Design,Synthesis and Molecular Docking Studies of Some Tetrahydropyrimidine Derivatives as Possible Fascin Inhibitors

Eight derivatives of tetrahydropyrimidine scaffold were designed and prepared as hybrid compounds possessing the structural features of both monastrol as an anticancer drug and nifedipine as a fascin blocking agent. All of the compounds were evaluated for their cytotoxic potency and the ability to inhibit 4T1 breast cancer cells migration. Then, they were investigated in silico for their ability to inhibit the fascin protein using molecular docking simulation. The most potent compound was 4d and the weakest one was 4a according to the in vitro cytotoxicity assay. The corresponding IC₅₀ values were 193.70 and 248.75 μm , respectively. The least cytotoxic compound ( 4a ) was one of the strongest ones in binding to the fascin binding site according to the molecular docking results. 4a and 4e inhibited the 4T1 cells migration better than other compounds. They were more potent than nifedipine in inhibiting the migration process. In silico studies proved 4h to be the most potent fascin inhibitor in terms of ΔG_bind although it was not inhibiting migration. The controversy between the in vitro and in silico results may cancel the theory of the involvement of the fascin inhibition in the migration inhibition. However, the considerable antimigratory effects of some of the synthesized compounds encourage performing further in vivo experiments to introduce novel tumor metastasis inhibitors.     

Rational Design of Novel Phosphoinositide 3‐Kinase Gamma (PI3Kγ) Selective Inhibitors: A Computational Investigation Integrating 3D‐QSAR,Molecular Docking and Molecular Dynamics Simulation

Phosphoinositide 3‐kinase gamma (PI3Kγ) draws an increasing attention due to its link with deadly cancer, chronic inflammation and allergy. But the development of PI3Kγ selective inhibitors is still a challenging endeavor because of the high sequence homology with the other PI3K isoforms. In order to acquire valuable information about the interaction mechanism between potent inhibitors and PI3Kγ, a series of PI3Kγ isoform‐selective inhibitors were analyzed by a systematic computational method, combining 3D‐QSAR, molecular docking, molecular dynamic (MD) simulations, free energy calculations and decomposition. The general structure–activity relationships were revealed and some key residues relating to selectivity and high activity were highlighted. It provides precious guidance for rational virtual screening, modification and design of selective PI3Kγ inhibitors. Finally, ten novel inhibitors were optimized and P10 showed satisfactory predicted bioactivity, demonstrating the feasibility to develop potent PI3Kγ inhibitors through this computational modeling and optimization.     

Synthesis and Antitumor Evaluation in Vitro of NO‐Donating Ursolic Acid‐Benzylidene Derivatives

Antitumor activity of triterpenoid and its derivatives has attracted great attention recently. Our previous efforts led to the discovery of a series of NO‐donor betulin derivatives with potent antitumor activity. Herein, we prepared eight compounds derived from ursolic acid (UA). All the compounds were evaluated for their in vitro cytotoxicity against four human cancer cell lines (HepG‐2, MCF‐7, HT‐29 and A549). Among the compounds tested, compound 4a was found to be most active against HT‐29 (IC₅₀=4.28 μm ). Further biological assays demonstrated that compound 4a could induce cell cycle arrest at G1 phase and apoptosis in a dose‐dependent manner. In addition, compound 4a was found to upregulate pro‐apoptotic Bax, p53 and downregulate anti‐apoptotic Bcl‐2. All these results suggested that compound 4a is a potential candidate drug for the therapy of colon cancer.     

Boosting the Stable Na Storage Performance in 1D Oxysulfide

Exploring new structure prototypes and phases by material design, especially anode materials, is essential to develop high‐performance Na‐ion batteries. This study proposes a new anode, Na₂Cu_2.09O_0.50S₂, with a 1D crystal structure and outstanding Na storage performance. In view of the crystal structure of Na₂Cu_2.09O_0.50S₂, [Cu₄S₄] chains act as electrically conducting units enabling conductivity as high as 0.5 S cm^?1. The residual Na₄[CuO] chains act as ionically conducting units forming rich channels for the fast conduction of Na ions as well as maintaining the structural stability even after Na ion extraction. Additional ball milling on the as‐prepared Na₂Cu_2.09O_0.50S₂ significantly decreases its grain size, achieving a capacity of 588 mA h g^?1 with a high initial Coulombic efficiency of 93% at 0.2 A g^?1. Moreover, the Na₂Cu_2.09O_0.50S₂ anode demonstrates outstanding rate capability (408 mA h g^?1 at 2 A g^?1) and extending cyclic performance (82% of capacity retention after 400 cycles). The general structural design idea based on functional units may offer a new avenue to new electrode materials.     

Same but different–Scale up and numbering up in electrobiotechnology and photobiotechnology

Facing energy problems, there is a strong demand for new technologies dealing with the replacement of fossil fuels. The emerging fields of biotechnology, photobiotechnology and electrobiotechnology, offer solutions for the production of fuels, energy, or chemicals using renewable energy sources (light or electrical current e.g. produced by wind or solar power) or organic (waste) substrates. From an engineering point of view both technologies have analogies and some similar challenges, since both light and electron transfer are primarily surface‐dependent. In contrast to that, bioproduction processes are typically volume dependent. To allow large scale and industrially relevant applications of photobiotechnology and electrobiotechnology, this opinion first gives an overview over the current scales reached in these areas. We then try to point out the challenges and possible methods for the scale up or numbering up of the reactors used. It is shown that the field of photobiotechnology is by now much more advanced than electrobiotechnology and has achieved industrial applications in some cases. We argue that transferring knowledge from photobiotechnology to electrobiotechnology can speed up the development of the emerging field of electrobiotechnology. We believe that a combination of scale up and numbering up, as it has been shown for several photobiotechnological reactors, may well lead to industrially relevant scales in electrobiotechnological processes allowing an industrial application of the technology in near future.     

A global assessment of primate responses to landscape structure

Land‐use change modifies the spatial structure of terrestrial landscapes, potentially shaping the distribution, abundance and diversity of remaining species assemblages. Non‐human primates can be particularly vulnerable to landscape disturbances, but our understanding of this topic is far from complete. Here we reviewed all available studies on primates' responses to landscape structure. We found 34 studies of 71 primate species (24 genera and 10 families) that used a landscape approach. Most studies (82%) were from Neotropical forests, with howler monkeys being the most frequently studied taxon (56% of studies). All studies but one used a site‐landscape or a patch‐landscape study design, and frequently (34% of studies) measured landscape variables within a given radius from the edge of focal patches. Altogether, the 34 studies reported 188 responses to 17 landscape‐scale metrics. However, the majority of the studies (62%) quantified landscape predictors within a single spatial scale, potentially missing significant primate–landscape responses. To assess such responses accurately, landscape metrics need to be measured at the optimal scale, i.e. the spatial extent at which the primate–landscape relationship is strongest (so‐called ‘scale of effect’). Only 21% of studies calculated the scale of effect through multiscale approaches. Interestingly, the vast majority of studies that do not assess the scale of effect mainly reported null effects of landscape structure on primates, while most of the studies based on optimal scales found significant responses. These significant responses were primarily to landscape composition variables rather than landscape configuration variables. In particular, primates generally show positive responses to increasing forest cover, landscape quality indices and matrix permeability. By contrast, primates show weak responses to landscape configuration. In addition, half of the studies showing significant responses to landscape configuration metrics did not control for the effect of forest cover. As configuration metrics are often correlated with forest cover, this means that documented configuration effects may simply be driven by landscape‐scale forest loss. Our findings suggest that forest loss (not fragmentation) is a major threat to primates, and thus, preventing deforestation (e.g. through creation of reserves) and increasing forest cover through restoration is critically needed to mitigate the impact of land‐use change on our closest relatives. Increasing matrix functionality can also be critical, for instance by promoting anthropogenic land covers that are similar to primates' habitat.     

Selection and optimization of a suitable pretreatment method for miscanthus and poplar raw material

Miscanthus and poplar are very promising second‐generation feedstocks due to the high growth rates and low nutrient demand. The aim of the study was to develop a systematic approach for choosing suitable pretreatment methods evaluated with the modified severity factor (log ). Optimal pretreatment results in a high delignification grade, low cellulose solubilization and increased accessibility for enzymatic hydrolysis while revealing minimal log values. In order to do so, several reaction approaches were compared. Acid‐catalyzed organosolv processing carried out for miscanthus and poplar revealed the highest delignification grade leading to a relatively high glucose yield after enzymatic saccharification. In both cases, a design of experiments approach was used to study the influence of relevant parameters. Modeling the data resulted in the identification of optimum pretreatment conditions for miscanthus with concentrations of 0.16% H₂SO₄ and 50% EtOH at 185°C for a retention time of 60 min. Experimental validation of these conditions revealed an even higher delignification degree (88%) and glucose yield (85%) than predicted. 0.19% H₂SO₄ and 50% EtOH were determined as optimum concentrations, 182°C and 48 min identified as optimum pretreatment conditions for poplar; the delignification degree was 84% and the resulting glucose yield 70%.