Variable effects of air-drying on leaching losses from tree leaf litter

Leaching of soluble substances may be an important first step in leaf litter decomposition in small streams, but recent research has suggested that large leaching losses (up to 30% of initial mass in 48 h) may be an artifact created by using air-dried leaves in decomposition experiments. In laboratory experiments, we compared 3 d leaching losses from freshly fallen and air-dried senescent leaves of 27 tree species from different regions across Canada. Air-dried leaves from all species leached measurable amounts of original mass (3.6–32.8% dry mass), but leaching losses from fresh leaves (0–35%) were detectable in all but two species. Air-drying increased leaching losses in many species, but in others it reduced leaching losses or had no measurable effect. Results for leaves of the same species collected in different regions or in different years were generally similar, but species within the same genus often behaved very differently. Neither moisture content (fresh or air-dried), leaf thickness, nor cuticle thickness proved of any value as predictors of leaching losses or the effect of air-drying. The propensity of autumn-fallen leaves to leach, whether fresh or air-dried, appears to be a property of the individual tree species.     

Demography,genealogy and genetics. The reproductive process in the populations of two French Mountain Valleys from the seventeenth to the twentieth century

An exhaustive analysis of registers of births, deaths, and marriages is used to reconstitute genealogies, both ascending and descending, for all individuals who lived in two mountain valleys: the Valserine valley (in the French Jura), which is studied from the end of the seventeenth century to the present, and the Vallouise valley (in the French Alps) studied from the seventeenth to the nieteenth centuries. This genealogical approach makes it possible to trace the reproductive process in the populations whose members lived in the valley for several generations. The Vallouise valley forms an important demographic isolate; nearly 98 per cent of those born between 1820 and 1849 were descendants of ancestors who had lived in the valley two centuries earlier. By contrast, there has been continuous immigration into the Valserine valley, which has resulted in a constant renewal of the gene pool. Only 18 per cent of the gene pool of individuals living in this valley two centuries later was contributed by those who lived in the valley and who were born before 1750.     

Modeling of nitrogen transformations and translocations

Different submodels within complex model packages on N regimes-for plant N-uptake, net N-mineralization, nitrate leaching and microbial N immobilization-are critically reviewed mainly with regard to their prediction ability on the basis of three comparative papers. Only for some of the processes adequate statistical evaluation of the models was possible. Compared to the other statistically evaluable process, nitrate leaching, modeling of plant N-uptake yields the better results. Most models for mineralization use arbitrary approaches rather than empirical ones. Although only approximate estimates of N mineralisation were at hand, the models generally behave expectedly poor. Only one model-DAISY-out of 16 involved in the comparison uses an explicit microbial biomass sub-model including microbial growth, decline and maintenance terms. So DAISY is the only model coupling C and N cycles. But what is true for an individual model describing the C and N transformation of a lab incubation experiment seems to be valid for most of the complex simulation work on the C and N regimes: this model was said to be overparameterized with respect to the available data.     

Engineering challenges in high density cell culture systems

High density cell culture systems offer the advantage of production of bio-pharmaceuticals in compact bioreactors with high volumetric production rates; however, these systems are difficult to design and operate. First of all, the cells have to be retained in the bioreactor by physical means during perfusion. The design of the cell retention is the key to performance of high density cell culture systems. Oxygenation and media design are also important for maximizing the cell number. In high density perfusion reactors, variable cell density, and hence the metabolic demand, require constant adjustment of perfusion rates. The use of cell specific perfusion rate (CSPR) control provides a constant environment to the cells resulting in consistent production. On-line measurement of cell density and metabolic activities can be used for the estimation of cell densities and the control of CSPR. Issues related to mass transfer and mixing become more important at high cell densities. Due to the difference in mass transfer coefficients for oxygen and CO₂, a significant accumulation of dissolved CO₂ is experienced with silicone tubing aeration. Also, mixing is observed to decrease at high densities. Base addition, if not properly done, could result in localized cell lysis and poor culture performance. Non-uniform mixing in reactors promotes the heterogeneity of the culture. Cell aggregation results in segregation of the cells within different mixing zones. This paper discusses these issues and makes recommendations for further development of high density cell culture bioreactors.     

Mercury translocation in and evaporation from soil. I. soil lysimeter experiments with 203Hg‐radiolabeled compounds

Due to a considerable increase of anthropogenic mercury emissions, the mercury load of many soils has risen significantly, for instance in northern Europe. Understanding the fate of mercury in soils is a prerequisite for assessing the effects of ecotoxicological concern. This paper presents a method for obtaining qualitative and quantitative information about mercury translocation in and evaporation from soil. Soil lysimeters were treated with ²⁰³Hg‐labeled HgCl₂ and CH₃HgCl and irrigated with artificial rain. It was demonstrated that the leaching of Hg can be detected by measuring the relative y‐activity throughout the soil profile by means of Na(TI)I detectors. Furthermore, the set‐up was designed to allow detection of Hg volatilization from soil by using traps of iodized charcoal, followed by a potassium peroxodisulfate solution and measuring the γ‐activity. The amount of radioactive Hg in soil leachate was measured by a Na(Tl)I well‐type detector after upconcentration. The determination of monomethyl ²⁰³Hg was been performed by extraction procedures that isolate the methyl mercury compounds. The amount of ²⁰³Hg retained in the soil profile and the real depth of leaching were determined by stratifying the soil profile at the end of the experiment and measuring the y‐activity. With control of all pathways of Hg, the experimental design allows performance of a mass balance analysis.     

The influence of pH and chloride on the retention of cadmium,lead, mercury,and zinc by soils

The extent of contamination of soils by toxic heavy metals not only depends on the rate of loading of the metal but also on the nature of the adsorbing surfaces, the degree of alkalinity or acidity of the soil and the presence of aqueous complexant ligands. This work reports on the role of pH on the retention of Cd, Hg, Pb and Zn by two soils and on the influence of the chloride, Cl‐, ion on the chemical speciation and retention of the four metals. Batch adsorption experiments were conducted from pH 3 to 7 in the presence of either 0.1 M LiCl or LiClO₄. The results of the study showed that high concentrations of Cl^‐ ions can greatly decrease the retention of Hg and have an increasingly lesser effect on Cd, Pb and Zn retention. The effect of the Cl^‐ons was directly related to the metal‐Cl formation constants. The results of computer modeling of Cd and Hg retention by goethite and humic acid fractions indicated the relative importance of aqueous vs. surface complexation on metal retention. For organic surfaces, which do not form ternary surface complexes, the presence of aqueous complexant ligands should always decrease the adsorption of the metal. For mineral surfaces, which do form ternary surface complexes, there may be increased or decreased metal retention depending on the formation constant of the aqueous metal‐ligand species, the intrinsic complexation constants for the various binary and ternary complexes of the metal and the concentration of the complexant ligand. Thus for Hg, which forms very strong aqueous species with Cl^‐ ions, reduced adsorption on goethite was predicted in the presence of 0.1 M LiCl, while enhanced adsorption was predicted for Cd and Pb. The results suggest caution in the disposal of Cl‐containing wastes onto metal‐contaminated soils. The deleterious effects of Cl^‐ ion addition would be greatest for soils with relatively high organic matter contents and low contents of hydrous ferric oxides.     

Factors affecting gene delivery by particle bombardment ofDendrobium orchids

Summary Five parameters were examined for their effect on transformation ofDendrobium tissues by microprojectile bombardment. The superpromoter in pBI426 produced at least 1.5 times as many transient transformants as the single cauliflower mosaic virus 35S promoter in pBI121 (37 to 69% vs. 0 to 44%) with dark and frequent GUS (β-glucuronidase) staining. Tissue, genotype, and type of microparticle significantly affected transient GUS activity. Higher expression was seen in protocormlike bodies and in hybrid UH44 compared to etiolated shoots and protocorms and to hybrids M61 and K1329-39. Microparticles of 1.6-μm Bio-Rad gold were more effective than 1.0-μm ASI gold. Transient GUS activity did not differ among protocormlike bodies bombarded using helium propellant pressures of 650, 900, or 1100 psi. Transgenic plants were recovered fromDendrobium UH800 protocormlike bodies bombarded with pBI426-coated, 1.1-μm tungsten particles using an early-model gunpowder-driven apparatus with an estimated stable transformation rate of 11.7%. One transgenic plant ofDendrobium UH44 was recovered from etiolated shoot explants bombarded with pBI121-coated, 1.1-μm tungsten particles using the Dupont PDS-1000 with a stable transformation rate of 0.17%. Positive selection results showed 100 to 200 mg·liter⁻¹ kanamycin to be appropriate for regeneration of transgenic plants from protocormlike bodies, protocorms, and etiolated shoot explants over a 3- to 9.5-mo. period.