Metacercarial dispersion and intracellular parasitism in a strigeid trematode

Combes C. and Nassi H. 1977. Metacercarial dispersion and intracellular parasitism in a strigeid trematode. International Journal for Parasitology7: 501–503. The life cycle of Apatemon graciliformis Szidat, 1928 (Trematoda, Strigeidae), a parasite of Biorrphalaria glabrata in Guadeloupe, involves a novel mode of transmission, experimentally demonstrated, between the second intermediate host and the definitive host. The furcocercariae penetrate gravid females of the ovoviviparous fish, Poecilia reticulata, and develop into metacercariae in vitelline vesicles of the embryos where they encyst a short time before parturition. The young guppies are born infected with 1–3 metacercariae. It is considered that young infected fish are more prone to predation by the definitive host, thereby increasing the probability of the cycle being completed. Domestic ducks have been experimentally infected with these metacercariae. If cercariae penetrate non-gravid P. reticulata, they enter the oocytes; this represents a phase of intracellular parasitism.     

Dielectric analysis of mitochondria isolated from rat liver II. Intact mitochondria as simulated by a double-shell model

The dielectric dispersion of isolated intact mitochondria in suspension has been measured between 10 kHz and 500 MHz. In isotonic KCI media at 4°C, the mitochondria maintained their characteristic ‘double membrane’ structure as examined by electron microscopy, and the observed dispersion curves were successfully simulated in terms of a superposition of two sub-dispersions having different characteristic frequencies and different permittivity magnitudes. Taking these observations into account we analyzed the dispersion data on the basis of a ‘double-shell’ model in which two concentric shells are meant to represent the mitochondrial outer and inner membranes. The analyses by a computerized curve-fitting method revealed that: (i) electric capacities for the outer and the inner membrane are 1.7 and 0.5 μF/cm², respectively, (ii) relative permittivity for the inner compartment (or the equivalent homogeneous matrical space) = 50–60, (iii) outer compartment-to-external conductivity ratio = 0.4–0.6, and (iv) inner compartment-to-external conductivity ratio = 0.14. The implications of these parameter values are discussed with due attention paid to the limitations inherent in our ‘double-shell’ model approach.     

Entropic interaction chromatography: separating proteins on the basis of size using end-grafted polymer brushes

Partitioning of a macromolecule into the interfacial volume occupied by a grafted polymer brush decreases the configurational entropy (DeltaSbrush(c)) of the terminally attached linear polymer chains due to a loss of free volume. Self-consistent field theory (SCF) calculations are used to show that DeltaSbrush(c) is a strong function of both the size (MWp) of the partitioning macromolecule and the depth of penetration into the brush volume. We further demonstrate that the strong dependence of DeltaSbrush(c) on MWp provides a novel and powerful platform, which we call entropic interaction chromatography (EIC), for efficiently separating mixtures of proteins on the basis of size. Two EIC columns, differing primarily in polymer grafting density, were prepared by growing a brush of poly(methoxyethyl acrylamide) chains on the surface of a wide-pore (1,000-A pores, 64-microm diameter rigid beads) resin (Toyopearl AF-650M) bearing surface aldehyde groups. Semipreparative 0.1-L columns packed with either EIC resin provide reduced-plate heights of 2 or less for efficient separation of globular protein mixtures over at least three molecular-weight decades. Protein partitioning within these wide-pore EIC columns is shown to be effectively modeled as a thermodynamically controlled process, allowing partition coefficients (K(P)) and elution chromatograms to be accurately predicted using a column model that combines SCF calculation of K(P) values with an equilibrium-dispersion type model of solute transport through the column. This model is used to explore the dependence of column separation efficiency on brush properties, predicting that optimal separation of proteins over a broad MWp range is achieved at low to moderate grafting densities and intermediate chain lengths.     

Spatial and temporal structures of pheromone plumes in fields and forests

Wind‐borne odour stimuli from a small point‐source of pheromone are intermittent owing to the effects of atmospheric turbulence on the odour plume. The work reported here measures the characteristics of the intermittent stimulus in open fields and forests during typical daytime atmospheric conditions. To model the pheromone plume, negatively charged atmospheric ions were used as a tracer. They were released from an ion generator, and ion detectors measured the fluctuating flux of ions at positions up to 20 m downwind in the open field case and 10 m in the forest. In both the open field and in the forest, ion signals were highly intermittent, with a signal present only 20% of the time. Ion signals recorded in the forest consisted of bursts with gaps between them of at least three‐fold greater duration than those from the open field. In both environments, bursts generally each comprised a series of ‘spikes’, on average three in the field and seven in the forest. To validate the use of ionized air plumes as models of pheromone plumes, the antennae of male Lymantria dispar (gypsy moth) were used as detectors to quantify the plume of synthetic (+)‐disparlure emanating from a 2000 ng point source placed ≈ 10 cm from the ion source. A comparison of ion signals and EAGs (electronantennograms) suggests that the antennae respond to the main spikes within a burst, but no consistent relationship between the strength of the spikes and the magnitude of the EAG response was found. The average strengths of bursts in the ion detector signal decreased systematically as the distance from the ion generator to the ion detector increased. A similar trend, however, was not detected in the EAG response.     

Enhancement of dissolution profile by solid dispersion (kneading) technique

This article investigates enhancement of the dissolution profile of valdecoxib using solid dispersion with PVP. The article also describes the preparation of fast-dissolving tablets of valdecoxib by using a high amount of superdisintegrants. A phase solubility method was used to evaluate the effect of various water-soluble polymers on aqueous solubility of valdecoxib. Polyvinyl pyrrolidone (PVP K-30) was selected and solid dispersions were prepared by the method of kneading. Dissolution studies, using the USP paddle method were performed for solid dispersions of valdecoxib. Infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and x-ray diffractometry (XRD) were performed to identify the physicochemical interaction between drug and carrier, hence its effect on dissolution. Tablets were formulated containing solid dispersion products and compared with commercial products. IR spectroscopy, XRD, and DSC showed no change in the crystal structure of valdecoxib. Dissolution of valdecoxib improved significantly in solid dispersion products (<85% in 5 minutes). Tablets containing solid dispersion exhibited better dissolution profile than commercial tablets. Thus, the solid dispersion technique can be successfully used for improvement of dissolution of valdecoxib. Published: August 18, 2006     

Assessment of the Effects of Increased Relaxation Dispersion Data on the Extraction of 3-site Exchange Parameters Characterizing the Unfolding of an SH3 Domain

Recently a suite of six CPMG relaxation dispersion experiments has been described for quantifying millisecond time-scale exchange processes in proteins. The methodology has been applied to study the folding reaction of a G48M Fyn SH3 domain mutant that exchanges between the native state, and low populated unfolded and intermediate states. A complex non-linear global optimization protocol allows extraction of the kinetics and thermodynamics of the 3-site exchange process from the experimental data, as well as reconstruction of the amide group chemical shifts of the excited states. We show here, through a series of Monte-Carlo simulations on various synthetic data sets, that the 3-site exchange parameters extracted for this system on the basis of ¹⁵N single-quantum (SQ) dispersion profiles exclusively, recorded at a single temperature, are significantly in error. While a temperature dependent ¹⁵N study improves the robustness of extracted parameters, as does a combined analysis of ¹⁵N and ¹H SQ data sets measured at a single temperature, the best agreement is observed in cases where the full complement of six dispersion profiles per residue is analyzed.     

Distribution of Insect Attacks in Biological Control of Weeds: Infestation of Centaurea virgata Flowerheads by a Gall Fly

The success of biological control efforts to reduce weed density through release of insects may depend as much on the distribution of insect attacks among individual plants or plant parts as on the mean level of infestation. We used an index of dispersion to describe the distribution of Urophora quadrifasciata (Diptera: Tephritidae) galls among squarrose knapweed (Centaurea virgata) flowerheads at 18 west central Utah sites in the first 5 years following introduction of the biological control agent. Two thirds of the samples showed a significantly aggregated distribution of galls among flowerheads. Statistical analysis showed that site and year accounted for relatively small proportions of the variance in the index of dispersion. The degree of gall aggregation among flowerheads was positively correlated with the mean flowerhead quality (mean number of seeds per flowerhead; P = 0.013) and tended to be negatively correlated with the mean fly density per flowerhead at a site in a given year (P = 0.097). Our data suggest that higher quality flowerheads, and possibly higher quality plants, are preferentially attacked by U. quadrifasciata and therefore are more heavily subject to reduced reproductive potential through biological control. However, an aggregated distribution of fly attacks may undercut the potential of the fly to reduce seed production by the weed population as a whole. Understanding both the distribution of insect attacks among individual plants and the behavioral mechanisms producing such distribution patterns is important to the biological control of weeds.     

When size does matter: organelle size influences the properties of transport mediated by molecular motors

Background

Organelle transport is driven by the action of molecular motors. In this work, we studied the dynamics of organelles of different sizes with the aim of understanding the complex relation between organelle motion and microenvironment.

Methods

We used single particle tracking to obtain trajectories of melanosomes (pigmented organelles in Xenopus laevis melanophores). In response to certain hormones, melanosomes disperse in the cytoplasm or aggregate in the perinuclear region by the combined action of microtubule and actin motors.

Results and conclusions

Melanosome trajectories followed an anomalous diffusion model in which the anomalous diffusion exponent (α) provided information regarding the trajectories' topography and thus of the processes causing it. During aggregation, the directionality of big organelles was higher than that of small organelles and did not depend on the presence of either actin or intermediate filaments (IF). Depolymerization of IF significantly reduced α values of small organelles during aggregation but slightly affect their directionality during dispersion.

General significance

Our results could be interpreted considering that the number of copies of active motors increases with organelle size. Transport of big organelles was not influenced by actin or IF during aggregation showing that these organelles are moved processively by the collective action of dynein motors. Also, we found that intermediate filaments enhance the directionality of small organelles suggesting that this network keeps organelles close to the tracks allowing their efficient reattachment. The higher directionality of small organelles during dispersion could be explained considering the better performance of kinesin-2 vs. dynein at the single molecule level.     

PILZ Protein Structure and Interactions with PILB and the FIMX EAL Domain: Implications for Control of Type IV Pilus Biogenesis

The PilZ protein was originally identified as necessary for type IV pilus (T4P) biogenesis. Since then, a large and diverse family of bacterial PilZ homology domains have been identified, some of which have been implicated in signaling pathways that control important processes, including motility, virulence and biofilm formation. Furthermore, many PilZ homology domains, though not PilZ itself, have been shown to bind the important bacterial second messenger bis(3′→5′)cyclic diGMP (c-diGMP). The crystal structures of the PilZ orthologs from Xanthomonas axonopodis pv citri (PilZ_XAC1133, this work) and from Xanthomonas campestris pv campestris (XC1028) present significant structural differences to other PilZ homologs that explain its failure to bind c-diGMP. NMR analysis of PilZ_XAC1133 shows that these structural differences are maintained in solution. In spite of their emerging importance in bacterial signaling, the means by which PilZ proteins regulate specific processes is not clear. In this study, we show that PilZ_XAC1133 binds to PilB, an ATPase required for T4P polymerization, and to the EAL domain of FimX_XAC2398, which regulates T4P biogenesis and localization in other bacterial species. These interactions were confirmed in NMR, two-hybrid and far-Western blot assays and are the first interactions observed between any PilZ domain and a target protein. While we were unable to detect phosphodiesterase activity for FimX_XAC2398in vitro, we show that it binds c-diGMP both in the presence and in the absence of PilZ_XAC1133. Site-directed mutagenesis studies for conserved and exposed residues suggest that PilZ_XAC1133 interactions with FimX_XAC2398 and PilB_XAC3239 are mediated through a hydrophobic surface and an unstructured C-terminal extension conserved only in PilZ orthologs. The FimX-PilZ-PilB interactions involve a full set of “degenerate” GGDEF, EAL and PilZ domains and provide the first evidence of the means by which PilZ orthologs and FimX interact directly with the TP4 machinery.