链霉菌ZG0429的分类鉴定与链霉亲和素的分离纯化研究

从土壤中筛选得到1株高产链霉亲和素的放线菌ZG0429,根据形态观察、培养特征、生理生化鉴定以及16S rRNA序列分析,初步判定该菌株为链霉菌属中的淡紫灰链霉菌(Streptomyces lavendulae)。经发酵,ZG0429的链霉亲和素产量可达201.0mg/L。进一步采用硫铵沉淀和凝胶过滤层析纯化,链霉亲和素的回收率为76.87%,纯度可以达到97.03%。该方法简单易行,成本低廉,可得到高产量、高纯度、高活性的目的蛋白,为链霉亲和素发酵产品的大规模纯化提供了依据。     

Synthesis, characterization and luminescence property of heterobimetallic trinuclear Mo(W)-Ag-S clusters containing 1,2-bis(diphenylphosphino)-1,2-dicarba-closo-dodecaborane

Reactions of (NH₄)₂MS₄ or (NH₄)₂MOS₃ (M = Mo, W) with AgSCN and closo carborane diphosphine ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ (L) in CH₂Cl₂ yielded four heterobimetallic trinuclear Mo(W)-Ag-S clusters: [Ag₂MoS₄L₂] (1), [Ag₂WS₄L₂] (2), [Ag₂MoOS₃L₂] (3) and [Ag₂WS₄L₂] (4), respectively. All the new clusters have been characterized by elemental analysis, FT-IR, UV-Vis, ¹H and ¹³C NMR spectroscopy and their molecular structures (except for 3) were further confirmed by single-crystal X-ray diffraction. X-ray crystal structure analysis showed that the closo carborane diphosphine ligand was coordinated bidentately to Ag(I) atom through its two phosphorus atoms, resulting in a stable five-member chelating ring between the diphosphine ligand and the metal. The coordination sphere of the central M atom, as well as all the Ag atoms, was tetrahedron. The skeletons of these clusters could be classified into two types: with (NH₄)₂MS₄, the three metal atoms (two Ag atoms and one M atom) are in a linear conformation, while with (NH₄)₂MOS₃, the conformation of the heterobimetallic trinuclear cluster is butterfly shaped. The luminescence properties of the clusters were investigated in CH₂Cl₂ solution at room temperature and for the first time the butterfly-shaped Ag-W-S cluster containing the Ag₂WS₄ core has been proved to show luminescence property.     

隆肛蛙属种群形态量度分析

对隆肛蛙属Feirana中隆肛蛙F.quadrana和太行隆肛蛙F.taihangnicus的15个种群565只标本的28项形态性状进行了测量,并运用典型判别分析法对其进行分析,分析结果表明:1)太行隆肛蛙和隆肛蛙的形态差异明显,形态度量信息支持太行隆肛蛙与隆肛蛙是不同的物种;2)原隆肛蛙河南伏牛山种群和山西中条山种群均为太行隆肛蛙的地理种群;3)隆肛蛙的种群间形态差异明显,其中四川安县种群、陕西周至种群和湖北利川种群与模式产地重庆巫山种群的差异可能达到了亚种或亚种以上分化水平.     

恒河猴皮肤干细胞的体外培养纯化与鉴定

探索恒河猴皮肤干细胞的体外培养及纯化条件,为进一步的研究奠定基础. 通过组织块培养法和消化培养法 在体外培养恒河猴表皮细胞,然后用Ⅳ型胶原吸附法吸附20 min,获得快吸附细胞. 对快吸附细胞进行克隆培养,并进行免疫细胞化学双标染色、RT PCR鉴定 β1 整合素和角蛋白15的表达,用流式细胞仪鉴定纯化前后的细胞中 β1 整合素和角蛋白15的阳性细胞比例,并通过透射电镜观察细胞的超微结构. 组织块培养法和消化培养法均可获得表皮细胞,Ⅳ型胶原纯化后的细胞胞体较小,饱满,核/浆比例大,细胞镶嵌状排列. 细胞克隆分析显示,细胞全克隆生长率高. 细胞免疫荧光显示,分选后的细胞显示 β1 整合素和角蛋白15阳性. RT PCR检查呈现 β1 整合素和角蛋白15的特异性片段. 流式细胞仪检查显示,纯化前的细胞中角蛋白15阳性细胞占总细胞中的比例为8％, β1 整合素阳性细胞的比例为10.7％;纯化后,角蛋白15阳性细胞的比例为89.4％, β1 整合素阳性细胞的比例为88.5％. 通过组织块培养法和消化培养法均可培养获得活性良好的表皮细胞,Ⅳ型胶原吸附法是一种简便、有效的皮肤干细胞分离方法,可以为进一步的眼表上皮替代重建眼表提供足量的高纯度的干细胞建立可靠的物质基础.     

Contemplating Risk Assessment: A Critique of NRC (1983, 1996)

Assessing risks involves developing predictive mathematical models, using interpretations of data that are based on scientific assumptions or theories and knowledge of how the data were created. The predictions are used for developing strategies that affect many people in society. Often, it is sufficient that the models that are used are justifiable by a well-accepted set of assumptions or theories, reflecting the state-of-the art science at the time. However, this does not ensure that the “best” decision would be made, nor does it ensure that the decision processes would be fair by ensuring that concerned and affected individuals would be able to participate, effectively presenting arguments on their own behalf. Because of these concerns, procedures of risk analysis, including the management of the process, have been written about, for example, in a National Research Council (NRC 1996 NRC. 1996. Understanding Risk, Informing Decisions in a Democratic Society, Washington, DC, , USA: National Academy Press.  [Google Scholar]) publication, with the intention of getting stakeholders (interested participants) more involved in the risk analysis process. This publication suggests that Risk Characterization be expanded to include an active participation of stakeholders. Such an expansion would affect the risk assessor's approach toward science compared to the present approach, as implied in the seminal NRC (1983) NRC (National Research Council). 1983. Risk Assessment in the Federal Government: Managing the Process, Washington, DC, , USA: National Academy Press.  [Google Scholar] publication. Both of these NRC publications have had great influence on the development of risk analysis management and policy in the United States and elsewhere. Subsequent risk assessment guidance documents have generally relied heavily on these publications, but have focused mainly on managerial attitudes (or policy) toward the uncertainty that is inherent in risk assessment and in communicating to the public the risk assessment conclusions and decisions made from them. Subsequent documents have not, unlike NRC (1996) NRC. 1996. Understanding Risk, Informing Decisions in a Democratic Society, Washington, DC, , USA: National Academy Press.  [Google Scholar], focused on the risk assessors' attitude toward science inference that would better help ensure that risk assessments contain the type of information that could be used to empower stakeholders. Thus, in this Perspective article I focus on the two NRC “foundation documents,” identifying and contrasting two types of approaches toward science, one narrow and the other expansive. The latter approach is designed to increase stakeholders' involvement more than the former. The features of the expansive approach include a contemplative method toward science, where the risk assessor does not express opinions or take a stand regarding the scientific material, but rather considers many possibilities, presents discussions that include direct challenges to assumptions, and uses falsification principles for excluding theories.     

A longitudinal study to assess the persistence of vancomycin-resistant Enterococcus faecium (VREF) on an intensive broiler farm in the United Kingdom

Seven years after the ban of avoparcin, VREF could still be isolated within sectors of the UK broiler industry. The aim of this study was to assess whether there is a carryover of VREF between consecutive flocks of birds, to conduct a preliminary investigation of possible routes of entry of VREF into broiler houses and to follow the dynamics of VREF shed by growing birds. A series of nine visits were made to two of six houses on a conventional broiler farm. A total of 343 vanA VREF were recovered from environmental (95/843) and faecal (248/416) samples. Significant differences were observed in the carryover of VREF between pre- and postcohort postcleaning and disinfection visits (RR 0.57, P=0.006). Ninety-nine percent of the VREF isolates were resistant to more than five antimicrobials, with 42 isolates (n=49) positive for erm(B) and 32 (n=40) for vat(E). Pulsed field gel electrophoresis (PFGE) typing identified 50 PFGE types within 15 different PFGE clusters of 90% similarity, demonstrating a high level of genetic diversity within VREF populations from epidemiologically related broiler flocks and broiler houses. Further characterization of Tn1546 from different clones showed a low diversity of Tn-types, suggesting horizontal transfer of resistance determinants between different genetic clones. Thus, this study does not only show the persistence of VREF but also of multi-drug resistant lineages of VREF.     

Existing and emerging detection technologies for DNA (Deoxyribonucleic Acid) finger printing, sequencing, bio- and analytical chips: a multidisciplinary development unifying molecular biology, chemical and electronics engineering

The current status and research trends of detection techniques for DNA-based analysis such as DNA finger printing, sequencing, biochips and allied fields are examined. An overview of main detectors is presented vis-à-vis these DNA operations. The biochip method is explained, the role of micro- and nanoelectronic technologies in biochip realization is highlighted, various optical and electrical detection principles employed in biochips are indicated, and the operational mechanisms of these detection devices are described. Although a diversity of biochips for diagnostic and therapeutic applications has been demonstrated in research laboratories worldwide, only some of these chips have entered the clinical market, and more chips are awaiting commercialization. The necessity of tagging is eliminated in refractive-index change based devices, but the basic flaw of indirect nature of most detection methodologies can only be overcome by generic and/or reagentless DNA sensors such as the conductance-based approach and the DNA-single electron transistor (DNA-SET) structure. Devices of the electrical detection-based category are expected to pave the pathway for the next-generation DNA chips. The review provides a comprehensive coverage of the detection technologies for DNA finger printing, sequencing and related techniques, encompassing a variety of methods from the primitive art to the state-of-the-art scenario as well as promising methods for the future.     

Purification and Characterization of an Alkaline Protease from the Marine Yeast <Emphasis Type="Italic">Aureobasidium pullulans</Emphasis> for Bioactive Peptide Production from Different Sources

The extracellular alkaline protease in the supernatant of cell culture of the marine yeast Aureobasidium pullulans 10 was purified to homogeneity with a 2.1-fold increase in specific protease activity as compared to that in the supernatant by ammonium sulfate fractionation, gel filtration chromatography (Sephadex™ G-75), and anion-exchange chromatography (DEAE Sepharose Fast Flow). According to the sodium dodecyl sulfate-polyacrylamide gel electrophoresis data, the molecular mass of the purified enzyme was estimated to be 32.0 kDa. The optimal pH and temperature of the purified enzyme were 9.0 and 45°C, respectively. The enzyme was activated by Cu²⁺ (at a concentration of 1.0 mM) and Mn²⁺ and inhibited by Hg²⁺, Fe²⁺, Fe³⁺, Zn²⁺, and Co²⁺. The enzyme was strongly inhibited by phenylmethylsulfonyl fluoride, but weakly inhibited by EDTA, 1–10-phenanthroline, and iodoacetic acid. The K _m and V _max values of the purified enzyme for casein were 0.25 mg/ml and 0.0286 μmol/min/mg of protein, respectively. After digestion of shrimp protein, spirulina (Arthospira platensis) protein, proteins of marine yeast strains N3C (Yarrowia lipolytica) and YA03a (Hanseniaspora uvarum), milk protein, and casein with the purified alkaline protease, angiotensin I converting enzyme (ACE) inhibitory activities of the resulting peptides reached 85.3%, 12.1%, 29.8%, 22.8%, 14.1%, and 15.5%, respectively, while the antioxidant activities of these were 52.1%. 54.6%, 25.1%, 35%, 12.5%, and 24.2%, respectively, indicating that ACE inhibitory activity of the resulting peptides from the shrimp protein and antioxidant activity of those produced from the spirulina protein were the highest, respectively. These results suggest that the bioactive peptides produced by digestion of the shrimp protein with the purified alkaline protease have potential applications in the food and pharmaceutical industries.     

Stabilization of hot-melt extrusion formulations containing solid solutions using polymer blends

This study was aimed at enhancing the physical stability of the drug clotrimazole (CT) and the polymer contained within hot-melt extrusion (HME) films using polymer blends of hydroxypropyl cellulose (HPC) and poly(ethylene oxide) (PEO). The HME films were investigated for solid-state characteristics, moisture sorption, bioadhesivity, mechanical properties, glass transition temperature, release characteristics, and physical and chemical stability of the drug and the polymer within the HME films. The solid-state characterization of the drug and the polymer was performed using differential scanning calorimetry, x-ray diffractometry, and dynamic mechanical analysis. A texture analyzer was used to study the bioadhesive and mechanical properties of the HME films. The physical and chemical stability of the films, stored at 25°C/60% relative humidity or in a desiccator, was studied for up to 12 months. CT was found to be in solid solution within all of the formulations extruded. The physical stability of the drug and PEO in the HME films increased with increasing HPC concentration, but the bioadhesivity and flexibility of the PEO films decreased with increasing HPC concentration. Films containing HPC: PEO∶CT in the ratio of 55∶35∶10 demonstrated optimum physical-mechanical, bioadhesive, and release properties. In conclusion, polymer blends of HPC and PEO were used successfully to tailor the drug release, mechanical and bio-adhesive properties, and stability of the HME films. Published: June 29, 2007