The influence of aquatic surface respiration (ASR) on cardio-respiratory function of the serrasalmid fish Piaractus mesopotamicus

When exposed to severely hypoxic water, many teleosts skim the better oxygenated surface layer (aquatic surface respiration, ASR). Information is scarce concerning the thresholds triggering ASR and its cardio-respiratory consequences. To assess the ambient conditions leading to ASR and to evaluate its effects on cardio-respiratory function, we exposed specimens of Piaractus mesopotamicus to gradual hypoxia (water oxygen tension ranging from 120 to 10 torr) with or, alternatively, without access to the surface. Concurrently, ASR, cardiac and respiratory frequencies, O₂ uptake and gill ventilation were monitored. With surface access, ASR developed below the critical tension for O₂ uptake (34 torr) by normal gill ventilation. Moreover, the time spent in ASR increased with prolonged hypoxic exposure to a maximum of 95% of total time. Without surface access, the species exhibited hypoxic bradycardia, that had not occurred in the group with fully developed ASR. Even without ASR, P. mesopotamicus recovered readily from hypoxic exposure, showing that this species possesses a number of mechanisms to cope with environmental hypoxia.     

Dependence of alignment direction on magnitude of strain in esophageal smooth muscle cells

The response of cells in vitro to mechanical forces has been the subject of much research using devices to exert controlled mechanical stimulation on cultured cells or isolated tissue. In this study, esophageal smooth muscle cells were seeded on flexible polyurethane membranes to form a confluent cell layer. The cells were then subjected to uniform cyclic stretch of varying magnitudes at a frequency of approximately five cycles per minute in a custom made mechatronic bioreactor, providing similar strains experienced in the in vivo mechanical environment of the esophagus. The results show that the orientation response is dependent on the magnitude of cyclic stretch applied. Smooth muscle cells showed parallel alignment to the force direction at low cyclic strains (2%) compared to the hill‐valley morphology of static controls. At higher strains (5% and 10% magnitude), the cells exhibited a consistent alignment perpendicular to the strain. To our knowledge, this is the first time that the alignment direction's dependence on strain magnitude has been demonstrated. MTS analysis indicated that cell metabolism was reduced when mechanical strain was applied, and proliferation was inhibited by mechanical strain. Protein expression indicates a decrease in smooth muscle α‐actin, indicative of changes in cell phenotype, an increase in vimentin, which is associated with increased cell motility, and an increase in desmin, indicating differentiation in stimulated cells. Biotechnol. Bioeng. 2009;102: 1703–1711. © 2008 Wiley Periodicals, Inc.     

Effect of Heliothis subflexa herbivory on fruit abscission by Physalis species: the roles of mechanical damage and chemical factors

1. Insect oral secretions are important for the induction of a number of plant responses, but the relative role of mechanical damage in the induction of these responses is often not well understood. Damage from the frugivore Heliothis subflexa, a specialist on Physalis species, causes herbivore‐induced fruit abscission. In this field study, we examined the separate and combined effects of mechanical damage and H. subflexa oral secretions on Physalis fruit abscission. 2. To determine the relative role of mechanical and chemical factors, the following treatments were administered to fruit: (1) three levels of mechanical damage, (2) natural herbivore damage by control larvae and by larvae surgically treated to inhibit saliva secretion, and (3) injection of H.subflexa oral secretions and a water control. Abscission of mechanically damaged fruit with and without the addition of oral secretions was also compared. 3. Mechanical damage was sufficient to cause fruit abscission, and the addition of oral secretions to mechanically damaged fruit did not cause an increase in fruit abscission. Normal caterpillars and those treated to inhibit saliva secretion caused similar abscission rates. 4. Though most studies examining the effects of insect oral secretions on induced plant responses find these chemical stimuli to be important or essential, the results of the present study showed that oral secretions are not necessary for fruit abscission. Future work is needed to determine the relative importance of mechanical damage in herbivore‐induced plant responses in other systems.     

Dynamic 3D culture: Models of chondrogenesis and endochondral ossification

The formation of cartilage from stem cells during development is a complex process which is regulated by both local growth factors and biomechanical cues, and results in the differentiation of chondrocytes into a range of subtypes in specific regions of the tissue. In fetal development cartilage also acts as a precursor scaffold for many bones, and mineralization of this cartilaginous bone precursor occurs through the process of endochondral ossification. In the endochondral formation of bones during fetal development the interplay between cell signalling, growth factors, and biomechanics regulates the formation of load bearing bone, in addition to the joint capsule containing articular cartilage and synovium, generating complex, functional joints from a single precursor anlagen. These joint tissues are subsequently prone to degeneration in adult life and have poor regenerative capabilities, and so understanding how they are created during development may provide useful insights into therapies for diseases, such as osteoarthritis, and restoring bone and cartilage lost in adulthood. Of particular interest is how these tissues regenerate in the mechanically dynamic environment of a living joint, and so experiments performed using 3D models of cartilage development and endochondral ossification are proving insightful. In this review, we discuss some of the interesting models of cartilage development, such as the chick femur which can be observed in ovo, or isolated at a specific developmental stage and cultured organotypically in vitro. Biomaterial and hydrogel‐based strategies which have emerged from regenerative medicine are also covered, allowing researchers to make informed choices on the characteristics of the materials used for both original research and clinical translation. In all of these models, we illustrate the essential importance of mechanical forces and mechanotransduction as a regulator of cell behavior and ultimate structural function in cartilage. Birth Defects Research (Part C) 105:19–33, 2015. © 2015 Wiley Periodicals, Inc.     

Effect of adding nano‐titanium dioxide on the microstructure,mechanical properties and in vitro bioactivity of a freeze cast merwinite scaffold

In the present research, merwinite (M) scaffolds with and without nano‐titanium dioxide (titania) were synthesized by water‐based freeze casting method. Two different amounts (7.5 and 10 wt%) of n‐TiO₂ were added to M scaffolds. They were sintered at temperature of 1573.15°K and at cooling rate of 4°K/min. The changes in physical and mechanical properties were investigated. The results showed that although M and M containing 7.5 wt% n‐TiO₂ (MT7.5) scaffolds had approximately the same microstructures in terms of pore size and wall thickness, these factors were different for sample MT10. In overall, the porosity, volume and linear shrinkage were decreased by adding different weight ratios of n‐TiO₂ into the M structure. According to the obtained mechanical results, the optimum mechanical performance was related to the sample MT7.5 (E = 51 MPa and σ = 2 MPa) with respect to the other samples, i.e.: M (E = 47 MPa and σ = 1.8 MPa) and MT10 (E = 32 MPa and σ = 1.4 MPa). The acellular in vitro bioactivity experiment confirmed apatite formation on the surfaces of all samples for various periods of soaking time. Based on cell study, the sample which possessed favorable mechanical behavior (MT7.5) supported attachment and proliferation of osteoblastic cells. These results revealed that the MT7.5 scaffold with improved mechanical and biological properties could have a potential to be used in bone substitute. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:550–556, 2015     

Structure-function relationships in pulmonary surfactant membranes: From biophysics to therapy

Pulmonary surfactant is an essential lipid–protein complex to maintain an operative respiratory surface at the mammalian lungs. It reduces surface tension at the alveolar air–liquid interface to stabilise the lungs against physical forces operating along the compression–expansion breathing cycles. At the same time, surfactant integrates elements establishing a primary barrier against the entry of pathogens. Lack or deficiencies of the surfactant system are associated with respiratory pathologies, which treatment often includes supplementation with exogenous materials. The present review summarises current models on the molecular mechanisms of surfactant function, with particular emphasis in its biophysical properties to stabilise the lungs and the molecular alterations connecting impaired surfactant with diseased organs. It also provides a perspective on the current surfactant-based strategies to treat respiratory pathologies. This article is part of a Special Issue entitled: Membrane Structure and Function: Relevance in the Cell's Physiology, Pathology and Therapy.     

Controlling network topology and mechanical properties of co‐assembling peptide hydrogels

Oligopeptides are well‐known to self‐assemble into a wide array of nanostructures including β‐sheet‐rich fibers that when present above a critical concentration become entangled and form self‐supporting hydrogels. The length, quantity, and interactions between fibers influence the mechanical properties of the hydrogel formed and this is typically achieved by varying the peptide concentration, pH, ionic strength, or the addition of a second species or chemical cross‐linking agent. Here, we outline an alternative, facile route to control the mechanical properties of the self‐assembling octa‐peptide, FEFEFKFK (FEKII); simply doping with controlled quantities of its double length peptide, FEFEFKFK‐GG‐FKFKFEFE (FEKII18). The structure and properties of a series of samples were studied here (0–100 M% of FEKII18) using Fourier transform infrared, small angle X‐ray scattering, transmission electron microscopy, and oscillatory rheology. All samples were found to contain elongated, flexible fibers and all mixed samples contained Y‐shaped branch points and parallel fibers which is attributed to the longer peptide self‐assembling within two fibers, thus creating a cross‐link in the network structure. Such behavior was reflected in an increase in the elasticity of the mixed samples with increasing quantity of double peptide. Interestingly the elastic modulus increased up to 30 times the pure FEKII value simply by adding 28 M% of FEKII18. These observations provide an easy, off‐the‐shelf method for an end‐user to control the cross‐linked network structure of the peptide hydrogel, and consequently strength of the hydrogel simply by physically mixing pre‐determined quantities of two similar peptide molecules. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 669–680, 2014.     

G‐fibres in storage roots of Trifolium pratense (Fabaceae): tensile stress generators for contraction

Root contraction has been described for many species within the plant kingdom for over a century, and many suggestions have been made for mechanisms behind these contractions. To move the foliage buds deeper into the soil, the proximal part of the storage root of Trifolium pratense contracts by up to 30%. Anatomical studies have shown undeformed fibres next to strongly deformed tissues. Raman imaging revealed that these fibres are chemically and structurally very similar to poplar (Populus) tension wood fibres, which are known to generate high tensile stresses and bend leaning stems or branches upright. Analogously, an almost pure cellulosic layer is laid down in the lumen of certain root fibres, on a thin lignified secondary cell wall layer. To reveal its stress generation capacities, the thick cellulosic layer, reminiscent of a gelatinous layer (G‐layer) in tension wood, was selectively removed by enzymatic treatment. A substantial change in the dimensions of the isolated wood fibre bundles was observed. This high stress relaxation indicates the presence of high tensile stress for root contraction. These findings indicate a mechanism of root contraction in T. pratense (red clover) actuated via tension wood fibres, which follows the same principle known for poplar tension wood.     

Macro-/Micro-Structures of Elytra, Mechanical Properties of the Biomaterial and the Coupling Strength Between Elytra in Beetles

Macro-/Micro-structures and mechanical properties of the elytra of beetles were studied. The Scan Electron Microscope (SEM) and optical microscopy were employed to observe the macro-/micro-structure of the surface texture and cross-section structure of elytra. Nano-indentation was carried out to measure the elastic modulus and the hardness of elytra. Tensile strengths of elytra in lateral and longitudinal directions were measured by a muhifunctional testing machine. The coupling force between elytra was also measured and the clocking mechanism was studied. SEM images show the similar geometric structure in transverse and longitudinal sections and multilayer-dense epicuticle and exocuticle, followed by bridge piers with a helix structured fibers, which connect the exocuticle to the endodermis, and form an ellipse empty to reduce the structure weight. The elastic modulus and the hardness are topologically distributed and the mechanical parameters of fresh elytra are much higher than those of dried elytra. The tensile strength of the fresh biological material is twice that of dried samples, but there is no clear difference between the data in lateral and longitudinal directions. Coupling forces measured are 6.5 to 160 times of beetles' bodyweight, which makes the scutellum very important in controlling the open and close of the elytra. The results provide a biological template to inspire lightweight structure design for aerospace engineering.