Differential susceptibility to hydrogen sulfide-induced apoptosis between PHLDA1-overexpressing oral cancer cell lines and oral keratinocytes: Role of PHLDA1 as an apoptosis suppressor

Hydrogen sulfide (H₂S) is a novel gasotransmitter that plays multiple biological roles in various body systems. In addition to its endogenous production, H₂S is produced by bacteria colonizing digestive organs, including the oral cavity. H₂S was previously shown to enhance pro-apoptotic effects in cancer cell lines, although the mechanisms involved remain unclear. To properly assess the anti-cancer effects of H₂S, however, investigations of apoptotic effects in normal cells are also necessary. The aims of this study were (1) to compare the susceptibility to H₂S-induced apoptosis between the oral cancer cell line Ca9-22 and oral keratinocytes that were derived from healthy gingiva, and (2) to identify candidate genes involved in the induction of apoptosis by H₂S. The susceptibility to H₂S-induced apoptosis in Ca9-22 cells was significantly higher than that in keratinocytes. H₂S exposure in Ca9-22 cells, but not keratinocytes, enhanced the expression of pleckstrin homology-like domain, family A, member 1 (PHLDA1), which was identified through a differential display method. In addition, PHLDA1 expression increased during actinomycin D-induced apoptosis in Ca9-22 cells. Knockdown of PHLDA1 expression by small interfering RNA in Ca9-22 cells led to expression of active caspase 3, thus indicating apoptosis induction. The tongue cancer cell line SCC-25, which expresses PHLDA1 at a high level, showed similar effects. Our data indicate that H₂S is an anti-cancer compound that may contribute to the low incidence of oral cancer. Furthermore, we demonstrated the role of PHLDA1 as an apoptosis suppressor.     

Deformation of articular cartilage during static loading of a knee joint – Experimental and finite element analysis

Novel conical beam CT-scanners offer high resolution imaging of knee structures with i.a. contrast media, even under weight bearing. With this new technology, we aimed to determine cartilage strains and meniscal movement in a human knee at 0, 1, 5, and 30 min of standing and compare them to the subject-specific 3D finite element (FE) model. The FE model of the volunteer?s knee, based on the geometry obtained from magnetic resonance images, was created to simulate the creep. The effects of collagen fibril network stiffness, nonfibrillar matrix modulus, permeability and fluid flow boundary conditions on the creep response in cartilage were investigated. In the experiment, 80% of the maximum strain in cartilage developed immediately, after which the cartilage continued to deform slowly until the 30 min time point. Cartilage strains and meniscus movement obtained from the FE model matched adequately with the experimentally measured values. Reducing the fibril network stiffness increased the mean strains substantially, while the creep rate was primarily influenced by an increase in the nonfibrillar matrix modulus. Changing the initial permeability and preventing fluid flow through noncontacting surfaces had a negligible effect on cartilage strains. The present results improve understanding of the mechanisms controlling articular cartilage strains and meniscal movements in a knee joint under physiological static loading. Ultimately a validated model could be used as a noninvasive diagnostic tool to locate cartilage areas at risk for degeneration.     

Image analysis of rat satellite cell proliferation in vitro

Myogenic cells were isolated from adult rat skeletal muscles and cultured in vitro. Cell proliferation was analyzed between days 1 and 14. The cell cycle phases were determined by examining Feulgen-stained cultures with a cell image processor. The nuclei were automatically analyzed by calculating 18 parameters relating to the texture and densitometry of chromatin and the shape of each nucleus. Cell cycle phases were characterized (Moustafa and Brugal, 1984). The recognition methods made it possible to analyse the nuclei of the myogenic cell populations which were either involved in each phase of the mitotic cycle, or left out of the cycle after fusion into myotubes.After 3 hr of culture 10% of the cell population was involved in the cell cycle. In the presence of foetal calf serum, this percentage increased until day 3 after plating. At that time, the DNA content of 28.2% of the cell population was higher than 3C, whereas it is 2C in G1 or G0 nuclei; image analysis showed that 42% of these cells were in S or G2 phase. From day 4, the proliferation rate gradually slowed down until day 8. After day 8, when numerous myotubes differentiated, the percentage of S and G2 phase cells had diminished to between 3 and 8%. The percentage of nuclei in G0 increased when the first myotubes differentiated around day 5. Myotube nuclei were largely in G0. When horse serum was added to the culture medium on day 4 to enhance myotube differentiation, significant cell proliferation was observed before cell fusion.These methods of analysis give the first daily pattern of myogenic cell proliferation and fusion in a cell population isolated from adult muscles.     

Effect of reproductive modes and environmental heterogeneity in the population dynamics of a geographically widespread clonal desert cactus

The dynamics of plant populations in arid environments are largely affected by the unpredictable environmental conditions and are fine-tuned by biotic factors, such as modes of recruitment. A single species must cope with both spatial and temporal heterogeneity that trigger pulses of sexual and clonal establishment throughout its distributional range. We studied two populations of the clonal, purple prickly pear cactus, Opuntia macrocentra, in order to contrast the factors responsible for the population dynamics of a common, widely distributed species. The study sites were located in protected areas that correspond to extreme latitudinal locations for this species within the Chihuahuan Desert. We studied both populations for four consecutive years and determined the demographic consequences of environmental variability and the mode of reproduction using matrix population models, life table response experiments (LTREs), and loop and perturbation analyses. Although both populations seemed fairly stable (population growth rate, λ∼1), different demographic parameters and different life cycle routes were responsible for this stability in each population. In the southernmost population (MBR) LTRE and loop and elasticity analyses showed that stasis is the demographic process with the highest contributions to λ, followed by sexual reproduction, and clonal propagation contributed the least. The northern population (CR) had both higher elasticities and larger contributions of stasis, followed by clonal propagation and sexual recruitment. Loop analysis also showed that individuals in CR have more paths to complete a life cycle than those in MBR. As a consequence, each population differed in life history traits (e.g., size class structure, size at sexual maturity, and reproductive value). Numerical perturbation analyses showed a small effect of the seed bank on the λ of both populations, while the transition from seeds to seedlings had an important effect mainly in the northern population. Clonal propagation (higher survival and higher contributions to vital rates) seems to be more important for maintaining populations over long time periods than sexual reproduction.     

Diversification of the RAB Guanosine Triphosphatase Family in Dicots and Monocots

RAB guanosine triphosphatases （GTPases） are key regulators of vesicle trafficking and are essential to the growth and development of all eukaryotic cells. During evolution, the RAB family has expanded in different patterns to facilitate distinct cellular, developmental and physiological adaptations. Yeast has only 11 family members, whereas mammalian RABs have expanded to 18 RAB subfamilies. Plant RABs have diversified primarily by duplicating members within a single subfamily. Plant RABs are divided into eight subfamilies, corresponding to mammalian RAB1, RAB2, RAB5, RAB6, RAB7, RAB8, RAB11 and RAB18. Functional diversification of these is exemplified by the RAB1 ls, orthologs of which are partitioned into unique cell compartments in plants where they function to transport vesicles during localized tip growth. Similarly, the RAB2 family in grasses is likely involved in vesicle secretion associated with wall expansion, as determined by analysis of over-expression mutants. We propose that dicots and monocots have also diverged in their RAB profiles to accommodate unique cellular functions between the two groups. Here we present a bioinformatics analysis comparing the RAB sub-families of rice, maize and Arabidopsis. These results will guide future functional studies to test for the role of diversification of subfamilies unique to monocots compared to dicots.     

藜磷酸肌醇5-磷酸酶基因(CaP5P)的表达分析和胁迫响应检测

植物通过多种信号途径感知外界环境变化,从而引发一系列的信号级联反应,其中磷脂信号途径起着重要的作用。本研究从藜盐胁迫差减文库中获得了一个EST05序列,利用RT-PCR检测了其在非生物胁迫下表达趋势,显示EST05序列在非生物胁迫下的表达有升高。随后利用RACE技术获得其全长编码序列,测序结果显示其与蓖麻(Ricinus communis) 的磷酸肌醇5-磷酸酶基因(P5P)的同源性达56%,遂将其命名为CaP5P。最后过量表达CaP5P在拟南芥中初步验证了功能,转基因植株表现对盐胁迫耐受性降低的趋势,呈现负调控的特征。本研究对磷酸肌醇5-磷酸酶基因功能的初步研究为磷脂信号途径中负调控组分的分析提供了参考依据。     

Validation of density–elasticity relationships for finite element modeling of human pelvic bone by modal analysis

In total hip arthroplasty and particularly in revision surgery, computer assisted pre-operative prediction of the best possible anchorage strategy for implant fixation would be a great help to the surgeon. Computer simulation relies on validated numerical models. In the current study, three density–elasticity relationships (No. 1–3) from the literature for inhomogeneous material parameter assignment from CT data in automated finite element (FE) modeling of long bones were evaluated for their suitability for FE modeling of human pelvic bone. Numerical modal analysis was conducted on 10 FE models of hemipelvic bone specimens and compared to the gold standard provided by experimental modal analysis results from a previous in-vitro study on the same specimens. Overall, calculated resonance frequencies came out lower than measured values. Magnitude of mean relative deviation of numerical resonance frequencies with regard to measured values is lowest for the density–elasticity relationship No. 3 (−15.9%) and considerably higher for both density–elasticity relationships No. 1 (−41.1%) and No. 2 (−45.0%). Mean MAC values over all specimens amount to 77.8% (No. 1), 78.5% (No. 2), and 83.0% (No. 3). MAC results show, that mode shapes are only slightly influenced by material distribution. Calculated resonance frequencies are generally lower than measured values, which indicates, that numerical models lack stiffness. Even when using the best suited (No. 3) out of three investigated density–elasticity relationships, in FE modeling of pelvic bone a considerable underestimation of model stiffness has to be taken into account.     

Relationship between leptin receptor and polycystic ovary syndrome

Polycystic ovary syndrome (PCOS) is one of the most common endocrine disorders, which is involved in the multi-system disease, and its etiology is still not clearly understood. It is currently considered that not only the genetic factors but also the environment factors play a crucial role in the pathogenesis of PCOS. Obesity plays an important role through the insulin, leptin and endocannabinoid system in the pathological process of PCOS, leading to more severe clinical manifestations. The aim of our present study is to investigate whether there is association between single nucleotide polymorphisms (SNPs) of Gln223Arg and Pro1019Pro in the leptin receptor gene (LEPR) and PCOS in a Korean population. Interestingly, a significant association was found between the Pro1019Pro in LEPR gene and PCOS, and a highly significant association was found between the Gln223Arg in LEPR gene and PCOS (P = 0.033, OR = 1.523, 95% confidence interval and P < 0.0001, OR = 0.446, 95% confidence interval). Moreover, genotype combination and haplotype analyses indicate that Gln223Arg and Pro1019Pro polymorphisms of LEPR are significantly associated with the risk of PCOS.     

Morphological and genetic relationship of two closely‐related giant water bugs: Appasus japonicus Vuillefroy and Appasus major Esaki (Heteroptera: Belostomatidae)

The East Asian giant water bug species Appasus japonicus Vuillefroy and Appasus major Esaki are aquatic hemipteran insects whose ranges overlap, particularly in the Japanese Archipelago and on the Korean Peninsula. In rare cases, the two species co‐occur. Furthermore, they are very similar ecologically and also morphologically, making their identification extremely difficult, and the possibility of hybridization has also been suggested. In the present study, we re‐examined their taxonomic validity, and the characteristics useful for identifying them. To re‐examine the morphological traits useful for distinguishing these two species, 222 specimens of A. japonicus collected from Japan, Korea, and China, and 132 specimens of A. major from Japan and Korea, were examined. We also performed molecular phylogenetic analyses based on the mitochondrial DNA 16S rRNA and cytochrome oxidase subunit I (COI) regions and the nuclear DNA Histone 3 region. Although the two species are very similar ecologically and also morphologically, they showed significant genetic differentiation. Thus, there is likely some form of reproductive isolation acting between them. Major morphological characteristics overlap extensively between A. japonicus and A. major, and no particular trait was identified as being effective for differentiating these species. All the morphological characteristics examined overlapped between A. japonicus and A. major. However, a principal component analysis based on all of the morphological characteristics revealed that, despite the overlap between these species, it was possible to morphologically distinguish them. Therefore, a more accurate identification becomes possible using multiple characteristics rather than a single characteristic. The male genital paralobes, evaluated as the most useful morphological characteristic, was effective with 100% probability for the Japanese Appasus species. However, for the Asian (i.e. Korean) specimens, this characteristic was not useful. On the other hand, the results of molecular phylogenetic analyses based on the mitochondrial DNA 16S rRNA and COI regions and the nuclear DNA Histone 3 region clearly showed significant genetic differentiation between the two species. Notably, the results for the mitochondrial COI region strongly supported the independence of each monophyletic group (i.e. validity of each species). Therefore, DNA barcoding based on the mitochondrial DNA COI region is also considered useful for the identification of A. japonicus and A. major. © 2013 The Linnean Society of London, Biological Journal of the Linnean Society, 2013, 110 , 615–643.     

Geochemistry and Microbial Populations in Sediments of the Northern Baffin Bay,Arctic

The Northern Baffin Bay between Greenland and Canada is a remote Arctic area restricted in primary production by seasonal ice cover, with presumably low sedimentation rates, carbon content and microbial activities in its sediments. Our aim was to study the so far unknown subseafloor geochemistry and microbial populations driving seafloor ecosystems. Shelf sediments had the highest organic carbon content, numbers of Bacteria and Archaea, and microcosms inoculated from Shelf sediments showed highest sulfate reduction and methane production rates. Sediments in the central deep area and on the southern slope contained less organic carbon and overall lower microbial numbers. Similar 16S rRNA gene copy numbers of Archaea and Bacteria were found for the majority of the sites investigated. Sulfate in pore water correlated with dsrA copy numbers of sulfate-reducing prokaryotes and differed between sites. No methane was found as free gas in the sediments, and mcrA copy numbers of methanogenic Archaea were low. Methanogenic and sulfate-reducing cultures were enriched on a variety of substrates including hydrocarbons. In summary, the Greenlandic shelf sediments contain vital microbial communities adapted to their specific environmental conditions.