Factors Affecting Penetrating Captive Bolt Gun Performance

Captive bolt stunning is used for rendering livestock insensible at slaughter. The mechanical factors relating to performance of 6 penetrating captive bolt gun (CBG) models were examined. The Matador Super Sécurit 3000 and the .25 Cash Euro Stunner had the highest kinetic energy values (443 J and 412 J, respectively) of the CBGs tested. Ninety percent (27/30) of CBGs held at a government gun repository (United Kingdom) were found to have performed at a normal standard for the model, while 53% (10/19) of commercial contractor CBGs tested were found to underperform for the gun model. When the .22 Cash Special was fired 500 times at 4 shots per min, the gun reached a peak temperature of 88.8°C after 2.05 hr. Repeat firing during extended periods significantly reduced the performance of the CBG. When deciding on the appropriate CBG/cartridge combination, the kinetic energy delivered to the head of the nonhuman animal, bolt penetration depth, and species/animal type must be considered. It is recommended that CBGs are routinely checked for wear to the bolt and barrel if they are repeatedly fired in a session.     

Five fundamental ways in which complex food webs may spiral out of control

Theory suggests that increasingly long, negative feedback loops of many interacting species may destabilize food webs as complexity increases. Less attention has, however, been paid to the specific ways in which these ‘delayed negative feedbacks’ may affect the response of complex ecosystems to global environmental change. Here, we describe five fundamental ways in which these feedbacks might pave the way for abrupt, large-scale transitions and species losses. By combining topological and bioenergetic models, we then proceed by showing that the likelihood of such transitions increases with the number of interacting species and/or when the combined effects of stabilizing network patterns approach the minimum required for stable coexistence. Our findings thus shift the question from the classical question of what makes complex, unaltered ecosystems stable to whether the effects of, known and unknown, stabilizing food-web patterns are sufficient to prevent abrupt, large-scale transitions under global environmental change.     

Lipase-catalyzed asymmetric synthesis of naphtho[2,3-c]furan-1(3H)-one derivatives by a one-pot dynamic kinetic resolution/intramolecular Diels–Alder reaction: Total synthesis of (−)-himbacine

One-pot sequential reactions using the acyl moieties installed by enzymatic dynamic kinetic resolution of alcohols have been little investigated. In this work, the acryloyl moiety installed via the lipase/oxovanadium combo-catalyzed dynamic kinetic resolution of a racemic dienol [4-(cyclohex-1-en-1-yl)but-3-en-2-ol or 1-(cyclohex-1-en-1-yl)but-2-en-1-ol] with a (Z)-3-(phenylsulfonyl)acrylate underwent an intramolecular Diels–Alder reaction in a one-pot procedure to produce an optically active naphtho[2,3-c]furan-1(3H)-one derivative (98% ee). This method was successfully applied to the asymmetric total synthesis of (?)-himbacine.     

Study on the Adsorption of Cr3+ by Peanut Shell: Adsorption Kinetics,Thermodynamics, and Isotherm Properties

The pollution of heavy metals in soil to the environment is becoming more and more serious, resulting in the reduction of crop production and the occurrence of medical accidents. In order to remove heavy metal ions from soil and reduce the harm of heavy metals to the environment, modified peanut shell was used to adsorb Cr³⁺ in this article. The effects of different adsorption conditions on the adsorption rate and adsorption capacity of Cr³⁺ on ZnCl₂ modified peanut shell were studied, the best adsorption conditions were explored, and the relationship of kinetics, thermodynamics and adsorption isotherm properties of adsorption process were explored. The results showed that the optimum adsorption pH value, dosage, initial concentration, adsorption temperature and contact time of ZnCl₂ modified peanut shell were 2.5, 2.5 g/L, 75 μg/mL, 25 °C and 40 min, respectively. The prepared materials were characterized and analyzed by scanning electron microscope (SEM) and X-ray diffraction (XRD) analyzer. It was concluded that the modified peanut shell had a good adsorption capacity to Cr³⁺. The kinetic study showed that the adsorption process of Cr³⁺ on peanut shell modified by zinc chloride was in accordance with the quasi-second-order kinetic model. The adsorption process belonged to exothermic reaction and belonged to spontaneous reaction process. In summary, it is proved that zinc chloride modified peanut shell can efficiently adsorb Cr³⁺, which can be used for the treatment of heavy metal wastes in industry, which is beneficial to environmental protection and avoid heavy metal pollution.     

Identifiability analysis and improvement of a tree water flow and storage model

A recently published tree water flow and storage model (RCGro) for simulating water transport dynamics in trees and related stem diameter variations was improved in order to better describe a data set gathered under mild drought stress conditions. Model improvements were carried out based on the results of a mathematical identifiability analysis. This analysis provided important information with respect to the balance between model complexity and data availability. Using the identifiability analysis results, we were able to (1) highlight weaknesses of the model; (2) obtain information on how the model could be reduced in some places, to improve its identifiability properties, and extended in others, to enhance model performance; (3) identify which measurements are necessary to optimally calibrate the model. The resulting improved model was less complex (contained less unidentifiable parameters), had better dynamic properties and was able to better describe the stress data set.     

Mass balancing in kinetic resolution: calculating yield and enantiomeric excess using chiral balance

When kinetic resolution is applied for the production of enantiomerically pure compounds, process options may be used which involve more than one chiral substrate and one chiral product, such as sequential or parallel enzymatic kinetic resolutions or hydrolysis of diastereomers. Although the relation between the yields (y) of the chiral compounds is straightforward in these cases, the relation between their enantiomeric excess (ee) values is not. Combining mass balances into a so-called chiral balance (Sigma y . ee(R) = 0) provides the relation between enantiomeric excess values in a useful manner. This chiral balance easily shows which nonmeasured enantiomeric excess values and yields can be calculated from measured values. The chiral balance is only valid when configurations at chiral centers are conserved. (c) 1995 John Wiley & Sons, Inc.     

A combined method for determining inhibition type, kinetic parameters, and inhibition coefficients for aerobic cometabolism of 1,1,1-trichloroethane by a butane-grown mixed culture.

A combined method for determining inhibition type, kinetic parameters, and inhibition coefficients is developed and presented. The method was validated by applying it to data obtained from batch kinetics of the aerobic cometabolism of 1,1,1-trichloroethane (1,1,1-TCA) by a butane-grown mixed culture. The maximum degradation rates (k(max)) and half-saturation coefficients (K(s)) were independently determined in single compound tests, and compared with those obtained from inhibition tests. The inhibition type was determined using direct linear plots at various substrate and inhibitor concentrations. Kinetic parameters (k(max) and K(s)) and inhibition coefficients (K(ic) and K(iu)) were determined by nonlinear least squares regression (NLSR) fits of the inhibition model determined from the direct linear plots. Initial guesses of the kinetic parameters for NLSR were determined from linearized inhibition equations that were derived from the correlations between apparent maximum degradation rates (k(app)(max)) and/or the apparent half-saturation coefficient (K(app)(s)) and the k(max), K(s), and inhibitor concentration (I(L)) for each inhibition equation. Two different inhibition types were indicated from the direct linear plots: competitive inhibition of 1,1,1-TCA on butane degradation, and mixed inhibition of 1,1,1-TCA transformation by butane. Good agreement was achieved between independently measured k(max) and K(s) values and those obtained from both NLSR and the linearized inhibition equations. The initial guesses of all the kinetic parameters determined from linear plots were in the range of the values estimated from NLSR analysis. Overall the results show that use of the direct linear plot method to identify the inhibition type, coupled with initial guesses from linearized plots for NLSR analysis, results in an accurate method for determining inhibition types and coefficients. Detailed studies with pure cultures and purified enzymes are needed to further demonstrate the utility of this method.