Environmentally induced post‐spin property changes in spider silks: influences of web type,spidroin composition and ecology

Many spiders use silk to construct webs that must function for days at a time, whereas many other species renew their webs daily. The mechanical properties of spider silk can change after spinning under environmental stress, which could influence web function. We hypothesize that spiders spinning longer‐lasting webs produce silks composed of proteins that are more resistant to environmental stresses. The major ampullate (MA) silks of orb web spiders are principally composed of a combination of two proteins (spidroins) called MaSp1 and MaSp2. We expected spider MA silks dominated by MaSp1 to have the greatest resistance to post‐spin property change because they have high concentrations of stable crystalline β‐sheets. Some orb web spiders that spin three‐dimensional orb webs, such as Cyrtophora, have MA silks that are predominantly composed of MaSp1. Hence, we expected that the construction of three‐dimensional orb webs might also coincide with MA silk resistance to post‐spin property change. Alternatively, the degree of post‐spin mechanical property changes in different spider silks may be explained by factors within the spider's ecosystem, such as exposure to solar radiation. We exposed the MA silks of ten spider species from five genera (Nephila, Cyclosa, Leucauge, Cyrtophora, and Argiope) to ecologically high temperatures and low humidity for 4 weeks, and compared the mechanical properties of these silks with unexposed silks. Using species pairs enabled us to assess the influence of web dimensionality and MaSp composition both with and without phylogenetic influences being accounted for. We found neither the MaSp composition nor the three‐dimensionality of the orb web to be associated with the degree of post‐spin mechanical property changes in MA silk. The MA silks in Leucauge spp. are dominated by MaSp2, which we found to have the least resistance to post‐spin property change. The MA silk in Argiope spp. is also dominated by MaSp2, but has high resistance to post‐spin property change. The ancestry of Argiope is unresolved, but it is largely a tropical genus inhabiting hot, open regions that present similar stressors to silk as those of our experiment. Ecological factors thus appear to influence the vulnerability of orb web spider MA silks to post‐spin property change. © 2012 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 106 , 580–588.     

Piezo1: Properties of a cation selective mechanical channel

Piezo ion channels have been found to be essential for mechanical responses in cells. These channels were first shown to exist in Neuro2A cells, and the gene was identified by siRNAs that diminished the mechanical response. Piezo channels are approximately 2500 amino acids long, have between 24–32 transmembrane regions, and appear to assemble into tetramers and require no other proteins for activity. They have a reversal potential around 0 mV and show voltage dependent inactivation. The channel is constitutively active in liposomes, indicating that no cytoskeletal elements are required. Heterologous expression of the Piezo protein can create mechanical sensitivity in otherwise insensitive cells. Piezo1 currents in outside-out patches were blocked by the extracellular MSC inhibitor peptide GsMTx4. Both enantiomeric forms of GsMTx4 inhibited channel activity in a manner similar to endogenous mechanical channels. Piezo1 can adopt a tonic (non-inactivating) form with repeated stimulation. The transition to the non-inactivating form generally occurs in large groups of channels, indicating that the channels exist in domains, and once the domain is compromised, the members simultaneously adopt new properties. Piezo proteins are associated with physiological responses in cells, such as the reaction to noxious stimulus of Drosophila larvae. Recent work measuring cell crowding, shows that Piezo1 is essential for the removal of extra cells without apoptosis. Piezo1 mutations have also been linked to the pathological response of red blood cells in a genetic disease called Xerocytosis. These finding suggest that Piezo1 is a key player in cells’ responses to mechanical stimuli.     

Postproduction Processing of Electrospun Fibres for Tissue Engineering

Electrospinning is a commonly used and versatile method to produce scaffolds (often biodegradable) for 3D tissue engineering.^{1, 2, 3} Many tissues in vivo undergo biaxial distension to varying extents such as skin, bladder, pelvic floor and even the hard palate as children grow. In producing scaffolds for these purposes there is a need to develop scaffolds of appropriate biomechanical properties (whether achieved without or with cells) and which are sterile for clinical use. The focus of this paper is not how to establish basic electrospinning parameters (as there is extensive literature on electrospinning) but on how to modify spun scaffolds post production to make them fit for tissue engineering purposes - here thickness, mechanical properties and sterilisation (required for clinical use) are considered and we also describe how cells can be cultured on scaffolds and subjected to biaxial strain to condition them for specific applications.Electrospinning tends to produce thin sheets; as the electrospinning collector becomes coated with insulating fibres it becomes a poor conductor such that fibres no longer deposit on it. Hence we describe approaches to produce thicker structures by heat or vapour annealing increasing the strength of scaffolds but not necessarily the elasticity. Sequential spinning of scaffolds of different polymers to achieve complex scaffolds is also described. Sterilisation methodologies can adversely affect strength and elasticity of scaffolds. We compare three methods for their effects on the biomechanical properties on electrospun scaffolds of poly lactic-co-glycolic acid (PLGA).Imaging of cells on scaffolds and assessment of production of extracellular matrix (ECM) proteins by cells on scaffolds is described. Culturing cells on scaffolds in vitro can improve scaffold strength and elasticity but the tissue engineering literature shows that cells often fail to produce appropriate ECM when cultured under static conditions. There are few commercial systems available that allow one to culture cells on scaffolds under dynamic conditioning regimes - one example is the Bose Electroforce 3100 which can be used to exert a conditioning programme on cells in scaffolds held using mechanical grips within a media filled chamber.⁴ An approach to a budget cell culture bioreactor for controlled distortion in 2 dimensions is described. We show that cells can be induced to produce elastin under these conditions. Finally assessment of the biomechanical properties of processed scaffolds cultured with or without cells is described.     

Roller Chopping Effectively Reduces Shrub Cover and Density in Pine Flatwoods

Changes to fire regimes have resulted in excessive shrub growth and declines in the species rich herbaceous ground layer of pyric savanna and grassland systems worldwide, including the pine flatwoods of the Southern Coastal Plain of the United States. Prescribed burning and roller chopping during growing (April–October) and dormant (November–March) seasons are management practices promoted to reduce shrub invasion and increase herbaceous plant growth in flatwoods. However, relatively little is known about the seasonal effects these activities have on shrubs and herbaceous vegetation. We assessed the effects of prescribed burning and roller chopping on herbaceous and shrub characteristics in pine flatwoods and explored how grazing may mediate these treatments. We used a paired design, with comparison made between sampling locations randomly located within treated (e.g. burned) and adjacent untreated areas. Growing season burning was more effective at reducing shrub cover and height than dormant season burning. However, shrub re‐growth occurred the second year post‐burn. Roller chopping and roller chopping/burning combinations led to decreases in shrub cover and height for 2 years post‐treatment. Decreases in shrub density were seen on sites subject to growing season roller chopping and grazing. Decreases in herbaceous vegetation were observed following all treatments, possibly the result of grazing. If reductions in shrub density are required, growing season roller chopping in combination with grazing may be the only effective treatment. However, initial deferment from grazing following burning and roller chopping treatments may be necessary to permit re‐establishment and growth of forbs and graminoids.     

新生儿呼吸机相关性肺炎临床分析与防治对策

目的探讨新生儿呼吸机相关性肺炎的临床特点以及防治措施。方法59例患儿使用呼吸机机械通气进行治疗,分析与呼吸机相关性肺炎发生率情况、病原学检查结果、药敏试验结果以及转归情况。结果与呼吸机相关性肺炎者有30例,发生率为50．85％。从下呼吸道分泌物培养或管端培养出细菌29例。分析了病原菌种类与所占的比例,并给出了药敏试验结果。两组患儿治愈率相比具有统计学差异。结论采取综合的防治措施是降低呼吸机相关性肺炎发生的最佳方法。     

Extensive conformational transitions are required to turn on ATP hydrolysis in myosin

Conventional myosin is representative of biomolecular motors in which the hydrolysis of adenosine triphosphate (ATP) is coupled to large-scale structural transitions both in and remote from the active site. The mechanism that underlies such “mechanochemical coupling,” especially the causal relationship between hydrolysis and allosteric structural changes, has remained elusive despite extensive experimental and computational analyses. In this study, using combined quantum mechanical and molecular mechanical simulations and different conformations of the myosin motor domain, we provide evidence to support that regulation of ATP hydrolysis activity is not limited to residues in the immediate environment of the phosphate. Specifically, we illustrate that efficient hydrolysis of ATP depends not only on the proper orientation of the lytic water but also on the structural stability of several nearby residues, especially the Arg238-Glu459 salt bridge (the numbering of residues follows myosin II in Dictyostelium discoideum) and the water molecule that spans this salt bridge and the lytic water. More importantly, by comparing the hydrolysis activities in two motor conformations with very similar active-site (i.e., Switches I and II) configurations, which distinguished this work from our previous study, the results clearly indicate that the ability of these residues to perform crucial electrostatic stabilization relies on the configuration of residues in the nearby N-terminus of the relay helix and the “wedge loop.” Without the structural support from those motifs, residues in a closed active site in the post-rigor motor domain undergo subtle structural variations that lead to consistently higher calculated ATP hydrolysis barriers than in the pre-powerstroke state. In other words, starting from the post-rigor state, turning on the ATPase activity requires not only displacement of Switch II to close the active site but also structural transitions in the N-terminus of the relay helix and the “wedge loop,” which have been proposed previously to be ultimately coupled to the rotation of the converter subdomain 40 Å away.     

Phenotypic plasticity in response to mechanical stress: hydrodynamic performance and fitness of four aquatic plant species

Plastic responses of plants exposed to mechanical stress can lead to modified, performance-enhancing, morphologies, sometimes accompanied by costs to reproduction. The capacity to present short-term plastic responses to current stress, the resulting performance (expected lower mechanical forces), and the costs of such responses to reproduction were tested for four aquatic plant species. Two ramets of the same genet were submitted to running vs standing water treatment. Traits describing the morphology, hydrodynamic performance and reproduction (sexual and vegetative) were measured. For one species, plastic responses led to reduced hydrodynamic forces, without apparent costs to reproduction, indicating that the plastic response could be beneficial for plant maintenance in stressful habitats. For two species, plastic responses were not associated with variations in performance and reproduction, possibly because of the low hydrodynamic forces experienced, even for morphologies produced under standing conditions. For one species, plastic responses were associated with a sharp decrease in sexual reproduction, without variations in performance, revealing the negative impact of currents over a short time scale. Species maintenance is linked to the capacity of individuals to tolerate mechanical forces. The contrasting responses to currents may be a key element for predicting community dynamics.     

Towards a new attenuating compound: a potentiometric, spectrophotometric and NMR equilibrium study on Fe(III), Al(III) and a new tetradentate mixed bisphosphonate-hydroxypyridinonate ligand

Coordination properties toward Fe(III) and Al(III) of a mixed bisphosphonate-hydroxypyridinonate ligand are presented. Potentiometric, spectrophotometric and NMR results allowed to conclude that Fe(III) and Al(III) coordination takes place on the pyridinone moiety. The high steric hindrance prevents the possibility of simultaneous coordination of both groups to the same metal ion. Quantum mechanical calculations confirm this finding allowing to determine the minimal length of the linker necessary for a stable conformation of complexes in which Fe(III) is coordinated both by pyridinone and bisphosphonate groups.     

Herbivore arthropods benefit from vectoring plant viruses

Plants infected with pathogens often attract the pathogens’ vectors, but it is not clear if this is advantageous to the vectors. We therefore quantified the direct and indirect (through the host plant) effects of a pathogen on its vector. A positive direct effect of the plant‐pathogenic Tomato spotted wilt virus on its thrips vector (Frankliniella occidentalis) was found, but the main effect was indirect; juvenile survival and developmental rate of thrips was lower on pepper plants that were damaged by virus‐free thrips than on unattacked plants, but such negative effects were absent on plants that were damaged and inoculated by infected thrips or were mechanically inoculated with the virus. Hence, potential vectors benefit from attacking plants with virus because virus‐infected plants are of higher quality for the vector's offspring. We propose that plant pathogens in general have evolved mechanisms to overcome plant defences against their vectors, thus promoting pathogen spread.     

Effects of soil compaction and mechanical damage at harvest on growth and biomass production of short rotation coppice willow

The effects of soil compaction and mechanical damage to stools at harvesting on the growth and biomass production of short rotation coppice (SRC) of willow (Salix viminalis L.) were monitored on clay loam (CL) and sandy loam (SL) soils. Moderate compaction, more typical of current harvesting situations did not reduce biomass yields significantly. Even heavy compaction only reduced stem biomass production by about 12% overall; effects were statistically significant only in the first year of the experiment on sandy loam. Heavy compaction increased soil strength and bulk density down to 0.4 m depth and reduced soil available water and root growth locally. Soil loosening treatments designed to alleviate the effects of heavy compaction did not markedly improve the growth of willow on compacted plots. Hence the focus fell on harvesting. Extensive mechanical damage to stools caused a 9% and 21% reduction in stem dry mass on the clay loam and sandy loam soils as a result of fewer stems being produced. The particularly severe effect on the sandy loam soil probably resulted from a combination of dry conditions in the year of treatment, root damage and soil compaction under stools and might have been aggravated by the young age of the plants (1 year) at the time of treatment.