引进马铃薯种质资源抗旱性评价

马铃薯属于干旱敏感型作物,当前生产上的马铃薯品种多数不耐旱,中国马铃薯抗旱育种进程又受到遗传背景狭窄的制约。引进外来种质资源,拓宽我国马铃薯遗传背景,加快选育抗旱品种是马铃薯应对干旱的关键策略。2016年和2017年,在常规滴灌和雨养条件下,利用增广设计方法,以生产上常用的5个马铃薯品种为对照,对来自国际马铃薯中心的315份高代品系和中国已有的3个品种进行抗旱性评价。通过AMMI模型和GGE模型分析基因型、环境及二者互作对产量的影响,并结合抗旱指数筛选抗旱性稳定且产量高的材料。从整体上看,在雨养条件下,两年马铃薯平均产量差异较小,但是变异系数较大,常规滴灌条件下正好相反。马铃薯产量受基因型、环境及其交互作用的显著影响,其变异平方和分别占总处理平方和的43.39%、39.36%和17.26%;C93和YS902两年的抗旱指数均高于对照品种,稳产性好,C48虽然抗旱指数相对较低,但是高产和稳产性高于所有材料。筛选出来的材料不仅可以作为抗旱育种亲本,还可以通过进一步研究其抗旱机制,为抗旱育种提供理论支持。     

Effect of acyl donor chain length and sugar/acyl donor molar ratio on enzymatic synthesis of fatty acid fructose esters

Lipase-catalyzed synthesis of fatty acid sugar esters through direct esterification was performed in 2-methyl 2-butanol as solvent. Fructose and saturated fatty acids were used as substrates and the reaction was catalyzed by immobilized Candida antarctica lipase. The effect of the initial fructose/acyl donor molar ratio and the carbon-chain length of the acyl donor as well as their reciprocal interactions on the reaction performance were investigated. For this purpose, an experimental design taking into account variations of the molar ratio (from 1:1 to 1:5) and the carbon-chain length of the fatty acid (from C8 to C18) was employed. Statistical analysis of the data indicated that the two factors as well as their interactions had significant effects on the sugar esters synthesis. The obtained results showed that whatever the molar ratio used, the highest concentration (73 g l⁻¹), fructose and fatty acid conversion yields (100% and 80%, respectively) and initial reaction rate (40 g l⁻¹ h⁻¹) were reached when using the C18 fatty acid as acyl donor. Low molar ratios gave the best fatty acid conversion yields and initial reaction rates, whereas the best total sugar ester concentrations and fructose conversion yields were obtained for high molar ratios.     

Boosting protein stability with the computational design of β‐sheet surfaces

β‐sheets often have one face packed against the core of the protein and the other facing solvent. Mutational studies have indicated that the solvent‐facing residues can contribute significantly to protein stability, and that the preferred amino acid at each sequence position is dependent on the precise structure of the protein backbone and the identity of the neighboring amino acids. This suggests that the most advantageous methods for designing β‐sheet surfaces will be approaches that take into account the multiple energetic factors at play including side chain rotamer preferences, van der Waals forces, electrostatics, and desolvation effects. Here, we show that the protein design software Rosetta, which models these energetic factors, can be used to dramatically increase protein stability by optimizing interactions on the surfaces of small β‐sheet proteins. Two design variants of the β‐sandwich protein from tenascin were made with 7 and 14 mutations respectively on its β‐sheet surfaces. These changes raised the thermal midpoint for unfolding from 45°C to 64°C and 74°C. Additionally, we tested an empirical approach based on increasing the number of potential salt bridges on the surfaces of the β‐sheets. This was not a robust strategy for increasing stability, as three of the four variants tested were unfolded.     

The Alacoil: A very tight,antiparallel coiled-coil of helices

The Alacoil is an antiparallel (rather than the usual parallel) coiled-coil of α-helices with Ala or another small residue in every seventh position, allowing a very close spacing of the helices (7.5–8.5 Å between local helix axes), often over four or five helical turns. It occurs in two distinct types that differ by which position of the heptad repeat is occupied by Ala and by whether the closest points on the backbone of the two helices are aligned or are offset by half a turn. The aligned, or ROP, type has Ala in position “d” of the heptad repeat, which occupies the “tip-to-tip” side of the helix contact where the Cα–Cβ bonds point toward each other. The more common offset, or ferritin, type of Alacoil has Ala in position “a” of the heptad repeat (where the Cα-Cβ bonds lie back-to-back, on the “knuckle-touch” side of the helix contact), and the backbones of the two helices are offset vertically by half a turn. In both forms, successive layers of contact have the Ala first on one and then on the other helix. The Alacoil structure has much in common with the coiled-coils of fibrous proteins or leucine zippers: both are α-helical coiled-coils, with a critical amino acid repeated every seven residues (the Leu or the Ala) and a secondary contact position in between. However, Leu zippers are between aligned, parallel helices (often identical, in dimers), whereas Alacoils are between antiparallel helices, usually offset, and much closer together. The Alacoil, then, could be considered as an “Ala anti-zipper.” Leu zippers have a classic “knobs-into-holes” packing of the Leu side chain into a diamond of four residues on the opposite helix; for Alacoils, the helices are so close together that the Ala methyl group must choose one side of the diamond and pack inside a triangle of residues on the other helix. We have used the ferritin-type Alacoil as the basis for the de novo design of a 66-residue, coiled helix hairpin called “Alacoilin.” Its sequence is: cmSP DQWDKE A AQYDAHA QE FEKKS HRNng TPEA DQYRHM A SQY QAMA QK LKAIA NQLKK Gseter (with “a” heptad positions underlined and nonhelical parts in lowercase), which we will produce and test for both stability and uniqueness of structure.     

The design of single-stranded nucleic acid knots

A general strategy is described for the synthesis of single-stranded nucleic acid knots. Control of nucleic acid sequence is used to direct the formation of secondary structures that produce the target topology. The key feature of the strategy is the equation of a half-turn of double helical DNA or RNA with a node in a knot. By forming nodes from complementary DNA sequences, it appears possible to direct the assembly of any simple knot. Stabilization of individual nodes may be achieved by constructing them from long regions containing both B-DNA and Z-DNA. Control over the braiding of DNA that acts as a link between node-forming domains can be realized by condensing the nodes into well-defined DNA structures, such as extended domains of linear duplex, branched junctions, antijunctions or mesojunctions. Further topological control may be derived from the pairing of linker regions to complementary single-stranded molecules, thereby preventing them from braiding in an undesirable fashion.     

Application of empirical design methodologies to the study of the influence of reaction conditions and N-alpha-protecting group structure on the enzymatic X-Phe-Leu-NH(2) dipeptide synthesis in buffer/dimethylformamide solvents systems

The influence of five different N-terminal protecting groups (For, Ac, Boc, Z, and Fmoc) and reaction conditions (temperature and dimethylformamide content) on the alpha-chymotrypsin-catalyzed synthesis of the dipeptide derivative X-Phe-Leu-NH(2) was studied. Groups such as For, Ac, Boc, and Z always rendered good peptide yields (82% to 85%) at low reaction temperatures and DMF concentrations, which depended on the N-alpha protection choice. Boc and Z were the most reactive N-alpha groups and, in addition, the most suitable for peptide synthesis. On the other hand, the use of empirical design methodologies allowed, with minimal experimentation and by multiple regression, to deduce an equation, which correlates the logarithm of the first order kinetic constant (log k') with reaction temperature, DMF concentration, and hydrophobicity (log P values) of the different protecting groups. The predictive value of the equation was tested by comparing the performance of another protective group, such as Aloc, with the performance predicted by said equation. Experimental and calculated k' values were found to be in good agreement.     

Improving coiled-coil stability by optimizing ionic interactions

Alpha-helical coiled coils are a common protein oligomerization motif stabilized mainly by hydrophobic interactions occurring along the coiled-coil interface. We have recently designed and solved the structure of a two-heptad repeat coiled-coil peptide that is stabilized further by a complex network of inter- and intrahelical salt-bridges in addition to the hydrophobic interactions. Here, we extend and improve the de novo design of this two heptad-repeat peptide by four newly designed peptides characterized by different types of ionic interactions. The contribution of these different types of ionic interactions to coiled-coil stability are analyzed by CD spectroscopy and analytical ultracentrifugation. We show that all peptides are highly alpha-helical and two of them are 100% dimeric under physiological conditions. Furthermore, we have solved the X-ray structure of the most stable of these peptides and the rational design principles are verified by comparing this structure to the structure of the parent peptide. We show that by combining the most favorable inter- and intrahelical salt-bridge arrangements it is possible to design coiled-coil oligomerization domains with improved stability properties.     

符号检验法及其在动物生态学研究中的应用

符号检验法是非参数统计法的一种重要方法,在动物生态学的实验数据统计分析领域有一定的实用价值,本文简要介绍这一方法的使用。