Progress in the biotechnology of trees

An increasing world population and rise in demand for tree products, especially wood, has increased the need to produce more timber through planting more forest with improved quality stock. Superior trees are likely to arise from several sources. Firstly, forest trees can be selected from wild populations and cloned using macropropagation techniques already being investigated for fruit tree rootstocks. Alternatively, propagation might be brought aboutin vitro through micropropagation or sustained somatic embryogenesis, with encapsulation of the somatic embryos to form artificial seeds. Tree quality could be improved through increased plant breeding and it is likely that experienced gained, to date, in the breeding of fruit species will be useful in devising strategies for forest trees. Since the development of techniques to regenerate woody plants from explant tissues, cells and protoplasts, it is now feasible to test the use of tissue culture methods to bring about improvements in tree quality. Success has already been achieved for tree species in the generation of somaclonal and protoclonal variation, the formation of haploids, triploids and polyploids, somatic hybrids and cybrids and the introduction of foreign DNA through transformation. This review summarizes the advances made so far in tree biotechnology, and suggests some of the directions that it might take in the future.     

The emergence of transgenic potatoes as commercial products and tools for basic science

The potato has tremendous potential as a transgenic crop and is a good model system by which to analyse metabolic regulation and gene expression. The potato’s difficult genetics, but ease of genetic transformation and its clonal means of propagation make it ideal for applied agricultural molecular genetics. Thus, the next 4 years promise to put the potato (with a diversity of transgenic constructs expressed) in the limelight as many of the first transgenic agricultural products enter the marketplace.     

Codon usage and G+C content in Bradyrhizobium japonicum genes are not uniform

To date, the sequences of 45 Bradyrhizobium japonicum genes are known. This provides sufficient information to determine their codon usage and G+C content. Surprisingly, B. japonicum nodulation and NifA-regulated genes were found to have a less biased codon usage and a lower G+C content than genes not belonging to these two groups. Thus, the coding regions of nodulation genes and NifA-regulated genes could hardly be identified in codon preference plots whereas this was not difficult with other genes. The codon frequency table of the highly biased genes was used in a codon preference plot to analyze the RSRj9 sequence which is an insertion sequence (IS)-like element. The plot helped identify a new open reading frame (ORF355) that escaped previous detection because of two sequencing errors. These were now corrected. The deduced gene product of ORF355 in RSRj9 showed extensive similarity to a putative protein encoded by an ORF in the T-DNA of Agrobacterium rhizogenes. The DNA sequences bordering both ORFs showed inverted repeats and potential target site duplications which supported the assumption that they were IS-like elements.     

Numerical simulation of thermal bone necrosis during cementation of femoral prostheses

The implant of a femoral prosthesis is a critical process because of the relatively high temperature values reached at the bone/cement interface during the cementation of the infibulum. In fact, the cement is actually a polymer that polymerizes in situ generating heat. Moreover, the conversion of monomer into polymer is never 100%; this is dangerous because of the toxicity of the monomer. In this paper, we present a 3-D axisymmetric mathematical model capable of taking into account both the geometry of the implant and the chemical/physical properties of the cement. This model, together with its numerical simulation, thus represents a useful tool to set up the optimal conditions for the new materials developed in this orthopaedic field. The real complex geometry is assumed to be a bone/cement/metallic system having cylindrical symmetry, thus allowing the model to be reduced to two space variables. The cementation process is described by the Fourier heat equation coupled with a suitable polymerization kinetics. The numerical approximation is accomplished by semi-implicit finite differences in time and finite elements in space with numerical quadrature. The full discrete scheme amounts to solve linear positive definite symmetric systems preceded by an elementwise algebraic computation. We present various numerical simulations which confirm some critical aspects of this orthopaedic fixing technique such as thermal bone necrosis and the presence of unreacted residual monomer.This work was partially supported by MURST (Fondi per la Ricerca Scientifica 40%) and CNR (IAN, Contract 880032601, and Progetto Finalizzato Sistemi Informatici e Calcolo Parallelo, Sottoprogetto Calcolo Scientifico per Grandi Sistemi) of Italy     

The effect of geochemical factors on prevalences of dental diseases for prehistoric inhabitants of the state of Missouri

In previous epidemiological studies, it has been suggested that geochemical factors besides fluoride may affect the prevalences of dental diseases. Our objective in this study was to determine whether the prevalences of periodontal diseases, coronal caries, and root caries for prehistoric inhabitants vary between geochemical regions of the state of Missouri. Burial sites were located on unique maps that depict geochemical variation among regions of the state. Data on dental caries and alveolar bone loss were gathered from 179 of the best preserved skeletal remains of the Late Woodland (A.D. 400-900) and Mississippian (A.D. 900-1700) periods. Mean caries scores and proportions of individuals with caries were calculated for these geochemical regions. Average alveolar bone loss was regressed on age for the individuals of these regions. Significant differences in caries and bone loss were found between several regions. These differences cannot be adequately explained by fluoride concentrations or by diet. It is suggested that geochemical factors, in addition to fluoride, may have affected the prevalences of dental diseases.     

Trace element distributions in some saline lakes of the Vestfold Hills,Antarctica

The distributions of trace elements in Shield, Ace and Burton Lakes of the Vestfold Hills were investigated. Three aspects are discussed as follows: (1) the vertical distribution of 18 trace elements in the three lakes, (2) the behaviour of trace elements in the lakes, especially that of manganese in Shield Lake, and (3) the origin of trace elements in antarctic saline lakes.High concentrations of trace elements were found in these coastal saline lakes, when compared to open ocean water.We suggest that the peak of total extractable manganese, found at 20 m in Shield Lake, was related to the oxic/anoxic water interface brought about by microbiological activity. Solid phase manganese at the upper oxic layer may have precipitated and then reached the anoxic boundary to be there reduced to manganese ion. This dissolved manganese may then have diffused upwards to be reoxidized to a solid form. This cycle, repeated many times, may have produced the Mn profile.The alkali, alkaline earth elements and Cl were probably derived from relict seawater. Other elements were present in similar concentration ratios to those of South Polar aerosols. Residence time calculations indicate that fallout of aerosol particles, themselves derived from various sources, is capable of accounting for the measured concentrations of some trace elements in Shield Lake. This source of trace elements may be significant for other antarctic saline lakes.     

Developmental rates of heterozygous and homozygous rainbow trout reared at three temperatures

The hatching distributions of rainbow trout (Salmo gairdneri) with different genotypes at eight loci are compared in two experiments with the same strain. Embryos were incubated at temperatures colder (5 and 8°C) and warmer (12°C) than normally experienced by these fish (9.5°C). At hatching, embryos were separated into five hatching groups representing the chronological order of hatching. There is no significant correlation between multilocus heterozygosity and hatching time at any temperature in either experiment. Fish in the middle of the hatching distribution had the highest average heterozygosity. In both experiments, heterozygotes at the majority of loci examined tended to hatch relatively later within the hatching distribution at 12°C than at both 5 and 8°C. Fish with different genotypes atPgm2 andCk1 showed significant differences in hatching time that were consistent between experiments.Ck1 heterozygotes hatched sooner than homozygotes at 8°C but later at 12°C.Pgm2 heterozygotes hatched later than homozygotes at all temperatures and significantly later in four of five cases. At the other loci examined, however, the relative hatching distributions of fish with particular genotypes were not significantly different or repeatable between experiments.This research was supported by National Science Foundation Grant BSR-8300039 awarded to Dr. Fred W. Allendorf. Moira M. Ferguson was supported by a postgraduate scholarship from the Natural Sciences and Engineering Research Council of Canada.     

Genetic variation of an acid phosphatase (Acp-2) in the laboratory rat: Possible homology with mouse AP-1 and human ACP2

A genetic locus controlling the electrophoretic mobility of an acid phosphatase in the rat (Rattus norvegicus) is described. The locus, designed Acp-2, is not expressed in erythrocytes but is expressed in all other tissues studied. The product of Acp-2 hydrolyzes a wide variety of phosphate monoesters and is inhibited by l(+)-tartaric acid. Inbred rat strains have fixed either allele Acp-2^a or allele Acp-2^b. Codominant expression is observed in the respective F₁ hybrids. Backcross progenies revealed the expected 1:1 segregation ratio. Possible loose linkage was found between the Acp-2 and the Pep-3 gene loci at a recombination frequency of 0.36±0.06.Supported by the Deutsche Forschungsgemeinschaft (Grant Be 352/15) and by a grant from the Alexander-von-Humboldt-Stiftung (VB2-FLF).     

Molecular cloning of the c2 locus of Zea mays, the gene coding for chalcone synthase

Summary The c2 locus of Zea mays, identified as one of the genes affecting anthocyanin biosynthesis, was cloned using the transposable element En (Spm) as a gene tag. The Spm element present at the c2 locus in the autonomously mutating c2-m1 line was isolated using En1 element specific probes. Sequences flanking the element were identified as c2 locus specific and were used to clone the nonautonomous c2-m2 and wild-type alleles. The cloning and analysis of a cDNA complementary to the c2 locus provided evidence that this gene encodes the enzyme chalcone synthase.     

Developmental profiles of three embryo-lethal maize mutants lacking leaf primordia: ptd*-1130, cp*-1418, and bno*-747B

The defective kernel (dek) mutants of maize are altered in both their embryo and endosperm development. Earlier studies have indicated that some of the dek mutants are unable to form shoot apical meristems or leaf primoirda. We have examined three embryo lethal dek mutants of this type, ptd*-1130, cp*-1418, and bno*-747B, to obtain a developmental profile for each. Allelism tests show that these three mutants are not allelic. Embryos were examined in early, mid-, and late kernel development as well as at kernel maturity by dissection and sectioning procedures and also at kernel maturity by scanning electron microscopy. All three mutants lag behind normal embryos in their rate of development. Embryos of ptd*-1130 reached the transition stage by early kernel development and progressed no further but underwent cell enlargement and necrosis during late kernel development. Embryos of cp*-1418 reached an early coleoptilar stage by midkernel development. They subsequently increased in size but did not form any leaf primordia. At kernel maturity, they no longer had a shoot apical meristem but often had a well formed root meristem. They appeared to remain healthy and did not become necrotic. Embryos of bno*747B reached the early coleoptilar stage by early kernel development but progressed no further. By kernel maturity, they had grown into masses of irregularly shaped embryonic tissue that no longer resembled any normal embryo stage but were not necrotic. None of these three mutants responded to attempts to support continued embryo development when cultured, but all three mutants formed callus on N6 and MS media supplemented with 2,4-D. These results indicate that these mutants are all uniformly blocked at specific stages early in embryonic development, have different subsequent developmental fates, and represent three different genes performing unique functions that are essential for embryogenesis.