Development of a bionanotechnological phosphate removal system with thermostable ferritin

Phosphate removal to ecologically desired levels of <0.01 mg/L is currently dependent on large overdosing of metal salts and production of large amounts of chemical sludge. The present study focuses on the development and performance of a new bionanotechnological phosphate removal system, based on sorption of oxoanions by nanoscale ferric iron particles stabilized within thermostable ferritin from the hyperthermophilic archaeon Pyrococcus furiosus (PfFrt). Laboratory studies show that this thermostable protein nanocage has fast kinetics for phosphate uptake at very low concentrations by catalytic oxidation of iron. In this study we demonstrate essentially complete phosphate removal with a capacity of approximately 11 mg/g PfFrt. Ferritin can easily be immobilized and is amenable to fast and efficient regeneration, making recovery of phosphate possible. The phosphate removal process with PfFrt is, due to its high affinity, able to reach ecologically desired phosphate levels and in addition it is cost competitive with existing techniques. Biotechnol. Bioeng. 2010;105: 918–923. © 2009 Wiley Periodicals, Inc.     

Newly synthesized peptide,Ara-27, exhibits significant improvement in cell-penetrating ability compared to conventional peptides

Cell-penetrating peptides (CPPs) are short amino acid sequences known to act as a vehicle for enhancing the intracellular translocating efficiency of extracellular molecules. Although many groups have attempted to develop peptides with high cell-penetrating efficiencies, very few have demonstrated efficient cellular uptake of CPPs at low concentrations. Here, we describe a newly synthesized peptide derived from Arabidopsis, Ara-27, which exhibits significant improvement in cell-penetrating efficiency compared to existing CPPs. The cell-penetrating efficiency of Ara-27 was compared with the commonly used Tat-protein transduction domain (Tat-PTD) and membrane translocating sequence (MTS) in human dermal fibroblast (HDF) and human dental pulp stem cells (hDPSC). Cell-penetrating efficiency of fluorescein isothiocyanate (FITC)-labeled CPPs were assessed by flow cytometry and visualized by confocal microscopy. Flow cytometric analysis revealed >99% cell-penetrating efficiency for 2 μM Ara-27 in both HDF and hDPSC. In contrast, 2 μM Tat-PTD and MTS showed <10% cell-penetrating efficiency in both cells. In support, relative fluorescence intensities of FITC-labeled Ara-27 were around 8 to 22 times higher than those of Tat-PTD and MTS in both cells. Confocal analysis revealed internalization of 0.2 and 2 μM Ara-27 in both human cells, which was not observed for Tat-PTD and MTS at either concentration. In conclusion, this study describes a novel CPP, Ara-27, which exhibit significant improvement in intracellular uptake compared to conventional CPPs, without affecting cell viability. Thus, development of Ara-27 based peptides may lead to improved delivery of functional cargo such as small molecules, siRNA, and drugs for in vivo studies.     

Particle size influences fibronectin internalization and degradation by fibroblasts

The application of nanotechnology for drug targeting underlines the importance of controlling the kinetics and cellular sites of delivery for optimal therapeutic outcomes. Here we examined the effect of particle size on internalization and degradation of surface-bound fibronectin by fibroblasts using polystyrene nanoparticles (NPs; 51 nm) and microparticles (MPs; 1 μm). Fibronectin was strongly bound by NPs and MPs as assessed by immuno-dot blot analysis (5.1 ±0.4×10^{– 5} pg fibronectin per μm² of NP surface; 4.2±±0.3×10^–5 pg fibronectin per μm² of MP surface; p>0.2). We estimated that ~193 fibronectin molecules bound to a MP compared with 0.6 fibronectin molecules per NP, indicating that ~40% of nanoparticles were not bound by fibronectin. One hour after incubation, fibronectin-coated NPs and MPs were rapidly internalized by Rat-2 fibroblasts. MPs and NPs were engulfed partly by receptor-mediated endocytosis as indicated by decreased uptake when incubated at 4 °C, or by depletion of ATP with sodium azide. Pulse-chase experiments showed minimal exocytosis of NPs and MPs. Internalization of NPs and MPs was inhibited by jasplakinolide, whereas internalization of MPs but not NPs was inhibited by latrunculin B and by integrin-blocking antibodies. Extraction of plasma membrane cholesterol with methyl β-cyclodextrin inhibited internalization of fibronectin-coated NPs but not MPs. Biotinylated fibronectin internalized by cells was extensively degraded on MPs but not NPs. Particle size affects actin and clathrin-dependent internalization mechanisms leading to fibronectin degradation on MPs but not NPs. Thus either prolonged, controlled release or an immediate delivery of drugs can be achieved by adjusting the particle size along with matrix proteins such as FN.     

Effect of gemini surfactant (16-6-16) on the synthesis of silver nanoparticles: A facile approach for antibacterial application

In this report, we describe the effect of Gemini surfactants1, 6-Bis (N, N-hexadecyldimethylammonium) adipate (16-6-16) on synthesis, stability and antibacterial activity of silver nanoparticles (AgNPs). The stabilizing effect of Gemini surfactant and aggregation behavior of AgNPs was evaluated by plasmonic property and morphology of the AgNPs were characterized by UV–vis spectroscopy, Dynamic Light Scattering (DLS), X-ray diffraction (XRD), High resolution transmission electron microscopy (HRTEM) and Energy dispersive X-ray analysis (EDX) techniques. Interestingly, the formation of quite mono-dispersed spherical particles was found. Apart from the stabilizing role, the Gemini surfactant has promoted the agglomeration of individual AgNPs in small assemblies whose Plasmon band features differed from those of the individual nanoparticles. The antibacterial activity of the synthesized AgNPs on Gram-negative and Gram-positive bacterium viz., E. coli and S. aureus was carried out by plate count, growth kinetics and cell viability assay. Furthermore, the mechanism of antibacterial activity of AgNPs was tested by Zeta potential and DLS analysis, to conclude that surface charge of AgNPs disrupts the cells causing cell death.     

Droplet aerodynamics,cellular uptake,and efficacy of a nebulizable corticosteroid nanosuspension are superior to a micronized dosage form

Inhaled corticosteroids are considered to be an effective prophylactic against the morbid symptoms of several lung diseases, but scope remains for improvement in drug delivery technology to benefit bioavailability and treatment compliance. To ascertain whether dosage form might influence bioavailability, the emission characteristics and efficacy of a nanoparticulate budesonide formulation (Nanagel®) were compared with those of a proprietary micronized suspension (Pulmicort®) when delivered as a nebulized aerosol to human airway epithelial cells in a culture model. Having the visual appearance of a clear solution, Nanagel® was delivered by both jet and vibrating mesh nebulizers as an increased fine particle fraction and with a smaller mass median aerodynamic diameter (MMAD) compared to the micronized suspension. Quantitative high performance liquid chromatography (HPLC) analysis of cultured epithelia one hour after treatment with Nanagel® revealed a significantly greater cellular accumulation of budesonide when compared with Pulmicort® for an equivalent dose, a differential which persisted 24 and 48 h later. A quantitative in vitro assay measuring the activity of enzymes involved in superoxide production revealed that stressed HaCaT cells (a long‐lived, spontaneously immortalized human keratinocyte line) treated with Nanagel® continued to show significantly greater attenuation of inflammatory response compared with Pulmicort®‐treated cells 24 h after the application of an equivalent budesonide dose. The present in vitro findings suggest that formulation of inhalable drugs such as budesonide as aerosolized nanoparticulate, rather than microparticulate, suspensions can enhance bioavailability with concomitant improvements in efficacy. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Prediction of chlortetracycline adsorption on the Fe3O4 nanoparticle using molecular dynamics simulation

Abstract

Molecular dynamics (MD) simulation was applied to investigate the adsorption mechanism of chlortetracycline (CTC) antibiotic molecule as the aqueous pollutant on the Fe₃O₄ nanoparticle (NP). Two different NP sizes with a diameter of about 1.4?nm and 3.5?nm were selected. Initially, the stability of both NPs in water was investigated by calculating radial distribution function curves of NP atoms. Simulation results confirmed the stable crystallographic structures of both NPs. However, small NP induce greater structural stabilization. Then, CTC molecules were adsorbed on NPs surface in various pollutant concentrations. Electrostatic and hydrogen bond were the major types of interactions between CTC molecules and the adsorbent surface. CTC molecules formed a complex with NP surface from their amine side chains; while they were parallel to each other in their aromatic rings and π-π bond between two CTC molecules was formed. Diffusion rate of CTC molecules could predict the adsorption mechanism. At lower concentration of CTC, CTC molecules tend to adsorb on the NP surface. At these concentrations, the diffusion rate of CTC was high. By increasing the CTC concentration, the pollutant agglomeration was enhanced which decreased the diffusion rate. At this time, the surface of NP was saturated. In addition, the results of isotherm curves showed that CTC adsorption on small NPs could be defined with both Langmuir and Freundlich isotherm models, while Freundlich isotherm model was more appropriate for larger NPs. In conclusion, observations confirmed that MD simulation could successfully predict the behavior of CTC adsorption on the Fe₃O₄ NP surface.

Communicated by Ramaswamy H. Sarma     

Probing the conformational changes and peroxidase-like activity of cytochrome c upon interaction with iron nanoparticles

Herein, the interaction of iron nanoparticle (Fe-NP) with cytochrome c (Cyt c) was investigated, and a range of techniques such as dynamic light scattering (DLS), zeta potential measurements, static and synchronous fluorescence spectroscopy, near and far circular dichroism (CD) spectroscopy, and ultraviolet–visible (UV–vis) spectroscopy were used to analyze the interaction between Cyt c and Fe-NP. DLS and zeta potential measurements showed that the values of hydrodynamic radius and charge distribution of Fe-NP are 83.95 ± 3.7 nm and 4.5 ± .8 mV, respectively. The fluorescence spectroscopy results demonstrated that the binding of Fe-NP with Cyt c is mediated by hydrogen bonds and van der Waals interactions. Also Fe-NP induced conformational changes in Cyt c and reduced the melting temperature value of Cyt c from 79.18 to 71.33°C. CD experiments of interaction between Fe-NP and Cyt c revealed that the secondary structure of Cyt c with the dominant α-helix structures remained unchanged whereas the tertiary structure and heme position of Cyt c are subjected to remarkable changes. Absorption spectroscopy at 695 nm revealed that Fe-NP considerably disrupt the Fe…S(Met80) bond. In addition, the UV–vis experiment showed the peroxidase-like activity of Cyt c upon interaction with Fe-NP. Hence, the data indicate the Fe-NP results in unfolding of Cyt c and subsequent peroxidase-like activity of denatured species. It was concluded that a comprehensive study of the interaction of Fe-NP with biological system is a crucial step for their potential application as intracellular delivery carriers and medicinal agents.     

High‐efficiency affinity precipitation of multiple industrial mAbs and Fc‐fusion proteins from cell culture harvests using Z‐ELP‐E2 nanocages

Affinity precipitation using Z‐elastin‐like polypeptide‐functionalized E2 protein nanocages has been shown to be a promising alternative to Protein A chromatography for monoclonal antibody (mAb) purification. We have previously described a high‐yielding, affinity precipitation process capable of rapidly capturing mAbs from cell culture through spontaneous, multivalent crosslinking into large aggregates. To challenge the capabilities of this technology, nanocage affinity precipitation was investigated using four industrial mAbs (mAbs A–D) and one Fc fusion protein (Fc A) with diverse molecular properties. A molar binding ratio of 3:1 Z:mAb was sufficient to precipitate >95% mAb in solution for all molecules evaluated at ambient temperature without added salt. The effect of solution pH on aggregation kinetics was studied using a simplified two‐step model to investigate the protein interactions that occur during mAb–nanocage crosslinking and to determine the optimal solution pH for precipitation. After centrifugation, the pelleted mAb–nanocage complex remained insoluble and was capable of being washed at pH ≥ 5 and eluted with at pH < 4 with >90% mAb recovery for all molecules. The four mAbs and one Fc fusion were purified from cell culture using optimal process conditions, and >94% yield and >97% monomer content were obtained. mAb A–D purification resulted in a 99.9% reduction in host cell protein and >99.99% reduction in DNA from the cell culture fluids. Nanocage affinity precipitation was equivalent to or exceeded expected Protein A chromatography performance. This study highlights the benefits of nanoparticle crosslinking for enhanced affinity capture and presents a robust platform that can be applied to any target mAb or Fc‐containing proteins with minimal optimization of process parameters.