Stable Li Metal Anode Enabled by Space Confinement and Uniform Curvature through Lithiophilic Nanotube Arrays

The application of lithium (Li) metal anodes in rechargeable batteries is primarily restricted by Li dendrite growth on the metal's surface, which leads to shortened cycle life and safety concerns. Herein, well‐spaced nanotubes with ultrauniform surface curvature are introduced as a Li metal anode structure. The ultrauniform nanotubular surface generates uniform local electric fields that evenly attract Li‐ions to the surface, thereby inducing even current density distribution. Moreover, the well‐defined nanotube spacing offers Li diffusion pathways to the electroactive areas as well as the confined spaces to host deposited Li. These structural attributes create a unique electrodeposition manner; i.e., Li metal homogenously deposits on the nanotubular wall, causing each Li nanotube to grow in circumference without obvious sign of dendritic formation. Thus, the full‐cell battery with the spaced Li nanotubes exhibits a high specific capacity of 132 mA h g^?1 at 1 C and an excellent coulombic efficiency of ≈99.85% over 400 cycles.     

Challenges and Emerging Opportunities in High‐Mobility and Low‐Energy‐Consumption Organic Field‐Effect Transistors

Organic field‐effect transistors (OFETs) are the basic elements of organic circuits towards flexible, printable, and wearable electronics. Low‐energy‐consumption OFETs with high mobility are the prerequisite for practical applications. After 30 years of development, OFETs have progressed rapidly, from field‐effect materials to devices, and from individual device to small‐ and medium‐scale integration. Here, a brief retrospective of OFETs' development over the past decades, and the emerging opportunities and challenges from device physics, multifunctional materials to integrated application are presented.     

Perovskite Solar Cells go Outdoors: Field Testing and Temperature Effects on Energy Yield

Perovskite solar cells (PSC) have shown that under laboratory conditions they can compete with established photovoltaic technologies. However, controlled laboratory measurements usually performed do not fully resemble operational conditions and field testing outdoors, with day‐night cycles, changing irradiance and temperature. In this contribution, the performance of PSCs in the rooftop field test, exposed to real weather conditions is evaluated. The 1 cm² single‐junction devices, with an initial average power conversion efficiency of 18.5% are tracked outdoors in maximum power point over several weeks. In parallel, irradiance and air temperature are recorded, allowing us to correlate outside factors with generated power. To get more insight into outdoor device performance, a comprehensive set of laboratory measurements under different light intensities (10% to 120% of AM1.5) and temperatures is performed. From these results, a low power temperature coefficient of ?0.17% K^?1 is extracted in the temperature range between 25 and 85 °C. By incorporating these temperature‐ and light‐dependent PV parameters into the energy yield model, it is possible to correctly predict the generated energy of the devices, thus validating the energy yield model. In addition, degradation of the tested devices can be tracked precisely from the difference between measured and modelled power.     

油田野外作业工人慢性疾病调查及职业紧张与神经递质的相关性研究

目的:调查油田野外作业工人慢性疾病患病情况,分析职业紧张与神经递质的相关性。方法:通过整群抽样的方式选取油田野外作业工人2000例作为研究对象,采用自制的慢性非传染性疾病调查量表对所有工人的慢性疾病情况予以调查,采用职业紧张量表对所有工人的职业紧张情况予以调查。采用酶联免疫吸附法检测所有工人血清五羟色胺、去甲肾上腺素以及神经肽Y水平,并采用偏相关分析油田野外作业工人职业紧张与神经递质的相关性。结果:2000例油田野外作业工人慢性疾病发病率最高的前三种疾病分别为颈腰部疾病、高血压、高血脂,占比分别为20.60%、15.35%、11.20%。油田野外作业工人中男性职业任务、个体应对资源评分高于女性,而锻炼工人的个体紧张反应评分低于不锻炼工人(P0.05)。油田野外作业工人中饮酒工人神经肽Y水平低于不饮酒工人,锻炼工人的去甲肾上腺素水平高于不锻炼工人(P0.05)。经偏相关分析可得:油田野外作业工人的职业任务评分与五羟色胺、去甲肾上腺素水平呈正相关(P0.05),个体紧张反应评分与神经肽Y水平呈负相关(P0.05)。结论:油田野外作业工人慢性疾病患病情况不容乐观,且其职业紧张与神经递质存在密切相关,在临床工作中可通过改善油田野外作业工人的职业紧张,从而达到改善其神经递质水平的目的。     

Kinetic,isotherm and thermodynamic investigations on adsorption of trace elements and pigments from soybean oil using high voltage electric field-assisted bleaching: A comparative study

In this study, the amounts of trace elements (Fe (II) and Cu (II)) and pigments (chlorophyll and carotenoid) in soybean oil were evaluated under high voltage electric field (HVEF) bleaching method at different voltage (10 and 20 kV), temperature (35–65 °C), time (0−30 min) and clay percentage (0.5–2 %) and then were compared to the industrial bleaching method (IBM). The kinetic data of ions and pigments adsorbed on activated bentonite clay under IBM and HVEF at two voltages of 10 and 20 kV followed the mechanism of the pseudo-first-order model (PFOM). The carotenoid and chlorophyll equilibrium data followed a Freundlich isotherm type model, which demonstrated multilayer adsorption under HVEF. The thermodynamic parameters (ΔG°, ΔH°, and ΔS°) displayed that the adsorption of trace metal ions and pigments on bentonite clay under IBM and HVEF were feasible, endothermic and spontaneous between 35 and 65 °C. The results indicated that the HVEF, especially at higher voltage, has a high remarkable capability to remove metal ions and pigments from soybean oil than the IBM. The highest removal capacity for metal and pigments of soybean oil bleaching were obtained in the order of HVEF-20 kV > HVEF-10 kV > IBM.     

Determination of inflection points of CyberKnife dose profiles within acceptability criteria of deviations in measurements

AimThe aim of this study was to determine the Inflection Points (IPs) of flattening filter free (FFF) CyberKnife dose profiles for cone-based streotactic radiotherapy. In addition, dosimetric field sizes were determined.BackgroundThe increased need for treatment in the early stages of cancer necessitated the treatment of smaller tumors. However, efforts in that direction required the modeling accuracy of the beam. Removal of the flattening filter (FF) from the path of x-ray beam has provided the solution to those efforts, but required a different normalization approach for the beam to ensure the delivery of the dose accurately. As a solution, researchers proposed a normalization factor based on IPs.Materials and methodsMeasurements using microDiamond (PTW 60019), Diode SRS (PTW 60018) and Monte Carlo (MC) calculations of dose profiles were completed at SAD 80 cm and 5 cm depth for 15–60 mm cones. Performance analysis of detectors with respect to MC calculation was carried out. Gamma evaluation method was used to determine achievable acceptability criteria for FFF CyberKnife beams.ResultsAcceptability within (3%–0.5 mm) was found to be anachievable criterion for all dose profile measurements of the cone beams used in this study. To determine the IP, the first and second derivatives of the dose profile were determined via the cubic spline interpolation technique.ConclusionDerivatives of the interpolated profiles showed that locations of IPs and 50% isodose points coincide.     

Provenance selection and site conditions determine growth performance of pedunculate oak

Forests of the future need to cope with adverse climatic conditions, in particular drought, to ensure forest stability and productivity. Given the usually long rotation period of forests, forest managers need to select appropriate, i.e. productive and climate-change resilient tree species and/or provenances, to lower tree-mortality risks and sustain current wood production rates at the end of the 21^st century. A frequent means of assessing which provenances of a given species are adapted to anticipated climate conditions is common garden experiments, where trees from different provenances are planted under similar climate conditions. However, in this context soil conditions also play an important role, since they govern how climate translates into plant-available water and hence plant’s ability to cope with extreme drought events. Here, we examine the effects of soil conditions on pedunculate oak (Quercus robur L.), by studying 10 different Dutch oak provenances that were planted in three provenance trials on different soil types in 1988 in the Netherlands. Using dendroecological methods, we quantified provenance-specific productivity and assessed provenance- and site-specific growth patterns. Our results indicated clear differences in productivity among provenances as well as soil-type specific growth patterns. Consequently, our study highlights the importance of incorporating soil characteristics when evaluating the growth performance of provenances within common garden experiments.     

Environmental DNA analysis shows high potential as a tool for estimating intraspecific genetic diversity in a wild fish population

Environmental DNA (eDNA) analysis has recently been used as a new tool for estimating intraspecific diversity. However, whether known haplotypes contained in a sample can be detected correctly using eDNA‐based methods has been examined only by an aquarium experiment. Here, we tested whether the haplotypes of Ayu fish (Plecoglossus altivelis altivelis) detected in a capture survey could also be detected from an eDNA sample derived from the field that contained various haplotypes with low concentrations and foreign substances. A water sample and Ayu specimens collected from a river on the same day were analysed by eDNA analysis and Sanger sequencing, respectively. The 10 L water sample was divided into 20 filters for each of which 15 PCR replications were performed. After high‐throughput sequencing, denoising was performed using two of the most widely used denoising packages, unoise3 and dada2 . Of the 42 haplotypes obtained from the Sanger sequencing of 96 specimens, 38 (unoise3 ) and 41 (dada2 ) haplotypes were detected by eDNA analysis. When dada2 was used, except for one haplotype, haplotypes owned by at least two specimens were detected from all the filter replications. Accordingly, although it is important to note that eDNA‐based method has some limitations and some risk of false positive and false negative, this study showed that the eDNA analysis for evaluating intraspecific genetic diversity provides comparable results for large‐scale capture‐based conventional methods. Our results suggest that eDNA‐based methods could become a more efficient survey method for investigating intraspecific genetic diversity in the field.