Influence of the composition and preparation method on the morphology and swelling behavior of alginate–chitosan hydrogels

In this study, a 2⁴ factorial experimental design was employed in order to evaluate the influence of the reaction conditions and preparation method on alginate–chitosan hydrogel properties. Alginate content, pH, chitosan molecular weight and the hydrogel preparation method were the independent variables and the reaction yield, particle size, swelling degree and point of zero surface charge were the dependent variables. The results showed that hydrogels were spherical with an average diameter of 5.0 ± 2.0 μm. Reaction yield varied according to the parameters, and chitosan molecular weight showed the greatest influence. Furthermore, the swelling degree and point of zero surface charge showed a linear dependence on the alginate content. In this regard, the study showed that hydrogels with a specific charge and swelling degree can be obtained by controlling the alginate content using the equation here provided to give an enhanced and site-specific controlled drug release.     

小鼠胎肝细胞透明质酸3D培养体系的建立

为了利用透明质酸建立小鼠胎肝细胞3D培养体系,分离获得胚胎12~14d胎肝细胞,利用KM培养基进行初步2D肝干/祖细胞的筛选培养,并利用透明质酸及KM培养基配制水凝胶建立3D细胞培养体系.胎肝细胞在2D体系中呈现克隆状生长.分离培养获得的肝干/祖细胞,克隆在透明质酸建立的3D培养体系保持增殖活性,并进一步获得肝细胞功能特性,表现为3D培养上清中白蛋白合成和尿素水平显著增加.定量PCR结果显示,随着3D培养时间的延长,其肝细胞干性标志如AFP、CK19、Ep CAM、Prox1等表达水平都大幅度降低且接近成年小鼠肝脏表达水平.本研究成功建立基于透明质酸的小鼠胎肝细胞的3D无血清培养体系,并可促进小鼠胎肝细胞的肝细胞功能进一步成熟.     

Rapidly screening of α-glucosidase inhibitors from Dioscorea opposita Thunb. peel based on rGO@Fe3O4 nanocomposites microreactor

Present study aimed to immobilise the α-glucosidase on suitable supports to construct enzymatic microreactors and their subsequent applicability in efficient inhibitor screening from the Chinese Yam (Dioscorea opposita Thunb.) peel. A type of lamellar and porous composites (rGO@Fe₃O₄) were synthesised with a facile one-step solvothermal method and employed as carriers to construct enzymatic microreactors for screening α-glucosidase ligand from the Chinese Yam peel in league with the high performance liquid chromatography and mass spectrometry (HPLC-MS). The immobilisation amount of α-glucosidase on rGO@Fe₃O₄ under the optimised conditions was about 40?μg α-glucosidase/mg carriers. Furthermore, the binding capacities of screened inhibitors, 2,4-dimethoxy-6,7-dihydroxyphenanthrene and batatasin I, were 35.6 and 68.2%, respectively. Hence, considering their high screening efficiency and excellent magnetic separation ability, these as-prepared nanocomposite consisting of rGO and Fe₃O₄ may be potential supports for the enzyme (such as α-glucosidase) immobilisation for rapid α-glucosidase inhibitors screening from the diverse nature resources.     

Ultrafine Pt Nanoparticle‐Decorated Pyrite‐Type CoS2 Nanosheet Arrays Coated on Carbon Cloth as a Bifunctional Electrode for Overall Water Splitting

To improve the utilization efficiency of precious metals, metal‐supported materials provide a direction for fabricating highly active and stable heterogeneous catalysts. Herein, carbon cloth (CC)‐supported Earth‐abundant CoS₂ nanosheet arrays (CoS₂/CC) are presented as ideal substrates for ultrafine Pt deposition (Pt‐CoS₂/CC) to achieve remarkable performance toward the hydrogen and oxygen evolution reactions (HER/OER) in alkaline solutions. Notably, the Pt‐CoS₂/CC hybrid delivers an overpotential of 24 mV at 10 mA cm^?2 and a mass activity of 3.89 A Pt_mg^?1, which is 4.7 times higher than that of commercial Pt/C, at an overpotential of 130 mV for catalyzing the HER. An alkali‐electrolyzer using Pt‐CoS₂/CC as a bifunctional electrode enables a water‐splitting current density of 10 mA cm^?2 at a low voltage of 1.55 V and can sustain for more than 20 h, which is superior to that of the state‐of‐the‐art Pt/C+RuO₂ catalyst. Further experimental and theoretical simulation studies demonstrate that strong electronic interaction between Pt and CoS₂ synergistically optimize hydrogen adsorption/desorption behaviors and facilitate the in situ generation of OER active species, enhancing the overall water‐splitting performance. This work highlights the regulation of interfacial and electronic synergy in pursuit of highly efficient and durable supported catalysts for hydrogen and oxygen electrocatalytic applications.     

Jabuticaba‐Inspired Hybrid Carbon Filler/Polymer Electrode for Use in Highly Stretchable Aqueous Li‐Ion Batteries

Stretchable electronics are considered as next‐generation devices; however, to realize stretchable electronics, it is first necessary to develop a deformable energy device. Of the various components in energy devices, the fabrication of stretchable current collectors is crucial because they must be mechanically robust and have high electrical conductivity under deformation. In this study, the authors present a conductive polymer composite composed of Jabuticaba‐like hybrid carbon fillers containing carbon nanotubes and carbon black in a simple solution process. The hybrid carbon/polymer (HCP) composite is found to effectively retain its electrical conductivity, even when under high strain of ≈200%. To understand the behavior of conductive fillers in the polymer matrix when under mechanical strain, the authors investigate the microstructure of the composite using an in situ small‐angle X‐ray scattering analysis. The authors observe that the HCP produces efficient electrical pathways for filler interconnections upon stretching. The authors develop a stretchable aqueous rechargeable lithium‐ion battery (ARLB) that utilizes this HCP composite as a stretchable current collector. The ARLB exhibits excellent rate capability (≈90 mA h g^?1 at a rate of 20 C) and outstanding capacity retention of 93% after 500 cycles. Moreover, the stretchable ARLB is able to efficiently deliver power even when under 100% strain.     

Poly(ethylene glycol acrylate)‐functionalized hydrogels for heparan sulfate oligosaccharide recognition

Heparan sulfates are complex polysaccharides belonging to the family of glycosaminoglycans that participate to the regulation of cell behavior and tissue homeostasis. The biological activities conferred to heparan sulfates are largely dependent on the content and positioning of the sulfate groups along their saccharidic units. At present, identification of particular sulfation patterns in biologically relevant heparan sulfate sequences remains challenging. Although several approaches for structure analysis exist, the complexity of heparan sulfates makes new and original approaches still required. Here, we used molecular imprinting technologies to prepare a library of polyethylene glycol acrylate functionalized hydrogels with the aim to investigate their applicability as specific recognizing systems for fondaparinux, a synthetic pentasaccharide analog to the antithrombin binding site of heparin. Adequate choice of the hydrogel composition and controlling rebinding conditions were important determinants for improving the sulfated oligosaccharide recognition specificity and selectivity. Our results suggest that molecular imprinting approaches could be a possibility for the specific recognition of biologically active sequences in heparan sulfates.     

Preparation and characterization of cockle shell aragonite nanocomposite porous 3D scaffolds for bone repair

The demands for applicable tissue-engineered scaffolds that can be used to repair load-bearing segmental bone defects (SBDs) is vital and in increasing demand. In this study, seven different combinations of 3 dimensional (3D) novel nanocomposite porous structured scaffolds were fabricated to rebuild SBDs using an extraordinary blend of cockle shells (CaCo₃) nanoparticles (CCN), gelatin, dextran and dextrin to structure an ideal bone scaffold with adequate degradation rate using the Freeze Drying Method (FDM) and labeled as 5211, 5400, 6211, 6300, 7101, 7200 and 8100. The micron sized cockle shells powder obtained (75 µm) was made into nanoparticles using mechano-chemical, top-down method of nanoparticles synthesis with the presence of the surfactant BS-12 (dodecyl dimethyl bataine). The phase purity and crystallographic structures, the chemical functionality and the thermal characterization of the scaffolds’ powder were recognized using X-Ray Diffractometer (XRD), Fourier transform infrared (FTIR) spectrophotometer and Differential Scanning Calorimetry (DSC) respectively. Characterizations of the scaffolds were assessed by Scanning Electron Microscopy (SEM), Degradation Manner, Water Absorption Test, Swelling Test, Mechanical Test and Porosity Test. Top-down method produced cockle shell nanoparticles having averagely range 37.8±3–55.2±9 nm in size, which were determined using Transmission Electron Microscope (TEM). A mainly aragonite form of calcium carbonate was identified in both XRD and FTIR for all scaffolds, while the melting (Tm) and transition (Tg) temperatures were identified using DSC with the range of Tm 62.4–75.5 °C and of Tg 230.6–232.5 °C. The newly prepared scaffolds were with the following characteristics: (i) good biocompatibility and biodegradability, (ii) appropriate surface chemistry and (iii) highly porous, with interconnected pore network. Engineering analyses showed that scaffold 5211 possessed 3D interconnected homogenous porous structure with a porosity of about 49%, pore sizes ranging from 8.97 to 337 µm, mechanical strength 20.3 MPa, Young's Modulus 271±63 MPa and enzymatic degradation rate 22.7 within 14 days.     

Understanding the properties of aerobic sludge granules as hydrogels

Aerobic sludge granules are larger, denser microbial aggregates than activated sludge flocs with a smoother and more regular surface, which facilitates greater wastewater treatment intensity. Factors important in their growth are still poorly understood, which is an impediment to the construction and operation of full-scale aerobic sludge granule processes. Data in this article obtained with granules treating an abattoir wastewater provide evidence that aerobic sludge granules are hydrogels. The results also demonstrate a method for characterizing macromolecular associations. The rheological profile of these granules was found to be analogous with that of typical polymer gels. Water uptake or swelling reflects an equilibrium between granule elastic modulus and osmotic pressure, whereby uptake is increased by reducing solute concentration or the elastic modulus. A weakening of the extracellular polymeric substance (EPS) matrix as demonstrated with mechanical spectroscopy was induced by several environmental factors including temperature, pH and ionic strength. Uniform and elastic deformation was observed at low strain. Enzymatic degradation studies indicate that proteins and alpha-polysaccharides were the major granule structural materials. The aerobic sludge granules in the current study were therefore protein-polysaccharide composite physical hydrogels. While aerobic sludge granules treating an abattoir wastewater are used as a case study, many of the fundamental principles detailed here are relevant to other granulation processes. The paradigm established in this study can potentially be applied to better understand the formation of aerobic sludge granules and thus overcome a hurdle in the acceptance of aerobic sludge granulation as an alternative to more traditional wastewater treatment processes.     

Biopolymer-protected CdSe nanoparticles

A synthetic procedure for the encapsulation of cadmium selenide (CdSe) nanoparticles in a sago starch matrix is introduced. The nanocomposite was investigated using structural, spectroscopic, and thermal methods. TEM micrographs of the nanocomposite showed spherical CdSe particles of 4-5 nm in size coated with a biopolymer layer. The absorption edges of both the aqueous solution and the thin film of the CdSe-starch nanocomposite were shifted toward lower wavelengths in comparison to the value of the bulk semiconductor. Infrared measurements revealed that the interaction of CdSe nanoparticles and starch chains takes place via OH groups. Although the onset of the temperature of decomposition of CdSe-starch nanocomposite is lower than that of the pure matrix, thermogravimetric analysis also showed that introduction of CdSe nanoparticles significantly reduced starch degradation rate leading to high residual mass at the end of the degradation process.