B3LYP/6-311++G* * study of structure and spin-spin coupling constant in heparin disaccharide

Structures of heparin disaccharide have been analyzed by DFT using the B3LYP/6-311++G( * *) method. The optimized geometries of two forms of this disaccharide, differing in the conformation ((1)C(4) and (2)S(0)) of the IdoA2S residue, confirmed considerable influences of the sulfate and the carboxylate groups upon the pyranose ring geometries. The computed energies showed that disaccharide having the (1)C(4) form of the IdoA2S residue is more stable than that with the (2)S(0) form. Interatomic distances, bond and torsion angles showed that interconversion of the IdoA2S residue results in geometry changes in the GlcN,6S residue as well. Three-bond proton-proton and proton-carbon spin-spin coupling constants computed for both forms agree with the experimental data and indicate that only two chair forms contribute to the conformational equilibrium in disaccharide. Influences of the charged groups upon the magnitudes of spin-spin coupling constants are also discussed.     

不同酿酒酵母菌株来源异麦芽糖酶IMA1的克隆、表达及表征

[目的]异麦芽糖酶IMA1在充分利用含有α-1,6-O-糖苷键的低聚糖中起着关键作用。[方法]在本研究中,对来自4株酿酒酵母菌株（包括3株嗜酸性菌株）来源的异麦芽糖酶IMA1进行克隆、表达、纯化和表征。[结果]研究发现,4种异麦芽糖酶IMA1表现出类似的pH和温度依赖性,但表现出不同的动力学参数和热稳定性。IMA1-A对α-MG（α-甲基葡糖苷）表现出最高的结合亲和力、转换数、催化效率和热稳定性。结构和序列分析表明,2个远离活性位点和底物结合位点的氨基酸的差异对异麦芽糖酶IMA1的动力学参数和热稳定性有重要影响。[结论]本研究结果对进一步研究异麦芽糖酶IMA1的结构-功能关系奠定了基础。     

Hybrid physics-based and data-driven modeling for bioprocess online simulation and optimization

Model-based online optimization has not been widely applied to bioprocesses due to the challenges of modeling complex biological behaviors, low-quality industrial measurements, and lack of visualization techniques for ongoing processes. This study proposes an innovative hybrid modeling framework which takes advantages of both physics-based and data-driven modeling for bioprocess online monitoring, prediction, and optimization. The framework initially generates high-quality data by correcting raw process measurements via a physics-based noise filter (a generally available simple kinetic model with high fitting but low predictive performance); then constructs a predictive data-driven model to identify optimal control actions and predict discrete future bioprocess behaviors. Continuous future process trajectories are subsequently visualized by re-fitting the simple kinetic model (soft sensor) using the data-driven model predicted discrete future data points, enabling the accurate monitoring of ongoing processes at any operating time. This framework was tested to maximize fed-batch microalgal lutein production by combining with different online optimization schemes and compared against the conventional open-loop optimization technique. The optimal results using the proposed framework were found to be comparable to the theoretically best production, demonstrating its high predictive and flexible capabilities as well as its potential for industrial application.     

Chromatographic approach to study the configurational stability of Ni(II) complexes of amino‐acid Schiff bases possessing stereogenic nitrogen

Herein, we disclose the design of a model Ni(II) complex of glycine Schiff base possessing single‐nitrogen stereogenic center, which was successfully used for high‐performance liquid chromatography (HPLC)‐assisted assessment of its configurational stability. The major finding is that the configurational stability of the Ni(II)‐coordinated nitrogen is profoundly dependent on the reaction conditions used, in particular the solvent, and can range from inconsequential (t_½ less than 5 min) to virtually completely stable (t_½ 90 y). The discovery reported in this study most likely to be of certain theoretical and synthetic value.     

亚热带河口养殖塘沉积物有机碳矿化及其影响因子

亚热带河口的养殖塘是温室气体二氧化碳(CO2)的重要排放源,但其沉积物有机碳矿化动力学特征目前尚未厘清.以我国东南沿海亚热带闽江、木兰溪以及九龙江河口区的6个凡纳滨对虾(Penaeus vannamei)养殖塘为研究对象,对沉积物取样,并进行为期60 d的室内厌氧培养,对养殖塘沉积物CO2累积产量曲线利用一阶动力学模型...     

Novel kinetic analysis of enzymatic dipeptide synthesis: effect of pH and substrates on thermolysin catalysis.

The point of maximum activity is specific to a particular substrate-enzyme system but may vary with different substrates and the same enzyme. The specificity of enzymes has, however, been generally reported only at their "optimal" pH. In this article, we introduce the Michaelis-Menten equation taking pH into account, and apply it to the pH-activity profile of the thermolysin-catalyzed dipeptide synthesis. It has been reported to date that the pH-activity profile of thermolysin follows a bell-shaped curve with a maximal activity at or near pH 7.0. The profiles obtained in this study, however, indicated that the optimal pH varied from 5.8 (for F-AspPheOMe) to 7.3 (for Z-ArgPheOMe), and the order of thermolysin activity was greatly dependent on the pH of reaction media. We have succeeded in evaluating the substrates-induced change of the dissociation states of the active site of thermolysin using the hydrophobicity of substrates. We have obtained apparent kinetic parameters which are independent of the pH of reaction media. The apparent specificity of thermolysin which were independent of pH of the reaction media was in order L-Leu > L-Asp > L-Arg > L-Ala > L-Gly > L-Val and Z > Boc = F at P1 and P2 positions, respectively.     

Determination of the maximum specific uptake capacities for glucose and oxygen in glucose-limited fed-batch cultivations of Escherichia coli

A simple pulse-based method for the determination of the maximum uptake capacities for glucose and oxygen in glucose limited cultivations of E. coli is presented. The method does not depend on the time-consuming analysis of glucose or acetate, and therefore can be used to control the feed rate in glucose limited cultivations, such as fed-batch processes. The application of this method in fed-batch processes of E. coli showed that the uptake capacity for neither glucose nor oxygen is a constant parameter, as often is assumed in fed-batch models. The glucose uptake capacity decreased significantly when the specific growth rate decreased below 0.15 h(-1) and fell to about 0.6 mmol g(-1) h(-1) (mmol per g cell dry weight and hour) at the end of fed-batch fermentations, where specific growth rate was approximately 0.02 h(-1). The oxygen uptake capacity started to decrease somewhat earlier when specific growth rate declined below 0.25 h(-1) and was 5 mmol g(-1) h(-1) at the end of the fermentations. The behavior of both uptake systems is integrated in a dynamic model which allows a better fitting of experimental values for glucose in fed-batch processes in comparison to generally used unstructured kinetic models.     

Kinetic resolution of chiral amines with omega-transaminase using an enzyme-membrane reactor

A kinetic resolution process for the production of chiral amines was developed using an enzyme-membrane reactor (EMR) and a hollow-fiber membrane contactor with (S)-specific omega-transaminases (omega-TA) from Vibrio fluvialis JS17 and Bacillus thuringiensis JS64. The substrate solution containing racemic amine and pyruvate was recirculated through the EMR and inhibitory ketone product was selectively extracted by the membrane contactor until enantiomeric excess of (R)-amine exceeded 95%. Using the reactor set-up with flat membrane reactor (10-mL working volume), kinetic resolutions of alpha-methylbenzylamine (alpha-MBA) and 1-aminotetralin (200 mM, 50 mL) were carried out. During the operation, concentration of ketone product, i.e., acetophenone or alpha-tetralone, in a substrate reservoir was maintained below 0.1 mM, suggesting efficient removal of the inhibitory ketone by the membrane contactor. After 47 and 32.5 h of operation using 5 U/mL of enzyme, 98.0 and 95.5% ee of (R)-alpha-MBA and (R)-1-aminotetralin were obtained at 49.5 and 48.8% of conversion, respectively. A hollow-fiber membrane reactor (39-mL working volume) was used for a preparative-scale kinetic resolution of 1-aminotetralin (200 mM, 1 L). After 133 h of operation, enantiomeric excess reached 95.6% and 14.3 g of (R)-1-aminotetralin was recovered (97.4% of yield). Mathematical modeling of the EMR process including the membrane contactor was performed to evaluate the effect of residence time. The simulation results suggest that residence time should be short to maintain the concentration of the ketone product in EMR sufficiently low so as to decrease conversion per cycle and, in turn, reduce the inhibition of the omega-TA activity.     

Initiation and Inhibition of Free Radical Processes in H2O2–Metmyoglobin (Methemoglobin)–2,2"-Azino-bis-(3-Ethylbenzthiazoline-6-Sulfonic Acid) Systems

Rates of free radical initiation were determined at 20°C in 10 mM phosphate buffer (pH 7.4) in the systems metmyoglobin (methemoglobin)–H₂O₂ using 2,2"-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) as the diammonium salt (ABTS). The catalytic activity of MetMb was 2-3-fold higher than that of MetHb. The process can be described by the Michaelis–Menten equation, from which effective values of K _m and V _max were calculated. Comparative kinetic studies on the inhibition of ABTS oxidation were carried out using Trolox, propylgallate (PG), polydisulfide of gallic acid (poly(DSG)), polydisulfide of (2-amino-4-nitrophenol) (poly(ADSNP)), and its conjugate with human serum albumin (HSA–poly(ADSNP)). The inhibitors were characterized by inhibition constants K _i and stoichiometric inhibition coefficients f (the number of radicals terminated by a single molecule of inhibitor). The minimum K _i and the maximum f values were obtained for poly(DSG), and in the system of MetHb–H₂O₂–ABTS they were 0.08 M and 27.5, respectively. According to their antiradical activities, the inhibitors can be arranged as follows: poly(DSG) > poly(ADSNP) > PG > Trolox. PG, poly(DSG), poly(ADSNP), and its conjugate with HSA are suggested as calibrators, i.e., inhibition standards for evaluation of antioxidant status of biological fluids in possible test systems based on the free radical-generating pair MetMb–H₂O₂ with ABTS as the acceptor of the active radicals.     

Real-time measurements of dark substrate catalysis

We have developed a novel procedure to monitor the real-time cleavage of natural unmodified peptides (dark substrates). In the competition-based assay, the initial cleavage rate of a fluorogenic peptide substrate is measured in the presence of a second substrate that is not required to exhibit any optical property change upon cleavage. Using a unique experimental design and steady-state enzyme kinetics for a two-substrate system, we were able to determine both Km and k(cat) values for cleavage of the dark substrate. The method was applied to HIV-1 protease and to the V82F/I84V drug resistant mutant enzyme. Using two different substrates, we showed that the kinetic parameters derived from the competition assay are in good agreement with those determined independently using standard direct assay. This method can be applied to other enzyme systems as long as they have one substrate for which catalysis can be conveniently monitored in real time.