An optimization study of carotenoid production by Rhodotorula glutinis DBVPG 3853 from substrates containing concentrated rectified grape must as the sole carbohydrate source

A multivariate statistical approach was employed for the optimization of conditions for carotenoid production by Rhodotorula glutinis DBVPG 3853 from a substrate containing concentrated rectified grape must as the sole carbohydrate source. Several experimental parameters (carbohydrate, yeast autolysate and salt concentrations, and pH) were tested at two levels by following a fractional factorial design. Carotenogenesis was most sensitive to both initial pH and yeast autolysate concentration. A Central Composite Design experiment was then performed by obtaining both second-order polynomial models and isoresponse diagrams where initial pH and yeast autolysate concentration were considered as variables. In this way it was possible to determine the conditions (pH = 5.78, yeast autolysate = 4.67 g L⁻¹) which maximize both the concentration of total carotenoids and that of β-carotene (6.9 mg L⁻¹ and 1100 μg L⁻¹ of culture fluid, respectively, after 120 h of fermentation). Journal of Industrial Microbiology & Biotechnology (2000) 24, 41–45. Received 23 February 1999/ Accepted in revised form 14 September 1999     

Efficacy of silver-releasing rubber for the prevention of Pseudomonas aeruginosa biofilm formation in water

Abstract

The aim of the present study was to evaluate the efficacy of Elastoguard? silver-releasing rubber in preventing Pseudomonas aeruginosa biofilm formation in water. Biofilm formation by P. aeruginosa under various conditions in an in vitro model system was compared for silver-releasing and conventional rubber. Under most conditions tested, the numbers of sessile cells attached to silver-releasing rubber were considerably lower with reference to conventional rubber, although the effect diminished with increasing volumes. The release of silver also resulted in a decrease in planktonic cells. By exposing both materials simultaneously to conditions for biofilm growth, it became obvious that the antibiofilm effect was due to a reduction in the number of planktonic cells, rather than to contact-dependent killing of sessile cells. The data demonstrate that the use of silver-releasing rubber reduces P. aeruginosa biofilm in water and reduces the number of planktonic cells present in the surrounding solution.     

水稻分蘖的分子机理研究进展

分蘖是水稻等禾谷类作物生产的关键农艺性状,也是单子叶植物一种特殊的分枝现象.水稻分蘖的形成是一个复杂的过程,其间受遗传、植物激素、栽培环境等因素的综合影响.近年来,对水稻分蘖数改变的突变体研究取得令人瞩目的研究成果,本综述总结水稻分蘖的调控机理的最新研究进展.     

Chemical disinfection of high-consequence transboundary animal disease viruses on nonporous surfaces

Disinfection is a critical part of the response to transboundary animal disease virus (TADV) outbreaks by inactivating viruses on fomites to help control infection. To model the inactivation of TADV on fomites, we tested selected chemicals to inactivate Foot and Mouth Disease virus (FMDV), African Swine Fever virus (ASFV), and Classical Swine Fever virus (CSFV) dried on steel and plastic surfaces. For each of these viruses, we observed a 2 to 3 log reduction of infectivity due to drying alone. We applied a modified surface disinfection method to determine the efficacy of selected disinfectants to inactivate surface-dried high-titer stocks of these three structurally different TADV. ASFV and FMDV were susceptible to sodium hypochlorite (500 and 1000 ppm, respectively) and citric acid (1%) resulting in complete disinfection. Sodium carbonate (4%), while able to reduce FMDV infectivity by greater than 4-log units, only reduced ASFV by 3 logs. Citric acid (2%) did not totally inactivate dried CSFV, suggesting it may not be completely effective for disinfection in the field. Based on these data we recommend disinfectants be formulated with a minimum of 1000 ppm sodium hypochlorite for ASFV and CSFV disinfection, and a minimum of 1% citric acid for FMDV disinfection.     

Comparison of the Efficacy of Free Residual Chlorine and Monochloramine against Biofilms in Model and Full Scale Cooling Towers

The presence of microbial cells on surfaces results in the formation of biofilms, which may also give rise to microbiologically influenced corrosion. Biofilms accumulate on all submerged industrial and environmental surfaces. The efficacy of disinfectants is usually evaluated using planktonic cultures, which often leads to an underestimate of the concentration required to control a biofilm. The aim of this study was to investigate the efficacy of monochloramine on biofilms developed in a cooling tower. The disinfectants selected for the study were commercial formulations recommended for controlling microbial growth in cooling towers. A cooling tower and a laboratory model recirculating water system were used as biofilm reactors. Although previous studies have evaluated the efficacy of free chlorine and monochloramine for controlling biofilm growth, there is a lack of published data concerning the use monochloramine in cooling towers. Stainless steel coupons were inserted in each tower basin for a period of 30 d before removal. Monochloramine and free chlorine were tested under identical conditions on mixed biofilms which had been allowed to grow on coupons. Monochloramine was found to be significantly more effective than free chlorine against cooling tower biofilms.     

Effect of ultrasound and addition of bacterial product on hydrolysis of by-products from the meat-processing industry

The hydrolysis efficiency of ultrasound (US) and bacterial product (BP; Liquid Certizyme 5™) was studied as a pre-treatment for anaerobic digestion (AD) of four animal by-products (ABP) from the meat-processing industry (digestive tract content + drumsieve waste, dissolved air flotation (DAF) sludge, grease trap sludge and the mixture of these). The change in volatile solids (VS) based hydrolysis parameters was screened using different specific US energy (Es) inputs (1000-14,000 kJ/kg of total solids (TS)) and durations of BP treatment (3-48 h). The Es of 6000-8500 kJ/kg TS increased most extensively the soluble chemical oxygen demand (COD_sol) and VS ratio, by 45-290%, and soluble nitrogen (N_sol) by 44-99%. Simultaneously, the average particle size (APS) decreased by 45-75%, from the original value. With BP, the highest increases in COD_sol/VS (29-130%), N_sol (35-63%) and decline in APS (40-70%) depended on the raw material (digestive tract content + drumsieve waste: 3 and 24 h; DAF sludge: 3 and 6 h, mixture: 12 and 48 h). BP apparently was more effective at hydrolyzing smaller cellulose particles, while US appeared to enhance the degradation of grease-containing cells.     

Market Processes and the Closing of 'Industrial Loops'

Many industrial ecologists assume that traditional economic development was characterized by a linear approach in which materials and energy were extracted, processed, used, and dumped in a linear flow into, through, and out of the economy. Much historical evidence, however, indicates that industrial resource recovery was much more widespread than currently thought. This article reviews the available evidence by introducing the reader to earlier literature on the topic and by providing a short case study of animal by-products recovery from the Neolithic period to the middle of the twentieth century. The main finding of this article is that the belief that market actors systematically failed to close "industrial loops" in earlier eras is inaccurate. Furthermore, it is pointed out that the industrial ecology metaphor was actually well understood in the middle of the nineteenth century.