into an agar plate containing poly(vinyl alcohol) (PVA), was effective for the isolation of PVA-degrading microorganisms. A Gram-negative bacterium, strain TK-2 (-group of proteobacteria), rapidly degraded a high molecular weight PVA to low molecular weight material after 1 day thereby producing oligomers of PVA as shown by gel permeation chromatography. Conversely, Sphingomonas strain TJ-7 did not produce any PVA oligomers, suggesting that the strain TJ-7 degraded PVA from the terminal ends of the molecules, whereas the strain TK-2 cleaved PVA at random.     

Solid Polymer Electrolytes with Enhanced Electrochemical Stability for High-Capacity Aluminum Batteries

Chloroaluminate ionic liquids are commonly used electrolytes in rechargeable aluminum batteries due to their ability to reversibly electrodeposit aluminum at room temperature. Progress in aluminum batteries is currently hindered by the limited electrochemical stability, corrosivity, and moisture sensitivity of these ionic liquids. Here, a solid polymer electrolyte based on 1-ethyl-3-methylimidazolium chloride-aluminum chloride, polyethylene oxide, and fumed silica is developed, exhibiting increased electrochemical stability over the ionic liquid while maintaining a high ionic conductivity of ≈13 mS cm⁻¹. In aluminum–graphite cells, the solid polymer electrolytes enable charging to 2.8 V, achieving a maximum specific capacity of 194 mA h g⁻¹ at 66 mA g⁻¹. Long-term cycling at 2.7 V showed a reversible capacity of 123 mA h g⁻¹ at 360 mA g⁻¹ and 98.4% coulombic efficiency after 1000 cycles. Solid-state nuclear magnetic resonance spectroscopy measurements reveal the formation of five-coordinate aluminum species that crosslink the polymer network to enable a high ionic liquid loading in the solid electrolyte. This study provides new insights into the molecular-level design and understanding of polymer electrolytes for high-capacity aluminum batteries with extended potential limits.     

Biocatalyzed approach for the surface functionalization of poly(L‐lactic acid) films using hydrolytic enzymes

Poly(lactic acid) as a biodegradable thermoplastic polyester has received increasing attention. This renewable polyester has found applications in a wide range of products such as food packaging, textiles and biomedical devices. Its major drawbacks are poor toughness, slow degradation rate and lack of reactive side‐chain groups. An enzymatic process for the grafting of carboxylic acids onto the surface of poly(L‐lactic acid) (PLLA) films was developed using Candida antarctica lipase B as a catalyst. Enzymatic hydrolysis of the PLLA film using Humicola insolens cutinase in order to increase the number of hydroxyl and carboxylic groups on the outer polymer chains for grafting was also assessed and showed a change of water contact angle from 74.6 to 33.1° while the roughness and waviness were an order of magnitude higher in comparison to the blank. Surface functionalization was demonstrated using two different techniques, ¹⁴C‐radiochemical analysis and X‐ray photoelectron spectroscopy (XPS) using ¹⁴C‐butyric acid sodium salt and 4,4,4‐trifluorobutyric acid as model molecules, respectively. XPS analysis showed that 4,4,4‐trifluorobutyric acid was enzymatically coupled based on an increase of the fluor content from 0.19 to 0.40%. The presented ¹⁴C‐radiochemical analyses are consistent with the XPS data indicating the potential of enzymatic functionalization in different reaction conditions.     

Macromolecular crowding effects on the kinetics of opposing reactions catalyzed by alcohol dehydrogenase

In order to better understand how the complex, densely packed, heterogeneous milieu of a cell influences enzyme kinetics, we exposed opposing reactions catalyzed by yeast alcohol dehydrogenase (YADH) to both synthetic and protein crowders ranging from 10 to 550 kDa. The results reveal that the effects from macromolecular crowding depend on the direction of the reaction. The presence of the synthetic polymers, Ficoll and dextran, decrease V_max and K_m for ethanol oxidation. In contrast, these crowders have little effect or even increase these kinetic parameters for acetaldehyde reduction. This increase in V_max is likely due to excluded volume effects, which are partially counteracted by viscosity hindering release of the NAD⁺ product. Macromolecular crowding is further complicated by the presence of a depletion layer in solutions of dextran larger than YADH, which diminishes the hindrance from viscosity. The disparate effects from 25 g/L dextran or glucose compared to 25 g/L Ficoll or sucrose reveals that soft interactions must also be considered. Data from binary mixtures of glucose, dextran, and Ficoll support this “tuning” of opposing factors. While macromolecular crowding was originally proposed to influence proteins mainly through excluded volume effects, this work compliments the growing body of evidence revealing that other factors, such as preferential hydration, chemical interactions, and the presence of a depletion layer also contribute to the overall effect of crowding.