Magnetic-field flux density and spectral characteristics of motor-driven personal appliances

Flux density and spectral measurements were carried out on magnetic fields generated by several types of motor-driven personal appliances used near the body. Among the units tested were several for which the average flux densities, as determined at the surfaces of the appliance, exceeded 0.4 mT. Time-rates-of-change (dB/dt) for several units exceeded 1000 T/s, and several units exhibited high-frequency components in the low-MHz range. Use of such appliances, although normally of short duration, can represent exposure to magnetic fields of relatively high flux density, which may also have high-frequency components. Compared to other household and commercial sources of magnetic fields, those generated by certain motor-driven personal appliances may represent a significant contribution to time-weighted average exposure and may represent an important source of local induced currents in the body. Furthermore, high-frequency transients that represent only a minor contribution to time-weighted average exposure may generate significant instantaneous induced currents. © 1994 Wiley-Liss, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

Determinants of peak muscle power: effects of age and physical conditioning

The relationships between absolute peak muscle power (W _peak), muscle cross sectional area (CSA_tot, i.e. the sum of both thigh and calf CSA) and muscle high energy phosphate concentration (adenosine 5-triphosphate [ATP] and phosphocreatine concentrations [PC]) were studied in 47 subjects classified into five groups: A, 10 sedentary (S) subjects aged 20–35 years; B, 9 S aged 35–50 years; C, 9 S aged more than 50 years; D, 13 children aged 8–13 years; and E, 6 athletes (top level volleyball players) aged 24 (SD 3) years. The W _peak was measured during a maximal vertical high jump off both feet on a force platform. The CSA_tot was measured anthropometrically. The [ATP] and [PC] were determined by ³¹Phosphorus nuclear magnetic resonance spectroscopy. The W _peak decreased with age, was 65% lower in D than in A, and 43% higher in E than in A. The CSA_tot did not vary with age, was 45% smaller in D than in A, and 15% greater in E than in A. The [ATP] and [PC] were essentially the same in all groups. The changes observed in W _peak were only partially accounted for by changes in CSA_tot. Therefore, in addition to the variables investigated, other factors appear to have been involved in the determination of W _peak with increasing age and training. An important role may be played by hormonal, particularly at puberty, and neural factors.     

Engineering organ perfusion protocols: NMR analysis of hepatocyte isolation from perfused rat liver

The development and use of an extracorporeal liver support device depends upon the isolation of a large number of viable, functioning hepatocytes from whole or partial livers. Current practice, however, produces nonoptimal yields, given that a large percentage of hepatocytes initially present are not successfully isolated. The normal hepatocyte isolation protocol consists of sequential perfusion with calcium chelating and collagenase buffers, and then separation of viable hepatocytes from non-viable and nonparenchymal cells, usually on the basis of cell density. In order to improve understanding regarding the metabolic and perfusion state of the liver during this perfusion protocol, ATP, pH, and tissue perfusion were evaluated using nuclear magnetic resonance (NMR). Perfusion with calcium chelating buffer was found to have minimal effect on the metabolic and perfusion parameters, whereas subsequent perfusion with collagenase buffer produced large declines in ATP, pH, and homogeneity of perfusion within 3 min. Perfusion with calcium-chelating buffer alone, or perfusion with calcium chelating buffer followed by a short period of ischemia to mimic the perfusion disruption of collagenase, did not produce the same decline in metabolic parameters. This NMR data suggested that enhancing the early perfusion and penetration of collagenase or prolonging the nontoxic calcium-chelation step may improve the yield and/or functionality of isolated cells. Therefore, several altered perfusion protocols were evaluated in terms of yield of viable parenchymal hepatocytes and hepatocyte albumin production. Although increasing the perfusion flow rate and initial perfusion with inactive (cold) collagenase did not produce significant improvements when compared with the control protocol (control cell yield 226 +/- 42 x 10(6) viable hepatocytes for 10- to 14-week-old female Lewis rat), prolonging and enhancing the calcium-chelating perfusion step or increasing the collagenase concentration did yield a significantly great number of viable parenchymal hepatocytes (393 +/- 44 and 328 +/- 39 x 10(6) viable hepatocytes, respectively) with no change in albumin production per seeded viable cell. (c) 1994 John Wiley & Sons, Inc.     

Quantitative in vivo nuclear magnetic resonance studies of hybridoma metabolism

Carbon-13 nuclear magnetic resonance (NMR) spectroscopy was used to study the metabolism of a murine hybridoma cell line at two feed glutamine concentrations, 4.0 and 1.7 mM. Carbon-13 labeling patterns were used in conjunction with nutrient uptake rates to calculate the metabolic fluxes through the glycolytic pathway, the pentose shunt, the malate shunt, lipid biosynthesis, and the tricarboxylic acid (TCA) cycle. Decreasing the feed glutamine concentration significantly decreased glutamine uptake but had little effect on glucose metabolism. A significant incrase in antibody productivity occurred upon decreasing the feed glutamine level. The increased antibody productivity in concert with decreased glutamine uptake and no apparent change in glucolytic metabolism suggests that antibody production was not energy limited. Metabolic flux calculations indicate that (1) approximately 92% of the glucose consumed proceeds directly through glycolysis with 8% channeled through the pentose shunt; (2) lipid biosynthesis appears to be greater than malate shunt activity; and (3) considerable exchange occurs between TCA cycle intermediates and amino acid metabolic pools, leading to substantial loss of (13)C label from the TCA cycle. These results illustrate that (13)NMR spectroscopy is a powerfulf tool in the calculation of metabolic fluxes, particularly for exchange pathways where no net flux occurs. (c) 1994 John Wiley & Sons, Inc.     

Liquid flow in heterogeneous biofilms

Liquid flow was studied in aerobic biofilms, consisting of microbial cell clusters (discrete aggregates of densely packed cells) and interstitial voids. Fluorescein microinjection was used as a qualitative technique to determine the presence of flow in cell clusters and voids. Flow velocity profiles were determined by tracking fluorescent latex spheres using confocal microscopy. Liquid was flowing through the voids and was stagnant in the cell clusters. Consequently, in voids both diffusion and convection may contribute to mass transfer, whereas in cell clusters diffusion is the dominant factor. The flow velocity in the biofilm depended on the average flow velocity of the bulk liquid. The velocity profiles in biofilms were linear and the velocity was zero at the substratum surface. The velocity gradients within biofilms were 50% of that near walls without biofilm coverage. The influence of the biofilm roughness on the flow velocity profiles was similar to that caused by rigid roughness elements. (c) 1994 John Wiley & Sons, Inc.     

Fertile transgenic barley by particle bombardment of immature embryos

Transgenic, fertile barley (Hordeum vulgare L.) from the Finnish elite cultivar Kymppi was obtained by particle bombardment of immature embryos. Immature embryos were bombarded to the embryonic axis side and grown to plants without selection. Neomycin phosphotransferase II (NPTII) activity was screened in small plantlets. One out of a total of 227 plants expressed the transferred nptII gene. This plant has until now produced 98 fertile spikes (T₀), and four of the 90 T₀ spikes analyzed to date contained the nptII gene. These shoots were further analyzed and they expressed the transferred gene. From green grains, embryos were isolated and grown to plantlets (T₁). The four transgenic shoots of Toivo (the T₀ plant) produced 25 plantlets as T₁ progeny. Altogether fifteen of these T₁ plants carried the transferred nptII gene as detected with the PCR technique, fourteen of which expressed the nptII gene. The integration and inheritance of the transferred nptII gene was confirmed by Southern blot hybridization. Although present as several copies, the transferred gene was inherited as a single Mendelian locus into the T₂ progeny.     

Optimization of transient gene expression in pollen of Norway spruce (Picea abies) by particle acceleration

In order to optimize transient gene expression in Norway spruce pollen after DNA delivery with particle bombardment, effects of different conditions during homhardmenl were analysed using β-glucuroniduse (GUS) driven by the rice Act I promoter and Inciferase (LUS) driven by the tomato !at 52 promoter as reporter genes. Transient gene expression was significantly increased hy using two bombardments. Also the distance from the stopping plate to the sample was critical to gam maximum gene expression. There was no significant difference between gold and tungsten particles, and the number of positively stained pollen increased with increasing DNA concentration, from 5 to 40 pg DNA added in the DNA/tungsten solution The DNA delivery to Norway spruce pollen was most efficient at a chamber pressure above 70 kPa.     

Inactivation of bleomycin by an N-acetyltransferase in the bleomycin-producing strain Streptomyces verticillus

Abstract Bleomycin-producing Streptomyces verticillus ATCC15003 possesses a bleomycin acetyltransferase which inactivates the drug in the presence of acetyl coenzyme A. The site of acylation in enzymically prepared acetylbleomycin A2 was determined by nuclear magnetic resonance analysis; the primary amino group of the β-aminoalanine moiety of bleomycin was acetylated. Acetylbleomycin A2 had no detectable antibacterial activity and did not induce in vitro DNA degradation.     

Direct DNA transfer using electric discharge particle acceleration (ACCELL™ technology)

Direct DNA transfer methods based on particle bombardment have revolutionized plant genetic engineering. Major agronomic crops previously considered recalcitrant to gene transfer have been engineered using variations of this technology. In many cases variety-independent and efficient transformation methods have been developed enabling application of molecular biology techniques to crop improvement. The focus of this article is the development and performance of electric discharge particle bombardment (ACCELL™) technology. Unique advantages of this methodology compared to alternative propulsion technologies are discussed in terms of the range of species and genotypes that have been engineered, and the high transformation frequencies for major agronomic crops that enabled the technology to move from the R&D phase to commercialization. Creation of transgenic soybeans, cotton, and rice will be used as examples to illustrate the development of variety-independent and efficient gene transfer methods for most of the major agronomic crops. To our knowledge, no other gene transfer method based on particle bombardment has resulted in variety-independent and practical generation of large numbers of independently-derived crop plants. ACCELL™ technology is currently being utilized for the routine transfer of valuable genes into elite germplasm of soybean, cotton, bean, rice, corn, peanut and woody species.