Xenopus galectin-VIIa binds N-glycans of members of the cortical granule lectin family (xCGL and xCGL2)

We have identified members of the Xenopus cortical granule lectin (xCGL) family as candidate target glycoproteins of Xenopus galectin-VIIa (xgalectin-VIIa) in Xenopus embryos. In addition to the original xCGL, we also identified a novel member of the xCGL family, xCGL2. Expression of the mRNAs of xCGL and xCGL2, as well as that of xgalectin-VIIa, was observed throughout early embryogenesis. Two and three potential N-glycosylation sites were deduced from the amino acid sequences of xCGL and xCGL2, respectively, and xgalectin-VIIa recognizes N-glycans linked to a common site in xCGL and xCGL2 and also recognizes N-glycans linked to a site specific to xCGL2. However, interaction between xgalectin-Ia and xCGLs was not detectable. We also obtained consistent results on surface plasmon resonance analysis involving xCGLs as ligands and xgalectins as analytes. The Kd value of the interaction between xgalectin-VIIa and xCGLs was calculated to be 35.9 nM. The structures of the N-glycans of xCGLs, which were recognized by xgalectin-VIIa, were analyzed by the two-dimensional sugar map method, and three kinds of N-acetyllactosamine type, biantennary N-glycans were identified as the major neutral N-glycans. The binding specificity of oligosaccharides for xgalectin-VIIa was analyzed by frontal affinity chromatography (FAC). The oligosaccharide specificity pattern of xgalectin-VIIa was similar to that of the human homolog galectin-3, and it was also shown that the N-acetyllactosamine type, biantennary N-glycans exhibit high affinity for xgalectin-VIIa (Kd = 11 microM). These results suggest that xgalectin-VIIa interacts with xCGLs through binding to N-acetyllactosamine type N-glycans and that this interaction might make it possible to organize a lectin network involving members of different lectin families.     

Distribution of AQP2 and AQP3 water channels in human tissue microarrays

SummaryThe objective of this investigation was to use semi-quantitative immunohistochemistry to determine the distribution and expression levels of AQP2 and AQP3 proteins in normal human Tissue MicroArrays. Expression of the vasopressin regulated AQP2 was observed in a limited number of tissues. AQP2 was prominent in the apical and subapical plasma membranes of cortical and medullary renal collecting ducts. Surprisingly, weak AQP2 immunoreactivity was also noted in pancreatic islets, fallopian tubes and peripheral nerves. AQP2 was also localized to selected parts of the central nervous system (ependymal cell layer, subcortical white matter, hippocampus, spinal cord) and selected cells in the gastrointestinal system (antral and oxyntic gastric mucosa, small intestine and colon). These findings corroborate the restricted tissue distribution of AQP2. AQP3 was strongly expressed in many of the human tissues examined particularly in basolateral membranes of the distal nephron (medullary collecting ducts), distal colon, upper airway epithelia, transitional epithelium of the urinary bladder, tracheal, bronchial and nasopharyngeal epithelium, stratified squamous epithelial cells of the esophagus, and anus. AQP3 was moderately expressed in basolateral membranes of prostatic tubuloalveolar epithelium, pancreatic ducts, uterine endometrium, choroid plexus, articular chondrocytes, subchondral osteoblasts and synovium. Low AQP3 levels were also detected in skeletal muscle, cardiac muscle, gastric pits, seminiferous tubules, lymphoid vessels, salivary and endocrine glands, amniotic membranes, placenta and ovary. The abundance of basolateral AQP3 in epithelial tissues and its expression in many non-epithelial cells suggests that this aquaglyceroporin is a major participant in barrier hydration and water and osmolyte homeostasis in the human body.http://www.ncbi.nlm.nih.gov/IEB/Research/Acembly/index.html, NCBI AceView, July 2003     

Systematic comparison of surface coatings for protein microarrays

To process large numbers of samples in parallel is one potential of protein microarrays for research and diagnostics. However, the application of protein arrays is currently hampered by the lack of comprehensive technological knowledge about the suitability of 2-D and 3-D slide surface coatings. We have performed a systematic study to analyze how both surface types perform in combination with different fluorescent dyes to generate significant and reproducible data. In total, we analyzed more than 100 slides containing 1152 spots each. Slides were probed against different monoclonal antibodies (mAbs) and recombinant fusion proteins. We found two surface coatings to be most suitable for protein and antibody (Ab) immobilization. These were further subjected to quantitative analyses by evaluating intraslide and slide-to-slide reproducibilities, and the linear range of target detection. In summary, we demonstrate that only suitable combinations of surface and fluorescent dyes allow the generation of highly reproducible data.     

Microarrays based on affinity-tagged single-chain Fv antibodies: sensitive detection of analyte in complex proteomes

Protein-based microarrays are among the novel class of rapidly emerging proteomic technologies that will allow us to efficiently perform global proteome analysis. However, the process of designing adequate protein microarrays is a major inherent problem. In this study, we have evaluated a protein microarray platform based on nonpurified affinity-tagged single-chain (sc) Fv antibody fragments to generate proof-of-principle and to demonstrate the specificity and sensitivity of the array design. To this end, we used our human recombinant scFv antibody library genetically constructed around one framework, the n-CoDeR library containing 2 x 10(10) clones, as a source for our probes. The probes were immobilized via engineered C-terminal affinity tags, his- or myc-tags, to either Ni(2+)-coated slides or anti-tag antibody coated substrates. The results showed that highly functional microarrays were generated and that nonpurified scFvs readily could be applied as probes. Specific and sensitive microarrays were obtained, providing a limit of detection in the pM to fM range, using fluorescence as the mode of detection. Further, the results showed that spotting the analyte on top of the arrayed probes, instead of incubating the array with large sample volumes (333 pL vs. 40 microL), could reduce the amount of analyte required 4000 times, from 1200 attomole to 300 zeptomole. Finally, we showed that a highly complex proteome, such as human sera containing several thousand different proteins, could be directly fluorescently labeled and successfully analyzed without compromising the specificity and sensitivity of the antibody microarrays. This is a prerequisite for the design of high-density antibody arrays applied in high-throughput proteomics.     

Proteomic analysis of Gal/GalNAc lectin-associated proteins in Entamoeba histolytica

Contact-dependent killing and phagocytosis of target cells by Entamoeba histolytica trophozoites is mediated by the galactose (Gal) and N-acetyl-d-galactosamine (GalNAc)-inhibitable lectin. Previous work has suggested that this lectin functions as part of a signal transduction complex. To identify proteins that might be part of this complex, amebic trophozoites were bound to GalNAc-BSA-labeled magnetic beads and lysed. Bound proteins were eluted from the beads and analyzed by tandem mass spectrometry. Along with the Gal/GalNAc lectin subunits, several cytoskeletal proteins, potential signaling proteins, and a novel transmembrane protein, consistently purified with the GalNAc-BSA beads.     

Ribosome inactivating proteins and apoptosis

Ribosome inactivating proteins (RIPs) are protein toxins that are of plant or microbial origin that inhibit protein synthesis by inactivating ribosomes. Recent studies suggest that RIPs are also capable of inducing cell death by apoptosis. Though many reports are available on cell death induced by RIPs, the mechanism involved is not well studied. Comparison of pathways of apoptosis and cellular events induced by various RIPs suggests a central role played by mitochondria, probably acting as an integrator of cellular stress and cell death. The purpose of this review is to compare the various apoptotic pathways that may be involved and propose a general pathway in RIP-induced cell death.     

Isolation of mannose-binding C-type lectin from Heliothis virescens pupae

A mannose-binding C-type lectin (MBL) was isolated by affinity chromatography from Heliothis virescens immune pupal hemolymph. The immune pupal hemolymph was obtained after bacterial injection of live Enterobacter cloacae bacteria. MBL in mammals acts as an opsonin for phagocytosis and activates the lectin complement pathway of the innate immune response, which leads to killing of gram-negative bacteria and enveloped viruses. The affinity-purified and reduced pupal MBL showed a single band of 36 kDa by SDS-PAGE (12% gel). A dot-immunoblot ELISA (using guinea pig anti-MBL IgG as primary antibody) demonstrated specificity of the antibody for the affinity-purified pupal MBL. The immune pupal hemolymph contained 21 microg of MBL per ml of hemolymph. The amino acid composition of the purified pupal MBL was determined with high amounts of arginine and histidine detected. The presence of MBL in insect pupae has not before been reported and could be important in pupal innate immunity to bacterial infection.     

Volumetric measurements of bacterial cells and extracellular polymeric substance glycoconjugates in biofilms

In this study an enrichment culture developed from activated sludge was used to investigate the architecture of fully hydrated multispecies biofilms. The assessment of biofilm structure and volume was carried out using confocal laser scanning microscopy (CLSM). Bacterial cell distribution was determined with the nucleic acid-specific stain SYTO 60, whereas glycoconjugates of extracellular polymeric substances (EPS) were stained with the Alexa-488-labeled lectin of Aleuria aurantia. Digital image analysis was employed for visualization and quantification of three-dimensional CLSM data sets. The specific volumes of the polymeric and cellular biofilm constituents were quantified. In addition, gravimetric measurements were done to determine dry mass and thickness of the biofilms. The data recorded by the CLSM technique and the gravimetric data were then compared. It was shown that the biofilm thicknesses determined with both methods agree well for slow-growing heterotrophic and chemoautotrophic biofilms. In addition, for slow-growing biofilms, the volumes and masses calculated from CLSM and the biomass calculated from gravimetric measurements were also comparable. For fast-growing heterotrophic biofilms cultivated with high glucose concentrations the data sets fit to a lesser degree, but still showed the same common trend. Compared with traditional gravimetric measurements, CLSM allowed differential recording of multiple biofilm parameters with subsequent three-dimensional visualization and quantification. The quantitative three-dimensional results recorded by CLSM are an important basis for understanding, controlling, exploiting, and modeling of biofilms.     

A new polymeric coating for protein microarrays

Despite the increasing interest in arraying proteins in a high-density format, several technical issues still impede the development of protein microarray technology. One of the major problems is the availability of substrates that are able to bind native proteins with high density. In this study, we investigated the suitability of a novel surface as a support for protein microarrays. A polymeric glass coating is obtained by physical adsorption of a N,N-dimethylacrylamide (DMA), N,N-acryloyloxysuccinimide (NAS), and [3-(methacryloyl-oxy)propyl]trimethoxysilyl (MAPS) copolymer. The coating procedure provides a fast and inexpensive method of producing hydrophilic functional surfaces. The slide performance was investigated in a protein-protein interaction experiment and in the assessment of rheumatoid factor (RF) in human serum samples. The results demonstrate that the ligands immobilized on the polymeric surface maintain an active conformation and are easily accessible, providing a detection limit of 54amol/spot. Moreover, in the RF assay, after hybridization with the sera, the slides have a low background, leading to a detection limit of 900amol/spot.     

Cloning, characterization, and structural analysis of a C-type lectin from Bothrops insularis (BiL) venom

Lectins are carbohydrate-binding molecules that mediate a variety of biological processes. In this work, we identify and characterize a lectin from Bothrops insularis venom, with respect to its biochemical properties and theoretical structure. Initially, from a venom gland cDNA library, we cloned and sequenced a cDNA encoding a protein with high identity to snake venom lectins. A lectin molecule was purified to homogeneity from the venom by affinity column and gel filtration. This protein named BiL displayed hemagglutinating activity that was inhibited by galactose, lactose, and EDTA. Mass spectrometry analysis and sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that BiL is a disulfide-linked dimeric protein consisting of monomers with 16,206 m/z. The amino acid sequence, deduced from its cDNA sequence, was confirmed by Edman sequencing and by peptide mass fingerprint analysis. BiL shows similarity to other C-type lectin family members. Modeling studies provide insights into BiL dimeric structure and its structural determinants for carbohydrate and calcium binding.