Identification of Pip4k2β as a mechanical stimulus responsive gene and its expression during musculoskeletal tissue healing

To investigate the mechano-transduction system of cells, we identified genes responsive to a cyclic mechanical stimulus. MC3T3.E1 cells were cultured on a computer-controlled vacuum-pump-operated device designed to provide a cyclic mechanical stimulus. A maximum elongation of 15% of membrane at 10 cycles/min (3 s extension followed by 3 s relax per cycle) was repeated for 48 h. By means of a differential display, the gene expression pattern of cells exposed to the stimulus was compared with that of unexposed cells. As a result, a gene fragment that was exclusively expressed in mechanically stressed cells was identified. By using expressed sequence tag walking together with the oligo-capping method, this gene was identified as phosphatidylinositol 4-phosphate 5-kinase type II β (initially known as Pip5k2β but now reclassified as Pip4k2β). The specific up-regulation of Pip4k2β upon mechanical stimulus was also confirmed by using another apparatus, viz. a computer-controlled linearized-stepping motor system. To examine the involvement of the cyclic mechanical stimulus in the regulation of Pip4k2β expression in musculoskeletal tissue, we created an Achilles tendon transection model in rabbits. The temporal expression of Pip4k2β was assessed by means of a quantitative reverse-transcribed polymerase chain reaction. In the gastrocnemius muscle, expression of Pip4k2β rapidly decreased 1 week after transection but was restored to normal levels at 4 weeks. In the Achilles tendon, however, expression remained decreased until 4 weeks after transection. We suggest that the expression of Pip4k2β can be used as a marker for cells receiving a suitable mechanical stimulus. This study was supported by a Grant-in-Aid for Scientific Research from the Ministry of Education, Science, Sports and Culture of Japan.     

A rat model of bone cancer pain induced by intra-tibia inoculation of Walker 256 mammary gland carcinoma cells

This study described a modified rat model of bone cancer pain. Syngeneic Walker 256 mammary gland carcinoma cells were injected into the tibia medullary cavity via intercondylar eminence. Series of tests were carried out including bone radiology, bone histology, ambulatory pain, thermal hyperalgesia, mechanical allodynia, weight bearing ability, and electrophysiological recording from primary afferent fibers. The rats inoculated with carcinoma cells showed significant ambulatory pain, mechanical allodynia, and reduction in weight bearing, as well as increased incidence of spontaneous activity in Abeta fibers in affected limb, whereas PBS (vehicle) or heat-killed cells (sham) injected rats showed no significant difference in comparison to normal rats. The pain hypersensitive behaviors were aggravated with time and destruction of bone. Interestingly, mechanical allodynia was also observed in the contralateral limb, indicating the involvement of 'mirror image' pain in bone cancer pain. In summary, the present study provided a useful and easily established rat model of bone cancer pain which will contribute to further study of the mechanisms underlying cancer pain.     

Alginate-chitosan complex coacervation for cell encapsulation: effect on mechanical properties and on long-term viability

The use of chitosan in complexation with alginate appears to be a promising strategy for cell microencapsulation, due to the biocompatibility of both polymers and the high mechanical properties attributed by the use of chitosan. The present work focuses on the optimization and characterization of the alginate-chitosan system to achieve long-term cell encapsulation. Microcapsules were prepared from four types of chitosan using one- and two-stage encapsulation procedures. The effect of reaction time and pH on long-term cell viability and mechanical properties of the microcapsules was evaluated. Using the single-stage encapsulation procedure led to increase of at least fourfold in viability compared with the two-stage procedure. Among the four types of chitosan, the use of high molecular weight (MW) chitosan glutamate and low MW chitosan chloride provided high viability levels as well as good mechanical properties, i.e., more than 93% intact capsules. The high viability levels were found to be independent of the reaction conditions when using high MW chitosan. However, when using low MW chitosan, better viability levels (195%) were obtained when using a pH of 6 and a reaction time of 30 min. An alginate-chitosan cell encapsulation system was devised to achieve high cell viability levels as well as to improve mechanical properties, thus holding great potential for future clinical application.     

Effect of long-term water immersion on the fracture toughness of denture base and reline resins

doi: 10.1111/j.1741‐2358.2011.00573.x
Effect of long‐term water immersion on the fracture toughness of denture base and reline resins purpose: This study evaluated the fracture toughness (FT) of one denture base (Lucitone 550 – L) and four hard reline resins [Ufi Gel Hard (UH), Tokuyama Rebase II (TR), New Truliner (NT) and Kooliner (K)], and the effect of long‐term water storage on this property. Materials and methods: Forty specimens (40 × 8 × 4 mm) of each material were made, and FT was assessed after polymerisation (control of reliners), after 48 ± 2 h in water at 37°C (control of denture base resin) and after storage in water at 37°C for 7, 90 or 180 days (all materials). Data (MPa.m^1/2) were analysed by two‐way anova and Games–Howell test (p = 0.05). Results: Resin L exhibited the highest FT mean values. After 180 days of storage, FT mean values of L (3.37), UH (1.53) and K (1.20) were higher than those of the other periods. FT mean values of NT decreased from control (1.63) to 7 days (1.30) and then remained constant. FT mean values of TR (1.13) were similar in all periods of analysis. Conclusion: The denture base resin L showed higher FT mean values than the reline resins. Long‐term water storage increased the FT of L, UH and K, reduced the FT of NT and did not influence the FT of TR.     

Morphogenesis as a macroscopic self-organizing process

We start from reviewing different epistemological constructions used for explaining morphogenesis. Among them, we explore the explanatory power of a law-centered approach which includes top-down causation and the basic concepts of a self-organization theory. Within such a framework, we discuss the morphomechanical models based upon the presumption of feedbacks between mechanical stresses imposed onto a given embryo part from outside and those generated within the latter as a kind of active response. A number of elementary morphogenetic events demonstrating that these feedbacks are directed towards hyper-restoration (restoration with an overshoot) of the initial state of mechanical stresses are described. Moreover, we show that these reactions are bound together into the larger scale feedbacks. That permits to suggest a reconstruction of morphogenetic successions in early Metazoan development concentrated around two main archetypes distinguished by the blastopores geometry. The perspectives of applying the same approach to cell differentiation are outlined. By discussing the problem of positional information we suggest that the developmental pathway of a given embryo part depends upon its preceded deformations and the corresponding mechanical stresses rather than upon its static position at any moment of development.     

Collenchyma: a versatile mechanical tissue with dynamic cell walls

Background

Collenchyma has remained in the shadow of commercially exploited mechanical tissues such as wood and fibres, and therefore has received little attention since it was first described. However, collenchyma is highly dynamic, especially compared with sclerenchyma. It is the main supporting tissue of growing organs with walls thickening during and after elongation. In older organs, collenchyma may become more rigid due to changes in cell wall composition or may undergo sclerification through lignification of newly deposited cell wall material. While much is known about the systematic and organographic distribution of collenchyma, there is rather less information regarding the molecular architecture and properties of its cell walls.

Scope and conclusions

This review summarizes several aspects that have not previously been extensively discussed including the origin of the term ‘collenchyma’ and the history of its typology. As the cell walls of collenchyma largely determine the dynamic characteristics of this tissue, I summarize the current state of knowledge regarding their structure and molecular composition. Unfortunately, to date, detailed studies specifically focusing on collenchyma cell walls have not been undertaken. However, generating a more detailed understanding of the structural and compositional modifications associated with the transition from plastic to elastic collenchyma cell wall properties is likely to provide significant insights into how specific configurations of cell wall polymers result in specific functional properties. This approach, focusing on architecture and functional properties, is likely to provide improved clarity on the controversial definition of collenchyma.     

Viscoelastic properties and nanoscale structures of composite oligopeptide-polysaccharide hydrogels

Biocompatible and biodegradable peptide hydrogels are drawing increasing attention as prospective materials for human soft tissue repair and replacement. To improve the rather unfavorable mechanical properties of our pure peptide hydrogels, in this work we examined the possibility of creating a double hydrogel network. This network was created by means of the coassembly of mutually attractive, but self-repulsive oligopeptides within an already-existing fibrous network formed by the charged, biocompatible polysaccharides chitosan, alginate, and chondroitin. Using dynamic oscillatory rheology experiments, it was found that the coassembly of the peptides within the existing polysaccharide network resulted in a less stiff material as compared to the pure peptide networks (the elastic modulus G' decreased from 90 to 10 kPa). However, these composite oligopeptide-polysaccharide hydrogels were characterized by a greater resistance to deformation (the yield strain γ grew from 4 to 100%). Small-angle neutron scattering (SANS) was used to study the 2D cross-sectional shapes of the fibers, their dimensional characteristics, and the mesh sizes of the fibrous networks. Differences in material structures found with SANS experiments confirmed rheology data, showing that incorporation of the peptides dramatically changed the morphology of the polysaccharide network. The resulting fibers were structurally very similar to those forming the pure peptide networks, but formed less stiff gels because of their markedly greater mesh sizes. Together, these findings suggest an approach for the development of highly deformation-resistant biomaterials.     

Large eddy simulation of mechanical mixing in anaerobic digesters

A comprehensive study of anaerobic digestion requires an advanced turbulence model technique to accurately predict mixing flow patterns because the digestion process that involves mass transfer between anaerobes and their substrates is primarily dependent on detailed information about the fine structure of turbulence in the digesters. This study presents a large eddy simulation (LES) of mechanical agitation of non-Newtonian fluids in anaerobic digesters, in which the sliding mesh method is used to characterize the impeller rotation. The three subgrid scale (SGS) models investigated are: (i) Smagorinsky-Lilly model, (ii) wall-adapting local eddy-viscosity model, and (iii) kinetic energy transport (KET) model. The simulation results show that the three SGS models produce very similar flow fields. A comparison of the simulated and measured axial velocities indicates that the LES profile shapes are in general agreement with the experimental data but they differ markedly in velocity magnitudes. A check of impeller power and flow numbers demonstrates that all the SGS models give excellent predictions, with the KET model performing the best. Moreover, the performance of six Reynolds-averaged Navier-Stokes turbulence models are assessed and compared with the LES results.     

Dietary hardness, loading behavior, and the evolution of skull form in bats

The morphology and biomechanics of the vertebrate skull reflect the physical properties of diet and behaviors used in food acquisition and processing. We use phyllostomid bats, the most diverse mammalian dietary radiation, to investigate if and how changes in dietary hardness and loading behaviors during feeding shaped the evolution of skull morphology and biomechanics. When selective regimes of food hardness are modeled, we found that species consuming harder foods have evolved skull shapes that allow for more efficient bite force production. These species have shorter skulls and a greater reliance on the temporalis muscle, both of which contribute to a higher mechanical advantage at an intermediate gape angle. The evolution of cranial morphology and biomechanics also appears to be related to loading behaviors. Evolutionary changes in skull shape and the relative role of the temporalis and masseter in generating bite force are correlated with changes in the use of torsional and bending loading behaviors. Functional equivalence appears to have evolved independently among three lineages of species that feed on liquids and are not obviously morphologically similar. These trends in cranial morphology and biomechanics provide insights into behavioral and ecological factors shaping the skull of a trophically diverse clade of mammals.