Analysis of the center of pressure displacement, ground reaction force and muscular activity during step exercises

Anterior Knee Pain (AKP) is considered as one of the most common, yet misunderstood, knee pathologies. The aim of this study was to evaluate the displacement area of the center of pressure, Ground Reaction Force (GRF), and the electromyography activity of the hip and the quadriceps muscles in healthy and AKP individuals during the step-up and step-down exercises. Both groups (Control group and AKP group) were composed of 15 volunteers submitted to the exercises on a force plate. The AKP group presented greater displacement area of the center of pressure for all the situations evaluated than the Control group (p < 0.05), as well as a lesser magnitude of the GRF during the step-down exercise. The AKP group presented lower electromyography activity than the Control group in all situations evaluated. AKP individuals do not have muscle imbalances; they present a lower electromyography activity of the stabilizing muscles of the patella and hip and show greater instability in activities such as step up and down compared to normal subjects.     

Is knee biomechanics different in uphill walking on different slopes for older adults with total knee replacement?

The purpose of this study was to investigate knee biomechanics in uphill walking on slopes of 5°, 10° and 15° for total knee replacement (TKR) patients. Twenty-five post-TKR patients and ten healthy controls performed five walking trials on level ground and different slopes on an instrumented ramp system. A 2 × 2 × 4 (limb × group × incline slope) mixed model ANOVA was used to examine selected variables. The peak knee extension moment (KEM) was greater in 15° uphill walking compared to level, 5° and 10° uphill walking. TKR patients had lower peak KEM and smaller knee extension range of motion than healthy controls in all walking conditions. The Replaced Limb showed lower peak KEM in 10° and 15° uphill walking than the Non-replaced Limb and smaller knee extension range of motion (ROM) in 10° uphill walking. Knee extension and abduction ROM increased with increased incline angles. The greater peak loading-response vertical ground reaction force was found in level walking compared to three levels of uphill walking. The peak loading-response knee abduction moment was greater in level walking compared to 10° and 15° uphill walking. However, the medial knee contact force was greater in non-replaced limb compared to replaced limb in 10° and 15° uphill walking. The results suggest 5° uphill walking may have the potential to become a safe exercise for unilateral TKR patients.     

The effect of femoral component malrotation on patellar biomechanics

Patellofemoral complications are among the important reasons for revision knee arthroplasty. Femoral component malposition has been implicated in patellofemoral maltracking, which is associated with anterior knee pain, subluxation, fracture, wear, and aseptic loosening. Rotating-platform mobile bearings compensate for malrotation between the tibial and femoral components and may, therefore, reduce any associated patellofemoral maltracking. To test this hypothesis, we developed a dynamic model of quadriceps-driven open-kinetic-chain extension in a knee implanted with arthroplasty components. The model was validated using tibiofemoral and patellofemoral kinematics and forces measured in cadaver knees. Knee kinematics and patellofemoral forces were measured after simulating malrotation (±3°) of the femoral component. Rotational alignment of the femoral component affected tibial rotation near full extension and tibial adduction at higher flexion angles. External rotation of the femoral component increased patellofemoral lateral tilt, lateral shift, and lateral shear forces. Up to 21° of bearing rotation relative to the tibia was noted in the rotating-bearing condition. However, the rotating bearing had minimal effect in reducing the patellofemoral maltracking or shear induced by femoral component rotation. The rotating platform does not appear to be forgiving of malalignment of the extensor mechanism resulting from femoral component malrotation. These results support the value of improving existing methodologies for accurate femoral component alignment in total knee arthroplasty.     

Knee joint passive stiffness and moment in sagittal and frontal planes markedly increase with compression

Knee joints are subject to large compression forces in daily activities. Due to artefact moments and instability under large compression loads, biomechanical studies impose additional constraints to circumvent the compression position–dependency in response. To quantify the effect of compression on passive knee moment resistance and stiffness, two validated finite element models of the tibiofemoral (TF) joint, one refined with depth-dependent fibril-reinforced cartilage and the other less refined with homogeneous isotropic cartilage, are used. The unconstrained TF joint response in sagittal and frontal planes is investigated at different flexion angles (0°, 15°, 30° and 45°) up to 1800 N compression preloads. The compression is applied at a novel joint mechanical balance point (MBP) identified as a point at which the compression does not cause any coupled rotations in sagittal and frontal planes. The MBP of the unconstrained joint is located at the lateral plateau in small compressions and shifts medially towards the inter-compartmental area at larger compression forces. The compression force substantially increases the joint moment-bearing capacities and instantaneous angular rigidities in both frontal and sagittal planes. The varus–valgus laxities diminish with compression preloads despite concomitant substantial reductions in collateral ligament forces. While the angular rigidity would enhance the joint stability, the augmented passive moment resistance under compression preloads plays a role in supporting external moments and should as such be considered in the knee joint musculoskeletal models.     

Translation of biomechanical concepts in bone tissue engineering: from animal study to revision knee arthroplasty

Bone defects in revision knee arthroplasty are often located in load-bearing regions. The goal of this study was to determine whether a physiologic load could be used as an in situ osteogenic signal to the scaffolds filling the bone defects. In order to answer this question, we proposed a novel translation procedure having four steps: (1) determining the mechanical stimulus using finite element method, (2) designing an animal study to measure bone formation spatially and temporally using micro-CT imaging in the scaffold subjected to the estimated mechanical stimulus, (3) identifying bone formation parameters for the loaded and non-loaded cases appearing in a recently developed mathematical model for bone formation in the scaffold and (4) estimating the stiffness and the bone formation in the bone-scaffold construct. With this procedure, we estimated that after 3 years mechanical stimulation increases the bone volume fraction and the stiffness of scaffold by 1.5- and 2.7-fold, respectively, compared to a non-loaded situation.     

A procedure for estimating the relevant forces in the human knee using a four-bar mechanism

Knee injuries, especially those that affect the cruciate and lateral ligaments, are one of the most serious and frequent pathologies that affect the lower human extremity. Hence, the aim of this study is to develop a dynamic model for the lower extremity capable of estimating forces, forces in the cruciate and collateral ligaments and those normal to the articular cartilage, generated in the knee. The proposed model considers a four-bar mechanism in the knee, a spherical joint in the pelvis and a revolute one in the ankle. The four-bar mechanism is obtained by a synthesis process. The dynamic model includes the inertial properties of the femur, tibia, patella and the foot, the ground reaction force and the most important muscles in the knee. Muscle forces are estimated using an optimisation technique. Results from the application of the model on a real human task are presented.     

Patellar tendon and hamstring moment-arms and cross-sectional area in patients with anterior cruciate ligament reconstruction and controls

The purpose of this study was to examine the moment-arm and cross-sectional area (CSA) of the patellar tendon (PT) and the hamstrings after anterior cruciate ligament (ACL) reconstruction. The right knee of five males who underwent ACL reconstruction with a PT graft and five age-matched controls was scanned using magnetic resonance image scans. Based on three-dimensional (3D) solids of the PT, CSAs and moment-arms of semitendinous (ST), biceps femoris (BF) long head and semimembranosus (SM) were estimated. Analysis of variance indicated no significant group differences in muscle moment-arms (p>0.05). 3D moment-arms of PT, ST and BF were significantly lower than the corresponding 2D values (p < 0.05). The ACL group displayed a significantly higher maximum BF CSA, a lower ST CSA (p < 0.05) but similar PT and SM CSAs compared with controls. It is concluded that any alterations in PT properties 1 year after harvesting do not affect knee muscle moment-arms compared with age-matched controls. Moment-arm estimation differed between 3D and 2D data, although it did not affect comparisons between ACL reconstruction group and controls. Design of rehabilitation programmes should take into consideration a potential alteration in hamstring morphology following surgery with a PT graft.     

Efficient probabilistic representation of tibiofemoral soft tissue constraint

Verified and efficient representations of knee ligamentous constraints are essential to forward-dynamic models for prediction of knee mechanics. The objectives of this study were to develop an efficient probabilistic representation of knee ligamentous constraint using the advanced mean value (AMV) probabilistic approach, and to compare the AMV representation with the gold standard Monte Carlo (MC) approach. Specifically, the effects of inherent uncertainty in ligament stiffness, reference strain and attachment site locations on joint constraint were assessed. An explicit finite element model of the knee was evaluated under a series of anterior–posterior (AP) and internal–external (IE) loading at full extension and 90° flexion. Distributions of AP and IE laxity were predicted using experimentally-based levels of ligament parameter variability. Importance factors identified the critical properties affecting the predicted bounds, and agreed with reported ligament recruitment. The AMV method agreed closely with MC results with a four-fold reduction in computation time.     

Dynamic simulation of tibial tuberosity realignment: model evaluation

This study was performed to evaluate a dynamic multibody model developed to characterize the influence of tibial tuberosity realignment procedures on patellofemoral motion and loading. Computational models were created to represent four knees previously tested at 40°, 60°, and 80° of flexion with the tibial tuberosity in a lateral, medial and anteromedial positions. The experimentally loaded muscles, major ligaments of the knee, and patellar tendon were represented. A repeated measures ANOVA with post-hoc testing was performed at each flexion angle to compare data between the three positions of the tibial tuberosity. Significant experimental trends for decreased patella flexion due to tuberosity anteriorization and a decrease in the lateral contact force due to tuberosity medialization were reproduced computationally. The dynamic multibody modeling technique will allow simulation of function for symptomatic knees to identify optimal surgical treatment methods based on parameters related to knee pathology and pre-operative kinematics.     

Could passive knee laxity be related to active gait mechanics? An exploratory computational biomechanical study using probabilistic methods

Improving total knee replacement (TKR) requires better understanding of the many factors influencing clinical outcomes. Recently, probabilistic studies have investigated the influence of variability for individual TKR activities. This study demonstrates conceptually how probabilistic studies might further provide a framework to explore relationships not just within but between multiple different activities, e.g. intra-operative passive laxity drawer loading and post-operative active gait. Two implants were compared using simulated ISO-gait and passive laxity loading, with factors including mal-positioning and soft-tissue constraint varied using Monte-Carlo analysis. The results illustrate that correlations between different activities can be quantified; this demonstration study suggests further research is justified (with detailed clinically representative models) to explore the relationship between passive and active mechanics for specific in vivo conditions. Probabilistics is a key enabling methodology for achieving this goal. In future, exploring correlations between different activities may facilitate a better holistic understanding of TKR function.