Effect of surface modification on hydration kinetics of carbamazepine anhydrate using isothermal microcalorimetry

The purpose of this research was to improve the stability of carbamazepine (CBZ) bulk powder under high humidity by surface modification. The surface-modified anhydrates of CBZ were obtained in a specially designed surface modification apparatus at 60°C via the adsorption of n-butanol, and powder x-ray diffraction, Fourier-Transformed Infrared spectra, and differential scanning calorimetry were used to determine the crystalline characteristics of the samples. The hydration process of intact and surface-modified CBZ anhydrate at 97% relative humidity (RH) and 40±1°C was automatically monitored by using isothermal microcalorimetry (IMC). The dissolution test for surface-modified samples (20 mg) was performed in 900 mL of distilled water at 37±0.5°C with stirring by a paddle at 100 rpm as in the Japanese Pharmacopoeia XIII. The heat flow profiles of hydration of intact and surface-modified CBZ anhydrates at 97% RH by using IMC profiles showed a maximum peak at around 10 hours and 45 hours after 0 and 10 hours of induction, respectively. The result indicated that hydration of CBZ anhydrate was completely inhibited at the initial stage by surface modification of n-butanol and thereafter transformed into dihydrate. The hydration of surface-modified samples followed a 2-dimensional phase boundary process with an induction period (IP). The IP of intact and surface-modified samples decreased with increase of the reaction temperature, and the hydration rate constant (k) increased with increase of the temperature. The crystal growth rate constants of nuclei of the intact sample were significantly larger than the surface-modified samples at each temperature. The activation energy (E) of nuclei formation and crystal growth process for hydration of surface-modified CBZ anhydrate were evaluated to be 20.1 and 32.5 kJ/mol, respectively, from Arrhenius plots, but the Es of intact anhydrate were 56.3 and 26.8 kJ/mol, respectively. The dissolution profiles showed that the surface-modified sample dissolved faster than the intact sample at the initial stage. The dissolution kinetics were analyzed based on the Hixon-Crowell equation, and the dissolution rate constants for intact and surface-modified anhydrates were found to be 0.0102±0.008 mg^1/3 min⁻¹ and 0.1442±0.0482 mg^1/3·min⁻¹. The surface-modified anhydrate powders were more stable than the nonmodified samples under high humidity and showed resistance against moisture. However, surface modification induced rapid dissolution in water compared to the control.     

Measurement of dissociation constants of inhibitors binding to Src SH2 domain protein by non-covalent electrospray ionization mass spectrometry

A mass spectrometric protocol for identifying ligands with a wide range of affinities (3-101 microM) and quantitative spectral analysis for non-covalent interactions have been developed using Src SH2 as a target. Dissociation constants of five compounds, three with a phospho moiety, one with a sulphonic acid group and one with carboxylic acid groups only, were determined using one-ligand one-binding-site, two-ligands one-binding site and one-ligand two-binding-sites models. The Kd values determined by ESI-MS of the three compounds containing the phospho moiety (3.2-7.9 microM) were comparable to those obtained from a solution equilibrium fluorescence polarization assay. The compound with a sulphonate group is a much weaker binding ligand (Kd=101 microM by ESI, >300 microM by FP) towards the Src SH2 protein. Two complexes with different stoichiometric ratios 1:1 and 2:1 (ligand-protein) were observed by ESI-MS for the ligand GIXXX630X. Analysis of binding isotherms indicated the presence of two binding sites for the ligand with Kd values of 9.3 and 193 microM. These data confirmed that, for these polar compounds, non-covalent ESI-MS can measure affinity which very closely reflects the affinity measured under true solution equilibrium conditions. ESI-MS has several key advantages over many solution methods: it can identify the existence of and measure the affinity of complexes other than simple 1:1 ligand-enzyme complexes. Moreover, ESI-MS competition experiments can be readily performed to yield data on whether two ligands bind simultaneously or competitively at the same time as measuring the affinity of the ligand.     

NMR experiments for the sign determination of homonuclear scalar and residual dipolar couplings

A modified version of the JHH-TOCSY experiment, `signed COSY', is presented that allows the determination of the sign of residual dipolar ¹H-¹H coupling constants with respect to the sign of one-bond ¹H-X coupling constants in linear three-spin systems X-¹H-¹H, where X = ¹³C or ¹⁵N. In contrast to the original JHH-TOCSY experiments, the signs of J _HH couplings may be determined for CH₂-CH₂ moieties and for uniformly ¹³C/¹⁵N-labelled samples. In addition, sensitivity is enhanced, diagonal peaks are suppressed and cross peaks are observed only between directly coupled protons, as in a COSY spectrum.     

Nicotinic receptor fourth transmembrane domain: hydrogen bonding by conserved threonine contributes to channel gating kinetics

The fourth transmembrane domain (M4) of the nicotinic acetylcholine receptor (AChR) contributes to the kinetics of activation, yet its close association with the lipid bilayer makes it the outermost of the transmembrane domains. To investigate mechanistic and structural contributions of M4 to AChR activation, we systematically mutated alphaT422, a conserved residue that has been labeled by hydrophobic probes, and evaluated changes in rate constants underlying ACh binding and channel gating steps. Aromatic and nonpolar mutations of alphaT422 selectively affect the channel gating step, slowing the rate of opening two- to sevenfold, and speeding the rate of closing four- to ninefold. Additionally, kinetic modeling shows a second doubly liganded open state for aromatic and nonpolar mutations. In contrast, serine and asparagine mutations of alphaT422 largely preserve the kinetics of the wild-type AChR. Thus, rapid and efficient gating of the AChR channel depends on a hydrogen bond involving the side chain at position 422 of the M4 transmembrane domain.     

Bypassing the kinetic trap of serpin protein folding by loop extension

The native form of some proteins such as strained plasma serpins (serine protease inhibitors) and the spring-loaded viral membrane fusion proteins are in a metastable state. The metastable native form is thought to be a folding intermediate in which conversion into the most stable state is blocked by a very high kinetic barrier. In an effort to understand how the spontaneous conversion of the metastable native form into the most stable state is prevented, we designed mutations of alpha1-antitrypsin, a prototype serpin, which can bypass the folding barrier. Extending the reactive center loop of alpha1-antitrypsin converts the molecule into a more stable state. Remarkably, a 30-residue loop extension allows conversion into an extremely stable state, which is comparable to the relaxed cleaved form. Biochemical data strongly suggest that the strain release is due to the insertion of the reactive center loop into the major beta-sheet, A sheet, as in the known stable conformations of serpins. Our results clearly show that extending the reactive center loop is sufficient to bypass the folding barrier of alpha1-antitrypsin and suggest that the constrain held by polypeptide connection prevents the conversion of the native form into the lowest energy state.     

Deleterious effects of beta-branched residues in the S1 specificity pocket of Streptomyces griseus proteinase B (SGPB): crystal structures of the turkey ovomucoid third domain variants Ile18I, Val18I, Thr18I, and Ser18I in complex with SGPB

Turkey ovomucoid third domain (OMTKY3) is a canonical inhibitor of serine proteinases. Upon complex formation, the inhibitors fully exposed P1 residue becomes fully buried in the preformed cavity of the enzyme. All 20 P1 variants of OMTKY3 have been obtained by recombinant DNA technology and their equilibrium association constants have been measured with six serine proteinases. To rationalize the trends observed in this data set, high resolution crystal structures have been determined for OMTKY3 P1 variants in complex with the bacterial serine proteinase, Streptomyces griseus proteinase B (SGPB). Four high resolution complex structures are being reported in this paper; the three beta-branched variants, Ile18I, Val18I, and Thr18I, determined to 2.1, 1.6, and 1.7 A resolution, respectively, and the structure of the Ser18I variant complex, determined to 1.9 A resolution. Models of the Cys18I, Hse18I, and Ape18I variant complexes are also discussed. The beta-branched side chains are not complementary to the shape of the S1 binding pocket in SGPB, in contrast to that of the wild-type gamma-branched P1 residue for OMTKY3, Leu18I. Chi1 angles of approximately 40 degrees are imposed on the side chains of Ile18I, Val18I, and Thr18I within the S1 pocket. Dihedral angles of +60 degrees, -60 degrees, or 180 degrees are more commonly observed but 40 degrees is not unfavorable for the beta-branched side chains. Thr18I Ogamma1 also forms a hydrogen bond with Ser195 Ogamma in this orientation. The Ser18I side chain adopts two alternate conformations within the S1 pocket of SGPB, suggesting that the side chain is not stable in either conformation.     

Copper binding to octarepeat peptides of the prion protein monitored by mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) was used to measure the binding of Cu2+ ions to synthetic peptides corresponding to sections of the sequence of the mature prion protein (PrP). ESI-MS demonstrates that Cu2+ is unique among divalent metal ions in binding to PrP and defines the location of the major Cu2+ binding site as the octarepeat region in the N-terminal domain, containing multiple copies of the repeat ProHisGlyGlyGlyTrpGlyGln. The stoichiometries of the complexes measured directly by ESI-MS are pH dependent: a peptide containing four octarepeats chelates two Cu2+ ions at pH 6 but four at pH 7.4. At the higher pH, the binding of multiple Cu2+ ions occurs with a high degree of cooperativity for peptides C-terminally extended to incorporate a fifth histidine. Dissociation constants for each Cu2+ ion binding to the octarepeat peptides, reported here for the first time, are mostly in the low micromolar range; for the addition of the third and fourth Cu2+ ions to the extended peptides at pH 7.4, K(D)'s are <100 nM. N-terminal acetylation of the peptides caused some reduction in the stoichiometry of binding at both pH's. Cu2+ also binds to a peptide corresponding to the extreme N-terminus of PrP that precedes the octarepeats, arguing that this region of the sequence may also make a contribution to the Cu2+ complexation. Although the structure of the four-octarepeat peptide is not affected by pH changes in the absence of Cu2+, as judged by circular dichroism, Cu2+ binding induces a modest change at pH 6 and a major structural perturbation at pH 7.4. It is possible that PrP functions as a Cu2+ transporter by binding Cu2+ ions from the extracellular medium under physiologic conditions and then releasing some or all of this metal upon exposure to acidic pH in endosomes or secondary lysosomes.     

Kinetics of Ampicillin Synthesis Catalyzed by Penicillin Acylase from E. coli in Homogeneous and Heterogeneous Systems. Quantitative Characterization of Nucleophile Reactivity and Mathematical Modeling of the Process

Kinetic regularities of the enzymatic acyl group transfer reactions have been studied using ampicillin synthesis catalyzed by E. coli penicillin acylase as an example. It was shown that ampicillin synthesis proceeds through the formation of an acylenzyme–nucleophile complex capable of undergoing hydrolysis. The relative nucleophile reactivity of 6-aminopenicillanic acid (6-APA) is a complex parameter dependent on the nucleophile concentration. The kinetic analysis showed that the maximum yield of antibiotic being synthesized depended only on the nucleophile reactivity of 6-APA, the ratio between the enzyme reactivities with respect to the target product and acyl donor, and the initial concentrations of reagents. The parameters characterizing the nucleophile reactivity of 6-APA have been determined. The algorithm of modeling the enzymatic synthesis has been elaborated. The proposed algorithm allows the kinetics of the process not only in homogeneous, but also in heterogeneous (aqueous solution–precipitate) systems to be quantitatively predicted and described based on experimental values of parameters of the reaction. It was shown that in heterogeneous aqueous solution–precipitate systems PA-catalyzed ampicillin synthesis proceeds much more efficiently compared to the homogeneous solution.     

Co-C force constants from resonance Raman spectra of alkylcobalamins: insensitivity to dimethylbenzylimidazole coordination

The Co-C stretching vibration has been identified in resonance Raman spectra of alkyl-cobalamins, via isotope substitution, permitting estimation of the Co-C force constants, f = 1.85, 1.77 and 1.50 mdyn Å⁻¹ for methyl-, ethyl- and deoxyadenosyl-cobalamin, respectively (ν_Co-C = 506, 471 and 442/429 cm⁻¹). These values scale with the reported bond dissociation energies, and support the view that the Co-C bond weakens with increasing bulk of the alkyl group due to steric interaction with the corrin ring. However, the force constants are unaffected by dissociation of the dimethylbenzimidazole ligand at low pH, even though the bond dissociation energy rises significantly upon DMB dissociation in AdoCbl. This increase must therefore reflect destabilization of the Co^II product, rather than Co-C bond strengthening in the AdoCbl ground state. The insensitivity of the force constants to dimethylbenzimidazole dissociation implies that the steric effect of DMB coordination is not transmitted to the Co-C bond by the corrin ring. Consistent with this interpretation, the RR frequencies of the corrin ring modes are minimally perturbed by DMB dissociation, supporting earlier NMR results that indicated little change in the corrin conformation.     

Activation of Shaker Potassium Channels : III. An Activation Gating Model for Wild-Type and V2 Mutant Channels

A functional kinetic model is developed to describe the activation gating process of the Shaker potassium channel. The modeling in this paper is constrained by measurements described in the preceding two papers, including macroscopic ionic and gating currents and single channel ionic currents. These data were obtained from the normally activating wild-type channel as well as a mutant channel V2, in which the leucine at position 382 has been mutated to a valine. Different classes of models that incorporate Shaker''s symmetrical tetrameric structure are systematically examined. Many simple gating models are clearly inadequate, but a model that can account for all of the qualitative features of the data has the channel open after its four subunits undergo three transitions in sequence, and two final transitions that reflect the concerted action of the four subunits. In this model, which we call Scheme 3+2′, the channel can also close to several states that are not part of the activation path. Channel opening involves a large total charge movement (10.8 e₀), which is distributed among a large number of small steps each with rather small charge movements (between 0.6 and 1.05 e₀). The final two transitions are different from earlier steps by having slow backward rates. These steps confer a cooperative mechanism of channel opening at Shaker''s activation voltages. In the context of Scheme 3+2′, significant effects of the V2 mutation are limited to the backward rates of the final two transitions, implying that L382 plays an important role in the conformational stability of the final two states.