Extended Producer Responsibility in Thailand

Waste electrical and electronic equipment (WEEE) sheds light on the dimmer side of production and consumption patterns in modern societies. The rapid increase in its quantity and complexity contribute to the challenges it poses to solid waste management systems. Several members of the Organisation for Economic Co‐operation and Development (OECD) have relied on the principle of extended producer responsibility (EPR) to tackle the issue, with varying degrees of success. Several non‐OECD countries, including Thailand, are now developing WEEE programs and are looking for lessons from these first movers. This case study aims to provide an understanding both of this context and of the EPR program for WEEE proposed for Thailand. It finds that EPR mechanisms in general, and the proposed buy‐back system financed by product fees in Thailand in particular, have a strong potential to consolidate WEEE collection for the formal recycling sector by offering end users monetary incentives. On the negative side, this is an expensive combination of policy instruments, and the institutional design of the governmental fund is rigid. The policy proposal also contains no mechanism for product redesign—one of the objectives in the national WEEE strategy. This article suggests that the effectiveness of the policy might benefit from more flexibility at the compliance scheme level, in order to lessen the monopoly of the governmental fund, as well as the introduction of differentiated fees to promote environmentally friendly products.     

Patterns of early succession on bare peat in a Swiss mire after a bog burst

Questions: How does plant diversity (species richness, species abundance and rate of change) evolve in early succession on bare peat? Does succession converge towards one equilibrium stage or end up in several stages? Is there a regular pattern in succession velocity? Location: A mire in the calcareous Jura Mountains of northwest Switzerland. Method: Twenty‐one 1‐m² permanent plots on bare peat were used to monitor temporal stages over a 21‐year period (1988 to 2008) in a Swiss mire where a slide occurred in 1987. Species diversity and life forms were analysed based on Shannon's equitability index and cover. We used classification and metric ordination techniques to investigate patterns of successional rates and trends. The high temporal resolution of the survey allowed the pattern of succession velocity to be analysed. Results: Species richness increased continuously over the 21 years of succession. The highest cover throughout the study period was the life form sedge. Time trajectories of the 21 plots revealed three alternative pathways towards intermediate equilibrium stages in the first years, still not converging in the later stages. Changes in succession velocity reached a first maximum about 6 years after the slide had occurred and a second maximum 12 years later.     

Colours of domestication

During the last decade, coat colouration in mammals has been investigated in numerous studies. Most of these studies addressing the genetics of coat colouration were on domesticated animals. In contrast to their wild ancestors, domesticated species are often characterized by a huge allelic variability of coat‐colour‐associated genes. This variability results from artificial selection accepting negative pleiotropic effects linked with certain coat‐colour variants. Recent studies demonstrate that this selection for coat‐colour phenotypes started at the beginning of domestication. Although to date more than 300 genetic loci and more than 150 identified coat‐colour‐associated genes have been discovered, which influence pigmentation in various ways, the genetic pathways influencing coat colouration are still only poorly described. On the one hand, similar coat colourations observed in different species can be the product of a few conserved genes. On the other hand, different genes can be responsible for highly similar coat colourations in different individuals of a species or in different species. Therefore, any phenotypic classification of coat colouration blurs underlying differences in the genetic basis of colour variants. In this review we focus on (i) the underlying causes that have resulted in the observed increase of colour variation in domesticated animals compared to their wild ancestors, and (ii) the current state of knowledge with regard to the molecular mechanisms of colouration, with a special emphasis on when and where the different coat‐colour‐associated genes act.     

Single Nanostructure Electrochemical Devices for Studying Electronic Properties and Structural Changes in Lithiated Si Nanowires

Nanostructured Si is a promising anode material for the next generation of Li‐ion batteries, but few studies have focused on the electrical properties of the Li‐Si alloy phase, which are important for determining power capabilities and ensuring sufficient electrical conduction in the electrode structure. Here, we demonstrate an electrochemical device framework suitable for testing the electrical properties of single Si nanowires (NWs) at different lithiation states and correlating these properties with structural changes via transmission electron microscopy (TEM). We find that single Si NWs usually exhibit Ohmic I–V response in the lithiated state, with conductivities two to three orders of magnitude higher than in the delithiated state. After a number of sequential lithiation/delithiation cycles, the single NWs show similar conductivity after each lithiation step but show large variations in conductivity in the delithiated state. Finally, devices with groups of NWs in physical contact were fabricated, and structural changes in the NWs were observed after lithiation to investigate how the electrical resistance of NW junctions and the NWs themselves affect the lithiation behavior. The results suggest that electrical resistance of NW junctions can limit lithiation. Overall, this study shows the importance of investigating the electronic properties of individual components of a battery electrode (single nanostructures in this case) along with studying the nature of interactions within a collection of these component structures.     

Single Material Solar Cells: the Next Frontier for Organic Photovoltaics?

An overview of various approaches for the realization of single‐material organic solar cells (SMOCs) is presented. Fullerene‐conjugated systems dyads, di‐block copolymers, and self‐organized donor‐acceptor molecules all represent different possible approaches towards SMOCs. Although each of them presents specific advantages and poses specific problems of design and synthesis, these different routes have witnessed significant progress in the past few years and SMOCs with efficiencies in the range of 1.50% have been realized. These performances are already higher than those of bi‐component bulk heterojunction solar cells some ten years ago, demonstrating that SMOCs can represent a credible approach towards efficient and simple organic solar cells. Possible directions for future research are discussed with the aim of stimulating further research on this exciting topic.     

A Durable Alternative for Proton‐Exchange Membranes: Sulfonated Poly(Benzoxazole Thioether Sulfone)s

To develop a durable proton‐exchange membrane (PEM) for fuel‐cell applications, a series of sulfonated poly(benzoxazole thioether sulfone)s ( SPTESBOs) are designed and synthesized, with anticipated good dimensional stability (via acid–base cross linking), improved oxidative stability against free radicals (via incorporation of thioether groups), and enhanced inherent stability (via elimination of unstable end groups) of the backbone. The structures and the degree of sulfonation of the copolymers are characterized using Fourier‐transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy (¹H NMR and ¹⁹F NMR). The electrochemical stabilities of the monomers are examined using cyclic voltammetry in a typical three‐electrode cell configuration. The physicochemical properties of the membranes vital to fuel‐cell performance are also carefully evaluated under conditions relevant to fuel‐cell operation, including chemical and thermal stability, proton conductivity, solubility in different solvents, water uptake, and swelling ratio. The new membranes exhibit low dimensional change at 25°C to 90°C and excellent thermal stability up to 250°C. Upon elimination of unstable end groups, the co‐polymers display enhanced chemical resistance and oxidative stability in Fenton's test. Further, the SPTESBO‐HFB‐60 (HFB‐60=hexafluorobenzene, 60 mol% sulfone) membrane displays comparable fuel‐cell performance to that of an NRE 212 membrane at 80°C under fully humidified condition, suggesting that the new membranes have the potential to be more durable but less expensive for fuel‐cell applications.     

Atomic Layer Deposition of CdS Quantum Dots for Solid‐State Quantum Dot Sensitized Solar Cells

Functioning quantum dot (QD) sensitized solar cells have been fabricated using the vacuum deposition technique atomic layer deposition (ALD). Utilizing the incubation period of CdS growth by ALD on TiO₂, we are able to grow QDs of adjustable size which act as sensitizers for solid‐state QD‐sensitized solar cells (ssQDSSC). The size of QDs, studied with transmission electron microscopy (TEM), varied with the number of ALD cycles from 1‐10 nm. Photovoltaic devices with the QDs were fabricated and characterized using a ssQDSSC device architecture with 2,2',7,7'‐tetrakis‐(N,N‐di‐p methoxyphenylamine) 9,9'‐spirobifluorene (spiro‐OMeTAD) as the solid‐state hole conductor. The ALD approach described here can be applied to fabrication of quantum‐confined structures for a variety of applications, including solar electricity and solar fuels. Because ALD provides the ability to deposit many materials in very high aspect ratio substrates, this work introduces a strategy by which material and optical properties of QD sensitizers may be adjusted not only by the size of the particles but also in the future by the composition.     

Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries

Lithium‐ion batteries (LIBs) have dominated the portable electronics industry and solid‐state electrochemical research and development for the past two decades. In light of possible concerns over the cost and future availability of lithium, sodium‐ion batteries (SIBs) and other new technologies have emerged as candidates for large‐scale stationary energy storage. Research in these technologies has increased dramatically with a focus on the development of new materials for both the positive and negative electrodes that can enhance the cycling stability, rate capability, and energy density. Two‐dimensional (2D) materials are showing promise for many energy‐related applications and particularly for energy storage, because of the efficient ion transport between the layers and the large surface areas available for improved ion adsorption and faster surface redox reactions. Recent research highlights on the use of 2D materials in these future ‘beyond‐lithium‐ion’ battery systems are reviewed, and strategies to address challenges are discussed as well as their prospects.