Biochemical changes accompanying the long-term starvation of Micrococcus luteus cells in spent growth medium

Changes in the biochemical properties of Micrococcus luteus cells were studied during the transition to a dormant state after incubation in an extended stationary phase. The overall DNA content after 150 days of starvation was similar to its initial level, while the RNA content decreased by 50%. Total lipids and protein, phospholipids and membrane proteins declined rapidly within the first 1–10 days of starvation. After 180 days of starvation, cells contained 43% of the protein and 35% of the lipid initially present. Starvation for 120 days resulted in the loss of phosphatidylglycerol and, to some extent, of phosphatidylinositol, giving a membrane whose phospholipids consisted mainly of cardiolipin. The membrane fluidity declined during starvation, as judged by diphenyl hexatriene fluorescence anisotropy measurements. Oxidase activities declined to zero within the first 20–30 days of starvation, while the dehydrogenases and cytochromes were more stable. The activities of some cytoplasmic enzymes were lost very rapidly, while NADPH-linked isocitrate dehydrogenase had 30% of its initial activity after 120 days of starvation. For all parameters tested there were significant fluctuations during the first 10–20 days of starvation, which may reflect cryptic growth in the culture.Abbreviations MPN Most probable number - DPH Diphenyl hexatriene     

Synchronization of drosophila cells in culture

Summary We synchronized Drosophila cell lines (Schneider's line 2 and K_c) by allowing the cells to enter the stationary phase of growth and then diluting them into fresh culture medium. The cells of both cell lines entered S phase, after an 8- to 14-hr delay, in a state of partial synchrony; 60 to 80% of the cell population accumulated in S phase. Measurements of the cell cycle phases of Schneider's line 2 cells (S=14 to 16 hr; G₂=6 to 8 hr; M=0.4 hr) were similar to those of K_c cells. This work was performed under the auspices of the U.S. Energy Research and Development Administration. A.R. was supported by an NIH post-doctoral fellowship, No. CA01060.     

Low hydration phase properties of phospholipid mixtures

An experimental investigation of the low hydration phase properties of phospholipid mixtures is described. ²H (D₂O) NMR, X-ray diffraction and differential scanning calorimetry have been used to elucidate the phase properties of mixtures of the mixed chain phospholipids palmitoyloleoylphosphatidylcholine (POPC) and palmitoyloleoylphosphatidylethanolamine (POPE). At 10% hydration pure POPE exhibited a H_II phase above 330 K, a fluid lamellar phase below 315 K, and a minimally hydrated crystalline phase below 300 K. For the 1:1 mixture, the samples exhibited only gel or fluid phases between 270 K and 360 K for hydrations in the range 15% to 30%. Below 15% hydration the mixture exhibited two fluid phases with different repeat spacings, as predicted previously.     

Two- and three-phase mixing in a concentric draft tube gas-lift fermentor

Two- and three-phase mixing studies were carried out in a 44-L concentric draft tube gas-lift fermentor. It was proposed to use the fermentor for the production of solvents using immobilized bacteria. Bubble size, gas holdup, liquid velocities, circulation, and mixing times were determined for various superficial gas velocities in distilled water, starch, carboxymethyl cellulose, and ethanol solutions. The observed trends for two phase mixing were similar to other studies but the results were found to be more sensitive to liquid properties. This was possibly due to the large value of downcomer to riser area used in this study. Mixing in three phases highlighted the difficulty in predicting the effect of adding solids to the gas-liquid system. Results showed that the gas-lift fermentor was ideally suited to dealing with three phases but more work is necessary before accurate models can be developed to account for the effect of solids.     

Effects of proteins on the thermotropic phase transitions of phospholipid membranes

A variety of proteins have been studied for their ability to interact and alter the thermotropic properties of phospholipid bilayer membranes as detected by differential scanning calorimeter. The proteins studied included: basic myelin protein (A1 protein), cytochrome c, major apoprotein of myelin proteolipid (N-2 apoprotein), gramicidin A, polylysine, ribonuclease and hemoglobin. The lipids used for the interactions were dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylglycerol. The interactions were grouped in three categories each having very different effects on the phospholipid phase transition from solid to liquid crystalline. The calorimetric studies were also correlated with data from vesicle permeability and monolayer expansion.Ribonuclease and polylysine which exemplify group 1 interactions, show strong dependence on electrostatic binding. Their effects on lipid bilayers include an increase in the enthalpy of transition (ΔH) accompanied by either an increase or no change in the temperature of transition (T_c). In addition, they show minimal effects on vesicle permeability and monolayer expansion. It was concluded that these interactions represent simple surface binding of the protein on the lipid bilayer without penetration into the hydrocarbon region.Cytochrome c and Al protein, which exemplify group 2 interactions, also show a strong dependence on the presence of net negative charges on the lipid bilayers for their binding. In contrast to the first group, however, they induce a drastic decrease in both T_c and ΔH of the lipid phase transition. Furthermore, they induce a large increase in the permeability of vesicles and a substantial expansion in area of closely packed monolayers at the air-water interface. It was concluded that group 2 interactions represent surface binding followed by partial penetration and/or deformation of the bilayer.Group 3 interactions, shown by proteolipid apoprotein and gramicidin A, were primarily non-polar in character, not requiring electrostatic charges and not inhibited by salt and pH changes. They had no appreciable effect on the T_c but did induce a linear decrease in the magnitude of the ΔH, proportional to the percentage of protein by weight. Membranes containing 50% proteolipid protein still exhibited a thermotropic transition with a ΔH one half that of the pure lipid, and only a small diminution of the size of the cooperative unit. It was concluded that in this case the protein was embedded within the bilayer, associating with a limited number of molecules via non-polar interactions, while the rest of the bilayer was largely unperturbed.     

Amphiphiles for supercritical CO2

A semi-fluorinated hybrid amphiphile, pentadecafluoro-5-dodecyl (F7H4) sulfate, has been shown to form reversed micelles in dense CO₂; the aggregates evolve to form water-in-CO₂ (w/c) microemulsion droplets on addition of water. Aggregation structures in these w/c phases have been characterised by small-angle neutron scattering (SANS), showing the presence of cylindrical droplets, which change into dispersed lamellar phases at even higher water loadings. Other systems are also introduced, being high internal phase emulsions (HIPEs) with brine, and liquid and supercritical CO₂, stabilized by certain commercially available nonylphenol ethoxylates (Dow Tergitol NP-, and Huntsman Surfonic N- amphiphiles). These dispersions have been characterised by SANS for the first time. Quantitative analyses of the HIPEs SANS profiles show that they behave similarly to hydrocarbon-water emulsion analogues, with regard to total interfacial areas and the effects of amphiphile concentration on the underlying structures. Finally, the advantages and disadvantages of both approaches for controlling the physico-chemical properties of liquid/supercritical CO₂ in potential applications are compared and contrasted. These results highlight the importance of using specially designed CO₂-philic amphiphiles for generating self-assembly structures in dense CO₂.     

Development of silver-containing austenite antibacterial stainless steels for biomedical applications Part I: microstructure characteristics,mechanical properties and antibacterial mechanisms

The as-quenched (AQ) microstructure of the Ag-containing alloys was found to be essentially a mixture of austenite (γ) and Ag phases. The Ag phase precipitates had a face-centered-cubic structure and lattice parameter a = 4.09 Å. When the alloy contained Ag ≥0.2 wt%, the mechanical properties were slightly enhanced because of the precipitate strengthening by the Ag phase precipitates. Moreover, the Ag-containing alloys exhibited ductile fracture after tensile testing. The results of an antibacterial test revealed that the Ag phase precipitates play a key role in the antibacterial mechanism of Ag-containing alloys: Ag⁺ ions released from the Ag phase precipitates can kill bacteria. It is suggested that as AISI 316L alloy has an Ag content ≥0.2 wt%, it will have excellent antibacterial properties against both Staphylococcus aureus and Escherichia coli, with an antibacterial rate of nearly 100%.     

Flexible Solar Thermal Fuel Devices: Composites of Fabric and a Photoliquefiable Azobenzene Derivative

Controllable storage and release of solar energy has always been a highlighted scientific issue for its benefit of mankind. Solar thermal fuels (STFs) supply a closed cycle and renewable energy‐storage strategy by transforming solar energy into chemical energy stored in the conformation of molecular isomers, such as cis/trans‐azobenzene, and releasing it as heat under various stimuli. Although the potential high energy density of the STFs which are based on the hybrids of azobenzene derivatives and carbon nanomaterials has been reported the solvent‐assistant charging hinders their practicability. In this study, a solid‐state STF device is designed and fabricated by compositing one photoliquefiable azobenzene (PLAZ) derivative with a flexible fabric template. The photoinduced phase transition of the PLAZ derivative enables the charging of the flexible STFs to be totally solvent‐free. Interestingly, the energy‐storage capacity (energy density ≈201 J g^?1) of flexible PLAZ STFs has been improved by the soft fabric template. The exothermic situation is monitored with one infrared camera, which shows 4 °C temperature difference between charged and discharged samples under blue light stimulus. The flexible STFs are may be used in practice as heating equipment.     

The solid phase attachment of fungal hyphae in an ELISA to screen for antifungal antibodies

A method to immobilize fungal hyphae onto the wells of 96-well microplates for use in an in-direct ELISA to screen for antifungal antibodies in sera and cell culture supernatants is described. The hyphae from three genera (Penicillium, Eurotium andFusarium) were successfully attached by overnight drying onto wells precoated with poly-L-lysine and glutaraldehyde. Microscopy revealed that the hyphae remained attached to the wells throughout the ELISA and antiserum titrations showed that the attached hyphae were uniformly coated and remained reactive. Background absorbances were low and the plates could be stored at –20 °C without loss of reactivity.