Generation of Zerovalent Metal Core Nanoparticles Using n-(2-aminoethyl)-3-aminosilanetriol

In this work, a facile one-pot reaction for the formation of metal nanoparticles in a water solution through the use of n-(2-aminoethyl)-3-aminosilanetriol is presented. This compound can be used to effectively reduce and complex metal salts into metal core nanoparticles coated with the compound. By controlling the concentrations of salt and silane one is able to control reaction rates, particle size, and nanoparticle coating. The effects of these changes were characterized through transmission electron microscopy (TEM), UV-Vis spectrometry (UV-Vis), Nuclear Magnetic Resonance spectroscopy (NMR) and Fourier Transform Infrared spectroscopy (FTIR). A unique aspect to this reaction is that usually silanes hydrolyze and cross-link in water; however, in this system the silane is water-soluble and stable. It is known that silicon and amino moieties can form complexes with metal salts. The silicon is known to extend its coordination sphere to form penta- or hexa-coordinated species. Furthermore, the silanol group can undergo hydrolysis to form a Si-O-Si silica network, thereby transforming the metal nanoparticles into a functionalized nanocomposites.     

Preparation of Biopolymer Aerogels Using Green Solvents

Although the first reports on aerogels made by Kistler¹ in the 1930s dealt with aerogels from both inorganic oxides (silica and others) and biopolymers (gelatin, agar, cellulose), only recently have biomasses been recognized as an abundant source of chemically diverse macromolecules for functional aerogel materials. Biopolymer aerogels (pectin, alginate, chitosan, cellulose, etc.) exhibit both specific inheritable functions of starting biopolymers and distinctive features of aerogels (80-99% porosity and specific surface up to 800 m²/g). This synergy of properties makes biopolymer aerogels promising candidates for a wide gamut of applications such as thermal insulation, tissue engineering and regenerative medicine, drug delivery systems, functional foods, catalysts, adsorbents and sensors. This work demonstrates the use of pressurized carbon dioxide (5 MPa) for the ionic cross linking of amidated pectin into hydrogels. Initially a biopolymer/salt dispersion is prepared in water. Under pressurized CO₂ conditions, the pH of the biopolymer solution is lowered to 3 which releases the crosslinking cations from the salt to bind with the biopolymer yielding hydrogels. Solvent exchange to ethanol and further supercritical CO₂ drying (10 - 12 MPa) yield aerogels. Obtained aerogels are ultra-porous with low density (as low as 0.02 g/cm³), high specific surface area (350 - 500 m²/g) and pore volume (3 - 7 cm³/g for pore sizes less than 150 nm).     

Superabsorbent hydrogel composite made of cellulose nanofibrils and chitosan-graft-poly(acrylic acid)

Superabsorbent hydrogel composites based on cellulose nanofibrils and chitosan-graft-poly(acrylic acid) copolymer were developed in this work. The FTIR data showed that the copolymerization and the composite formation reaction were successfully performed. In addition, the XRD pattern indicated that the nanofibrils crystallinity was as high as 90%. A 2⁴⁻¹ fractional factorial design was employed to evaluate the effect of acrylic acid/chitosan molar ratio, crosslinker, initiator, and filler in the swelling capacity of hydrogel composites. By the analysis of variance (ANOVA), including F-test and P-values, it was found that the crosslinker and filler correspond to 40% and 30% of the evaluated response, respectively. The addition of nanofibrils provided faster equilibrium conditions as well as improved the swelling capacity in ca. 100 units, from 381 to 486. SEM images showed that the addition of nanofibrils into the hydrogel matrix increased the averaged-dimension of porous. Finally, the composites showed responsive behavior in relation to pH and salt solution. Such characteristics make these smart materials suitable for several technological applications.     

The advance anticancer role of polymeric core-shell ZnO nanoparticles containing oxaliplatin in colorectal cancer

We evaluated the activity of core-shell ZnO nanoparticles (ZnO-NPs@polymer shell) containing Oxaliplatin via polymerization through in vitro studies and in vivo mouse models of colorectal cancer. ZnO NPs were synthesized in situ when the polymerization step was completed by co-precipitation. Gadolinium coordinated-ZnONPs@polymer shell (ZnO-Gd NPs@polymer shell) was synthesized by exploiting Gd's oxophilicity (III). The biophysical properties of the NPs were studied using powder X-ray diffraction (PXRD), Fourier transforms infrared spectroscopy, Ultraviolet-visible spectroscopy (UV-Vis), field emission electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy, dynamic light scattering, and z-potential. (3-(4,5-Dimethylthiazol-2-yl)−2,5-diphenyltetrazolium bromide) (MTT) was used to determine the antiproliferative activity of ZnO-Gd-OXA. Moreover, a xenograft mouse model of colon cancer was exerted to survey its antitumor activity and effect on tumor growth. In the following, the model was also evaluated by histological staining (H-E; Hematoxylin & Eosin and trichrome staining) and gene expression analyses through the application of RT-PCR/ELISA, which included biochemical evaluation (MDA, thiols, SOD, CAT). The formation of ZnO NPs, which contained a crystallite size of 16.8 nm, was confirmed by the outcomes of the PXRD analysis. The Plate-like morphology and presence of Pt were obtained in EDX outcomes. TEM analysis displayed the attained ZnO NPs in a spherical shape and a diameter of 33 ± 8.5 nm, while the hydrodynamic sizes indicated that the particles were highly aggregated. The biological results demonstrated that ZnO-Gd-OXA inhibited tumor growth by inducing reactive oxygen species and inhibiting fibrosis, warranting further research on this novel colorectal cancer treatment agent.     

A short oxazolidine-2-one containing peptide forms supramolecular hydrogels under controlled conditions

Low-molecular-weight hydrogels are made of a small percentage of small organic molecules dispersed in an aqueous medium, which may aggregate in several manners using different methods. However, often the organic gelator in water has poor solubility, so the addition of a solubilising agent is required. In the case of acidic gelators, this mainly consists of the addition of a strong base, that is sodium hydroxide, that deprotonates the acidic moiety, so the gelator molecules become more soluble and tend to assemble into micelles, forming a dispersion. Some gelators, however, are sensitive to the harsh pH and get hydrolysed. This is the case of some molecules presenting carbamates in their features, like Fmoc-protected or oxazolidinone-containing peptides. In this paper, we present a valid alternative to sodium hydroxide, by dissolving a tripeptide containing an oxazolidinone moiety in a phosphate buffer (PB) medium at pH 7.4. The results obtained with the NaOH dissolution are compared with the ones with PB, as both methods present advantages and drawbacks. The use of NaOH produces transparent but weak hydrogels, as it exposes the gelator to harsh conditions that end up in its partial hydrolysis, which is more pronounced at high concentrations (≥10 mM). Using PB to dissolve the gelator, this problem is completely avoided as no hydrolysis product has been detected in the hydrogels, which are very stiff although more opaque. By tuning the preparation conditions, we can obtain a wide variety of hydrogels, with the properties required by the final application.     

Atomistic simulations of interfacial mechanical characteristics of carbon nanotube/silicon nanocomposites

The interfacial mechanical properties of carbon nanotube (CNT)-reinforced silicon nanocomposites are investigated by using molecular dynamics simulation method. The hybrid potential that includes Tersoff_2 potential for Si–Si in the silicon matrix, AIREBO potential for C–C in the CNTs and the Lennard-Jones (LJ) potential for Si–C in the interface is used in the nanocomposite system. The effects of such parameters as the CNT chirality, the CNT diameter and the CNT embedded length, the defects (Vacancy defects, Stone–Wales defects), the size of model, the temperature, the bonding strength and the cut-off distance of the interfacial LJ potential of nanocomposites on the pull force and the average interfacial shear strength (ISS) are investigated and discussed. The results show that the toughness and the maximum tensile strength have been increased significantly by adding the CNTs into the Si matrix. Also by increasing the LJ bonding strength and the cut-off distance of the LJ potential, the pull force and the ISS are increased significantly. The CNT chirality, the CNT diameter and the CNT embedded length have a great influence on the pull force and the ISS, while the effects of temperature, the defects and the size of model are very slight.     

β-Cyclodextrin hydrogels as potential drug delivery systems

β-cyclodextrins (βCD) are cyclic oligosaccharides which have been widely employed for pharmaceutical applications. Discs of insoluble polymers were synthesized by crosslinking β-cyclodextrins with the reagent epichlorohydrin. In this work, the possibility of employing a polymer containing 60 ± 3% βCD for drug delivery of two antiinflammatory (naproxen and nabumetone) and two antifungal drugs (naftifine and terbinafine) has been investigated. The interaction of Naproxen with the polymers was evidenced by X-ray diffractometry, FTIR spectroscopy and differential thermal analysis. Drug release kinetics were carried out at physiological conditions of pH and temperature, and kinetic and diffusion constants were calculated by fitting 60% of the release profile according to the Korsmeyer-Peppas equation. Also, diffusion coefficients were calculated according to the simplified Higuchi model. The drug release followed a simple Fickian diffusion mechanism for all the model drugs. This study suggests that these hydrogel matrices are potentially suitable as sustained release systems.     

Environmentally-controlled Microtensile Testing of Mechanically-adaptive Polymer Nanocomposites for ex vivo Characterization

Implantable microdevices are gaining significant attention for several biomedical applications^1-4. Such devices have been made from a range of materials, each offering its own advantages and shortcomings^5,6. Most prominently, due to the microscale device dimensions, a high modulus is required to facilitate implantation into living tissue. Conversely, the stiffness of the device should match the surrounding tissue to minimize induced local strain^7-9. Therefore, we recently developed a new class of bio-inspired materials to meet these requirements by responding to environmental stimuli with a change in mechanical properties^10-14. Specifically, our poly(vinyl acetate)-based nanocomposite (PVAc-NC) displays a reduction in stiffness when exposed to water and elevated temperatures (e.g. body temperature). Unfortunately, few methods exist to quantify the stiffness of materials in vivo¹⁵, and mechanical testing outside of the physiological environment often requires large samples inappropriate for implantation. Further, stimuli-responsive materials may quickly recover their initial stiffness after explantation. Therefore, we have developed a method by which the mechanical properties of implanted microsamples can be measured ex vivo, with simulated physiological conditions maintained using moisture and temperature control^13,16,17.To this end, a custom microtensile tester was designed to accommodate microscale samples^13,17 with widely-varying Young''s moduli (range of 10 MPa to 5 GPa). As our interests are in the application of PVAc-NC as a biologically-adaptable neural probe substrate, a tool capable of mechanical characterization of samples at the microscale was necessary. This tool was adapted to provide humidity and temperature control, which minimized sample drying and cooling¹⁷. As a result, the mechanical characteristics of the explanted sample closely reflect those of the sample just prior to explantation.The overall goal of this method is to quantitatively assess the in vivo mechanical properties, specifically the Young''s modulus, of stimuli-responsive, mechanically-adaptive polymer-based materials. This is accomplished by first establishing the environmental conditions that will minimize a change in sample mechanical properties after explantation without contributing to a reduction in stiffness independent of that resulting from implantation. Samples are then prepared for implantation, handling, and testing (Figure 1A). Each sample is implanted into the cerebral cortex of rats, which is represented here as an explanted rat brain, for a specified duration (Figure 1B). At this point, the sample is explanted and immediately loaded into the microtensile tester, and then subjected to tensile testing (Figure 1C). Subsequent data analysis provides insight into the mechanical behavior of these innovative materials in the environment of the cerebral cortex.     

Rechargeable Iron–Sulfur Battery without Polysulfide Shuttling

Sulfur represents one of the most promising cathode materials for next‐generation batteries; however, the widely observed polysulfide dissolution/shuttling phenomenon in metal–sulfur redox chemistries has severely restricted their applications. Here it is demonstrated that when pairing the sulfur electrode with the iron metal anode, the inherent insolubility of iron sulfides renders the shuttling‐free nature of the Fe–S electrochemical reactions. Consequently, the sulfur electrode exhibits promising performance for Fe²⁺ storage, where a high capacity of ≈1050 mAh g^?1, low polarization of ≈0.16 V as well as stable cycling of 150 cycles are realized. The Fe–S redox mechanism is further revealed as an intriguing stepwise conversion of S₈ ? FeS₂ ? Fe₃S₄ ? FeS, where a low volume expansion of ≈32.6% and all‐solid‐state phase transitions facilitate the reaction reversibility. This study suggests an alternative direction to exploit sulfur electrodes in rechargeable transition metal–sulfur batteries.     

Development of a simple coarse-grained DNA model for analysis of oligonucleotide complex formation

In this paper, we develop a coarse-grained nucleotide model for the purpose of simulating large-scale aptamer-based hydrogel network formation in future research. In the model, each nucleotide is represented by a single interaction site containing sugar, phosphate and base. Discontinuous molecular dynamics (DMD) simulations are performed to simulate formation and denaturation of oligonucleotide duplexes as a function of temperature. The simulated melting temperatures of oligonucleotide duplexes are calculated in simulations of systems with different sequences, lengths and concentrations of oligonucleotides, and compared to data from the OligoAnalyzer tool. The denaturation of oligonucleotide triplexes containing a hybridised structure of three different oligonucleotides is analysed using both simulations and experiments. The nucleotide model is found to be a good predictor of the oligonucleotide’s hybridised state for both duplexes and triplexes. This coarse-grained model has wide ranging applications in the development or optimisation of DNA-based technologies including DNA origami, DNA-enabled hydrogels and DNA-based biosensors.