In Vitro,In Silico,ADME and Theoretical Analysis of Mn(II) and Co(II) Complexes Derived from Methyl-(Z)-N′-Carbamothioylcarbamohydrazonate Schiff Base Ligand

Mn(II) and Co(II) complexes of methyl-(Z)−N′-carbamothioylcarbamohydrazonate Schiff base ligand were synthesized. The ligand and metal salts were taken in 2 : 1 stoichiometric ratio. All the synthesized complexes were characterized using elemental analysis, molar conductance, magnetic moment and various spectroscopic techniques (FT-IR, UV/VIS, EPR) techniques. Elemental and spectroscopic results verified bidentate donor nature of the ligand and octahedral geometry of all the complexes. The non-electrolytic nature of Mn(II) and Co(II) complexes were suggested by conductivity data analysis. In vitro antibacterial (E. coli and S. aureus) and antifungal (C. albicans and C. tropicalis) screening were achieved by employing agar well diffusion method which revealed better antimicrobial activity of Co(II) complexes than Mn(II) complexes. In silico SwissADME study predicted the drug-likeness probability of ligand and complexes. The interaction of two bacterial proteins (E. coli and S. aureus) with compounds was also analyzed using molecular docking study, which corroborate the in vitro analysis.     

Steel Anti-Corrosion Strategy Enables Long-Cycle Zn Anode

The progress of aqueous zinc batteries (AZBs) is limited by the poor cycling life due to Zn anode instability, including dendrite growth, surface corrosion, and passivation. Inspired by the anti-corrosion strategy of steel industry, a compounding corrosion inhibitor (CCI) is employed as the electrolyte additive for Zn metal anode protection. It is shown that CCI can spontaneously generate a uniform and ≈30 nm thick solid-electrolyte interphase (SEI) layer on Zn anode with a strong adhesion via Zn O bonding. This SEI layer efficiently prohibits water corrosion and guides homogeneous Zn deposition without obvious dendrite formation. This enables reversible Zn deposition and dissolution for over 1100 h under the condition of 1 mA cm⁻² and 1 mAh cm⁻² in symmetric cells. The Zn-MnO₂ full cells with CCI-modified electrolyte deliver an ultralow capacity decay rate (0.013% per cycle) at 0.5 A g⁻¹ over 1000 cycles. Such an innovative strategy paves a low-cost way to achieve AZBs with long lifespan.     

Engineered nickel bioaccumulation in Escherichia coli by NikABCDE transporter and metallothionein overexpression

Mine wastewater often contains dissolved metals at concentrations too low to be economically extracted by existing technologies, yet too high for environmental discharge. The most common treatment is chemical precipitation of the dissolved metals using limestone and subsequent disposal of the sludge in tailing impoundments. While it is a cost-effective solution to meet regulatory standards, it represents a lost opportunity. In this study, we engineered Escherichia coli to overexpress its native NikABCDE transporter and a heterologous metallothionein to capture nickel at concentrations in local effluent streams. We found the engineered strain had a 7-fold improvement in the bioaccumulation performance for nickel compared to controls, but also observed a drastic decrease in cell viability due to metabolic burden or inducer (IPTG) toxicity. Growth kinetic analysis revealed the IPTG concentrations used based on past studies lead to growth inhibition, thus delineating future avenues for optimization of the engineered strain and its growth conditions to perform in more complex environments.     

Submitochondrial particles asin vitro biosensors of heavy metal toxicity

The effects on mitochondrial respiratory parameters of heavy metals, such as Cu, Ni, Pb, Cd, Zn, Ag, Hg, were recorded by using thein vitro response of submitochondrial particles (SMP) from beef heart mitochondria.The toxicity of these elements was estimated by determining their effects on the energy-coupled reverse electron transfer (RET), which is induced by ATP and succinate at first site level of the respiratory chain in SMP.The RET rate was easily monitored by recording spectrophotometrically at 340 nm the production of NADH, arising from the reduction of exogenous NAD⁺ by RET.The toxicity values were expressed as the toxicant molar concentration which decreases the rate of reduction of NAD⁺ to an extent of 50 percent (EC50). The toxicity increased in the following order: Ni²⁺2+2+< Cd²⁺2+2++.The SMP data were compared with the toxicity values obtained from a variety of biological systems currently used for toxicity testing. The results obtained demonstrate that the SMP test generally provides a good estimate of metal toxicity for several fish and invertebrate species. This is demonstrated by the statistical parameters obtained in the regression analysis. The broadened 95% confidence intervals and, in particular, the poor correlations obtained for some aquatic organisms can be ascribed to the more complex metabolic interactions and competing toxic pathways in aquatic organisms, when compared to SMP.     

Formation of dioxygen complexes of transition metal chelates in oxygen saturated aprotic solvents. Cyclic voltammetric evidence at a micro glassy carbon disk electrode

Cyclic voltammetry at a micro electrode of Co(II) salen, Fe(II) salen, electrode generated Fe(II)(acac)₂, Fe(II) (salicylaldehyde)₂, Fe(II) (salicylaldoxime)₂, Fe(II) (bipy)₃, Fe(II) (bipy)₂, Co(II) (bipy)₃, Co(II) (benzacac)₂, and electrode generated Co(acac)₂ in oxygen saturated aprotic solvents show positive shift of the O₂ sigmoidal wave, as well as enhancement of the limiting current in the case of the first five compounds. In the case of Co(II) (bipy)₃ the slope of the sigmoidal wave due to O₂ becomes more positive, while for the other two Co(II) complexes there is no change except a small decrease in the wave height. The data are used to correlate and predict the O₂ binding properties of the chelates in solution. The data for the diketone complexes of Co(II) indicate absence of any direct association, which is in line with the interpretation offered in the literature on the mechanism of their catalytic role in the O₂ oxidation of substrates. The mechanism of the autoxidation of dimethylformamide in the presence of Fe(III) (bipy)₃ and Cu(II) (bipy)₂ is elucidated by the observation that these higher valent compounds are reduced to their next lower oxidation state by DMF.     

Theoretical Study of the TiO2 and MgO Surface Acidity and the Adsorption of Acids and Bases

We present ab-initio periodic Hartree–Fock calculations (crystal program) of small molecules on TiO₂ and MgO. The adsorption of the molecules may be molecular or dissociative. This depends on their acid and basic properties in the gas phase. For the molecular adsorption, the molecules are adsorbed as bases on Ti(+IV) sites, the adsorption energies correlate with the proton affinities. The dissociations on the surface correlate with the gas phase cleavages: thus, the dissociation of MeOH leads to a preferential basic cleavage (the fragment HO– is adsorbed on a Ti⁺⁴ ion and the fragment Me⁺ is adsorbed on a O²– ion of the oxide). The opposite result is obtained with MeSH. Another important factor is the adsorbate–adsorbate interaction: favorable cases are a sequence of H-bonds for the hydroxyl groups resulting from the water dissociation and the mode of adsorption for the ammonium ions. Lateral interactions also force the adsorbed CO₂ molecules to bend over the surface so that their mutual orientation resembles the geometry of the CO₂ dimer. With respect to water adsorption, MgO appears to be a basic oxide. As experimentally observed, NH₃ adsorbs preferentially on TiO₂ and CO₂ on MgO. However, this difference of reactivity should not be expressed in terms of acid vs. basic behaviour but in terms of hard and soft acidity. The MgO surface is a 'soft' acidic surface that reacts preferentially with the soft base, CO₂.     

Amino-modified silicate gels prepared by sol-gel processing as metal-ion sorbents

Two series of amino-modified silicate gels prepared by sol-gel processing were used to absorb Cu(II), Ni(II), Co(II), Mn(II) and Cr(III) from aqueous solutions. These easily prepared sorbents with various content of primary amino groups in series (A) or primary and secondary amino groups in series (AA) have reasonable stability. The gel composition, time and concentration dependence of the uptake of the metal ions by these materials were studied systematically. These materials would be further used as supports to disperse catalytically active phases by conventional wet chemical procedures. Apart from this they demonstrate potential for the preconcentration aid for transition metal analysis.     

Structural analysis of zinc substitutions in the active site of thermolysin.

Native thermolysin binds a single catalytically essential zinc ion that is tetrahedrally coordinated by three protein ligands and a water molecule. During catalysis the zinc ligation is thought to change from fourfold to fivefold. Substitution of the active-site zinc with Cd2+, Mn2+, Fe2+, and Co2+ alters the catalytic activity (Holmquist B, Vallee BL, 1974, J Biol Chem 249:4601-4607). Excess zinc inhibits the enzyme. To investigate the structural basis of these changes in activity, we have determined the structures of a series of metal-substituted thermolysins at 1.7-1.9 A resolution. The structure of the Co(2+)-substituted enzyme is shown to be very similar to that of wild type except that two solvent molecules are liganded to the metal at positions that are thought to be occupied by the two oxygens of the hydrated scissile peptide in the transition state. Thus, the enhanced activity toward some substrates of the cobalt-relative to the zinc-substituted enzyme may be due to enhanced stabilization of the transition state. The ability of Zn2+ and Co2+ to accept tetrahedral coordination in the Michaelis complex, as well as fivefold coordination in the transition state, may also contribute to their effectiveness in catalysis. The Cd(2+)- and Mn(2+)-substituted thermolysins display conformational changes that disrupt the active site to varying degrees and could explain the associated reduction of activity. The conformational changes involve not only the essential catalytic residue, Glu 143, but also concerted side-chain rotations in the adjacent residues Met 120 and Leu 144. Some of these side-chain movements are similar to adjustments that have been observed previously in association with the "hinge-bending" motion that is presumed to occur during catalysis by the zinc endoproteases. In the presence of excess zinc, a second zinc ion is observed to bind at His 231 within 3.2 A of the zinc bound to native thermolysin, explaining the inhibitory effect.     

Escherichia coli alkaline phosphatase: X-ray structural studies of a mutant enzyme (His-412-->Asn) at one of the catalytically important zinc binding sites.

The X-ray structure of a mutant version of Escherichia coli alkaline phosphatase (H412N) in which His-412 was replaced by Asn has been determined at both low (-Zn) and high (+Zn) concentrations of zinc. In the wild-type structure, His-412 is a direct ligand to one of the two catalytically critical zinc atoms (Zn1) in the active site. Characterization of the H412N enzyme in solution revealed that the mutant enzyme required high concentrations of zinc for maximal activity and for high substrate and phosphate affinity (Ma L, Kantrowitz ER, 1994, J Biol Chem 269:31614-31619). The H412N enzyme was also inhibited by Tris, in contrast to the wild-type enzyme, which is activated more than twofold by 1 M Tris. To understand these kinetic properties at the molecular level, the structure of the H412N (+Zn) enzyme was refined to an R-factor of 0.174 at 2.2 A resolution, and the structure of the H412N(-Zn) enzyme was refined to an R-factor of 0.166 at a resolution of 2.6 A. Both indicated that the Asn residue substituted for His-412 did not coordinate well to Zn1. In the H412N(-Zn) structure, the Zn1 site had very low occupancy and the phosphate was shifted by 1.8 A from its position in the wild-type structure. The Mg binding site was also affected by the substitution of Asn for His-412. Both structures of the H412N enzyme also revealed a surface-accessible cavity near the Zn1 site that may serve as a binding site for Tris.(ABSTRACT TRUNCATED AT 250 WORDS)     

Establishing isostructural metal substitution in metalloproteins using 1H NMR, circular dichroism, and Fourier transform infrared spectroscopy.

Far-UV CD, 1H-NMR, and Fourier transform infrared (FTIR) spectroscopy are three of the most commonly used methods for the determination of protein secondary structure composition. These methods are compared and evaluated as a means of establishing isostructural metal substitution in metalloproteins, using the crystallographically defined rubredoxin from Desulfovibrio gigas and its well-characterized cadmium derivative as a model system. It is concluded that analysis of the FTIR spectrum of the protein amide I resonance represents the most facile and generally applicable method of determining whether the overall structure of a metalloprotein has been altered upon metal reconstitution. This technique requires relatively little biological material (ca. 300 micrograms total protein) and, unlike either CD or 1H-NMR spectroscopy, is unaffected by the presence of different metal ions, thus allowing the direct comparison of FTIR spectra before and after metal substitution.